Зарегистрируйтесь

Product Finder

Настройки

Useful links

Живой чат
 
[["US","AU","GB","DE"]]
Зарегистрируйтесь
Shipped From:
  • USA

Esun 3D Волокно Принтер черный 1.75mm PLA 1KG Ролл

Esun 3D Волокно Принтер черный 1.75mm PLA 1KG Ролл

Now save сэкономь 0,00 руб. 0,00 руб.

1 378,66 руб.
Нет в наличии!
Stock:
OUT OF STOCK
Вес:
1 g
Артикул:
566000065-0

Suggestion Box

Please let us know if you found any issues with this product listing.
We take our customer comments very seriously and in many cases our website modifications and product updates are a result of your comments!

Война цен

If you've seen a product elsewhere for a better price, please let us know! HobbyKing pride themselves on offering the best price, so if there if you see something cheaper elsewhere, let us know!

Описание
товара

HobbyKing возбуждается, чтобы нести полный спектр марки Esun в 3D печати нити. Esun признан одним из ведущих и самых инновационных в мире производителей для 3D аддитивной печати.

PLA, ABS, гибкие, Светящиеся и многие другие типы материалов, идеально подходят для любой приложение, которое вы имеете в виду. Esun установил их признание бренда через свои качества продукции и консистенции, нити имеют стабильные точки плавления, хорошую круглую форму и, самое главное 0.05mm равномерный допуск по диаметру для последовательной скорости потока.

PLA:
PLA имеет более низкую температуру плавления и печатает легче, чем другие материалы. Одной из наиболее важных особенностей является то, что НОА не токсичен, и даже имеет сладкий запах при печати. PLA имеет низкий уровень усадки и очень жесткая с минимальным прогибается. Этот материал может печатать модели очень высоким разрешением и идеально подходит для широкого спектра применений. PLA считается сильнее, чем ABS, но более восприимчивы к образованию трещин при сгибании, удар или крутильные нагрузки таким образом, механические потребности проекта печати должна быть оценена.

PLA имеет огромный диапазон ярких цветов и непрозрачности для этого идеальный внешний вид, будь то художественный или утилитарный, в короткий большой материал для 3D-печати. НОА может быть напечатан без использования тепла бусинки, и может прилипать к стеклу или пластины на печатной плате со связующим, таким как лак для волос или белый клей для ротора свободной печати.

3D печать является увлекательным и захватывающим хобби с широким диапазоном применения от прототипирования деталей для изготовления игрушек для детей. Выбор правильного нити для вашего приложения очень важно. Пожалуйста, посетите веб-сайт Esun для получения дополнительной информации, а также рекомендуемые настройки для вашего принтера.

http://en.esunchina.net/index.aspx

Особенности:
• Стабильная температура плавления
• Хорошая круглая форма
• Равномерное диаметр допуск 0,05мм
• Согласованные цвета

Технические характеристики:
Нить Материал: PLA
Нить Диаметр: 1.75mm
Количество: 1 кг
Цвет: черный

Product
Specifications

Дополнительная информация

  • Артикул:
    566000065-0
  • Brand:
    Не применимо
  • Емкость ( мАч )
    Нет
  • Вес ( г )
    1680.00
  • длина:
    220.00
  • ширина:
    75.00
  • Высота
    210.00
Community
Discussions
Rate&
Review

Напишите ваш собственный отзыв

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
Very good quality product. It comes vacum sealed with a silica bag. The prints look amazing with this fillament, this is the best fillament I used so far.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
NOTE! Forgot about the default crown rating and just hit Post, I have corrected this.

I purchased 3 rolls of the black PLA and I have to say the quality matches the price (not very good quality product). It prints but has a very rough top surface finish with small pieces of black flakes released to the surface from the melted PLA, not sure what cheap additives are within this product to help make up cheap bulk in this material. Also it does not have the normal pleasant PLA sweet smell, it smells more chemical based.

I normally buy American PLA and am used to buttery smooth PLA Prints and material finish. But tried this because it was available locally in Australia.

This product just does not deliver, not sure what the hell Lulzbot are doing promoting it. I also use the E3D hot end as per previous reviewer (L2smith2) but his material must have come from a different manufacturer as my conclusions / experiences are different.

Not saying you should not buy this it prints but be aware of what you are getting for the price.
Regards


verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I purchased 3 rolls of the black PLA and I have to say the quality matches the price. It prints but has a very rough top surface finish with small pieces of black flakes released from the melted PLA, not sure what additives are within to help make up bulk in this material. I normally buy American PLA and am used to buttery smooth PLA Prints and material. This product just does not deliver, not sure what the hell Lulzbot are doing promoting it.

I also use the E3D hot end as per previous reviewer but his material must have come from a different manufacturer.

Regards
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I just started printing with this filament and it prints fine on a Crafbot 3D Printer. Unfortunately I also found it broke today. I printed two days ago and today I looked at the filament and it's broken right before it goes into the feeding tube. It's just sitting there so I had not touched it since I printed so it looks like it may be a bit brittle even though it does print fine. This is not what you want to have if you print large prints. The last thing you want is for the filament to break after hours of printing. Needless to say I am just starting to use it, but only time will tell. I think this is more a manufacturing issue than how long it has been sitting at a warehouse since they come in a plastic sealed bag. But I'll keep testing it for now. Someone who had used this brand mention they got this at the end of their roll. I just started using mine, so this is why I think it's how they make it that makes the difference if it keeps breaking. I won't know just yet until I used it more. This is also just the first roll that I have opened up.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I was sceptical filament this cheap would be any good so I bought it to use on parts that didn't need to be good quality. Very surprised how well this filament prints and has a nice smooth finish. No problems so far with layer or bed adhesion. Printing on a rostock max v2 with e3d hotend, 215C and 70C for heatbed (garage the printer is in is 10C) definitely worth buying a few rolls
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Very impressive. Comes in a nice retail box. Inside the spool is vacuum sealed in very strong clear plastic. Also some silica bags are shrinked inside, just in case.
verified_user Quality
trending_up Value
playlist_add_check Overall
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Метки товара

Используйте пробелы для отделения меток. Используйте одинарные кавычки (') для фраз.