New Items ФОРУМ
Зарегистрируйтесь

Итоговая цена

0,00 руб.

Cart 0 Cart 0 Loading...

Extended Landing Skid Комплект для SK450 Quadcopter Рамка

Extended Landing Skid Комплект для SK450 Quadcopter Рамка

Shipped From:
  • USA
  • Global
QTY:

Now save сэкономь 0,00 руб. 0,00 руб.

849,66 руб.
Статус:
Есть в наличии
SKU:
9171000151
WANT FREE SHIPPING? Click here to find out more!

Хотите установить камеру под вашим SK450 несколькими роторами кадр поймать некоторые радикальные воздушные видео? С этой расширенной посадки на салазках установлен, вы можете!

Изготовлен из прочного легкого еще стекловолокна, эти расширенные посадки полозья до задачи поддержки вам аэрофотосъемки мульти-ротор кадр. Этот набор занос увеличивает дорожный просвет от 32мм до 180мм от нижней части основной рамы пластины.

Этот набор включает в себя посадку занос все оборудование, необходимое для установки и не требует модификации вашего кадра. Они просто болт на фондовом посадки салазки вашего SK450.

* Примечание: Это расширенная посадка на салазках установлен только, SK450 мульти-ротор рама продается отдельно

Технические характеристики:
Длина: 200 мм ( в целом)
Толщина стекла волокна: 1.5mm
Вес: 93g (ж / все аппаратное обеспечение)

Включает:
Полная расширенная посадка на салазках установлен
Все необходимое оборудование

  • Артикул 9171000151
  • Brand Unknown
  • Емкость ( мАч ) -
  • вес 109.0000
  • длина 210.00
  • Width 15.00
  • Высота 40.00
  • SK450 Extension Arms
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

genial para elevar cuerpo y no romper prop al aterrizar

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

genial para elevar cuerpo y no romper prop al aterrizar

Well made and fit well on a Q450 frame. Would be good if there could be an additional strengthening bar available as they make the drone "wobble" a bit on low power take offs, but that's really not something I notice often and it doesn't affect the flight at all.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Well made and fit well on a Q450 frame. Would be good if there could be an additional strengthening bar available as they make the drone "wobble" a bit on low power take offs, but that's really not something I notice often and it doesn't affect the flight at all.

Not totally happy with this, I used it with the dead cat and when I fired her up the drone would fall over.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Not totally happy with this, I used it with the dead cat and when I fired her up the drone would fall over.

Excellent landing skid with enough clearance for my camera and FPV gear. It attached perfectly to my F450 frame

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Excellent landing skid with enough clearance for my camera and FPV gear. It attached perfectly to my F450 frame

Easy to set up and relatively strong. Very helpful if you are carrying a lot of gear.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Easy to set up and relatively strong. Very helpful if you are carrying a lot of gear.

simple to install and remove and gives you enough extra height to put the underside of the SK450 to use.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

simple to install and remove and gives you enough extra height to put the underside of the SK450 to use.

This is a great set of landing gear for the SK450, and/or the SK450 Deadcat. Defiantly a must for adding a gimbal or FPV fear. I was surprised to find out its actually a great set of landing gear.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This is a great set of landing gear for the SK450, and/or the SK450 Deadcat. Defiantly a must for adding a gimbal or FPV fear. I was surprised to find out its actually a great set of landing gear.

These landing skids fot perfectly on a DJI F450. You can install them in two different ways (pointing inwards, like on the picture) or pointing outwards. Both ways can be done without drilling ! Just fix the skids around the existing short landing legs of your F450.

With these skids, the F450 has sufficient ground clearance to carry even somewhat larger gimbals !

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

These landing skids fot perfectly on a DJI F450. You can install them in two different ways (pointing inwards, like on the picture) or pointing outwards. Both ways can be done without drilling ! Just fix the skids around the existing short landing legs of your F450.

With these skids, the F450 has sufficient ground clearance to carry even somewhat larger gimbals !

Very nice quality, well cut and came exactly as advertised. I run them on my Deadcat conversion. I recommend instead of directly screwing them onto the frame like you're supposed to but to attach them to the frame with zip ties so they break away if you have a bad landing.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Very nice quality, well cut and came exactly as advertised. I run them on my Deadcat conversion. I recommend instead of directly screwing them onto the frame like you're supposed to but to attach them to the frame with zip ties so they break away if you have a bad landing.

Sehr gute Qualitaet und Verarbeitung. Ich montierte dieses Landegestell an einen TBS-Discovery.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Sehr gute Qualitaet und Verarbeitung. Ich montierte dieses Landegestell an einen TBS-Discovery.

  1. 1
  2. 2
  3. 3
Customer files
cUT SKIDS Download [155]
CUT SKIDS 1 Download [159]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!