New Items ФОРУМ
Зарегистрируйтесь

Итоговая цена

0,00 руб.

Cart 0 Cart 0 Loading...

Extra 330 Бало подключи и Fly 1500мм для 6с ж / двигателя / ESC / MG Servo

Extra 330 Бало подключи и Fly 1500мм для 6с ж / двигателя / ESC / MG Servo

Discontinued Product

Please continue searching for a similar product.
WANT FREE SHIPPING? Click here to find out more!

Когда-либо воображал с размером 3D приличное или бальзы самолет пилотажной Sport летать, но были сбиты с толку настроенных выборов? Или, может быть, вы просто хотите большой бальзы спортивный самолет, который может быть собран в двойном быстром времени? Если это так, отлично выглядит и очень способный Extra 330 для вас!

Все бальзы строительство этого славного размера Extra красиво сделано, как это умело применяется покрытие. Уровень предварительной сборки очень высока для модели бальзы, мощный скороход бесщеточный двигатель, ESC и Metal Gear цифровой сервопривод имеют все заранее установленные! После того, как из коробки, вам нужно просто приклеить на горизонтальный стабилизатор, винт в шаре связаны толкателей, болт на превосходной ходовой частью из углеродного волокна, соорудить тянуть / тянуть руль и вы в основном хорошо идти! Крылья подключить, как и следовало ожидать, и установлены на большой, но легкий CF трубки, большой навес крепится с помощью надлежащей защелки и могут быть доступны в секундах для быстрой замены батареи, так как смотреть и выполнять блестяще, Экстра также практично!

Существует никаких сомнений в том, что это Extra очень способный 3D плоскости, но быть масштабная модель, она также отлично подходит для спортивных пилотажных х годов и учитывая его размеры, Extra является идеальной моделью размера клуба. Яркая схема отлично подходит для ориентации, а также мощный предустановлена ​​двигатель качает 15x8 опору на 6 секунд, более чем достаточно для любого типа полета! Это Extra 330 является большим нетерпением и очень способный модель, которая предлагает удобство пенистого в сочетании с прочностью, производительностью и точностью, что только бальзы может предложить!

Особенности:
Прочные, но легкие Бало Строительство
Отличный уровень отделки с отменно Applied покрытием и покрашены GF Клобук & Wheel Брюки
Большие поверхности управления, идеально подходит для 3D
Отличная схема для ориентации
Pre-Installed Мотор, ESC и серво
GF качалку Extensions & Horns
Шаровые связанный толкателей
Вытащите / Pull Rudder Control
6S Сила Swinging 15x8 Опора для Удивительное вертикального исполнения
Расширенный уровень Pre-Finish для быстрой и простой монтаж
Углеродное волокно Undercarriage & Wing Tube
Plug In Крылья для легкой транспортировки

Технические характеристики:
Размах: 1500мм
Длина: 1500мм
Полетный вес: 3000г (приблизительно в зависимости от LiPoly Емкость)
Площадь крыла: 46.2dm2
Нагрузка на крыло: 54.1g ~ 71g дм2
Двигатель: 500кВ Brushless Походный
ESC: 80A ж / ЦМП
Сервопривод: Digital Metal Gear X 5
Spinner: пластик ж / сплава Backplate
Поддерживают: 15x8

Требуется:
Ваш собственный 5 ~ 6-канальный TX / RX
Батарея 4000mAh ~ 5000mAh 6S LiPoly

  • Артикул 189000031
  • Brand -
  • Емкость ( мАч ) -
  • вес 5995.0000
  • длина 1365.00
  • Width 295.00
  • Высота 420.00
  • Extra 330 Balsa Plug and Fly 1500mm for 6s w/Motor/ESC/MG Servo
  • Extra 330
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up





all servos are bad . the servo output arms are not glued properly . My model has crashed due to a defective elevator servo.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:





all servos are bad . the servo output arms are not glued properly . My model has crashed due to a defective elevator servo.

Make sure you check the canopy lock. The pin on mine retracted and the canopy flew off in flight and was damaged when it hit the ground. :( Make sure you pull the wire pin forward and make sure it has engaged the ply former properly before taking off. Also, check the temperature of the motor and look at cooling. I cut a hole in the bottom of my cowl (as per full size) to let hot air out and am contemplating adding air deflectors on the 2 air inlets either side of the motor to direct cool air onto it and blocking off the centre inlet. There is no hot air outlet. My motor got very hot after one flight. I changed the ESC timing settings to see if that will help.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Make sure you check the canopy lock. The pin on mine retracted and the canopy flew off in flight and was damaged when it hit the ground. :( Make sure you pull the wire pin forward and make sure it has engaged the ply former properly before taking off. Also, check the temperature of the motor and look at cooling. I cut a hole in the bottom of my cowl (as per full size) to let hot air out and am contemplating adding air deflectors on the 2 air inlets either side of the motor to direct cool air onto it and blocking off the centre inlet. There is no hot air outlet. My motor got very hot after one flight. I changed the ESC timing settings to see if that will help.

I probably had a similar experience to some of the other reviews but I thought I would itemise my points:
- Kit was delivered in a big plain double skinned box. Nicely wrapped parts and nothing was damaged inside. Everything as advertised.
- Structure is nice, looks like decent laser cutting and glue. No big blobs of hot melt glue so what ever glue it used, it is neat and tidy.
-Covering on my model was very good, cannot really complain. Iron on as opposed to self adhesive which is good. Will have to see how it copes with lots of use. Had to sick the graphics on the model and there were no pictures in the instructions I received to show me the reference points. I used the pictures on the HK site as a guide.
- Nice CF undercarriage. Shame the spats don't have anti-rotation screws, etc.
- I found the ailerons and rudder warped, had to heat the covering to straighten the control surface. I believe this is pretty normal with ARTF's. Straighten them before gluing the hinges, especially the rudder!
- I had to ask HK for a copy of the assembly manual which had the CG location but no control surface throw recommendations. I emailed support and received those and also the ESC manual.
- The ESC was faulty from new. Send videos to HK support and they shipped a new one. Can't really complain about support. Hopefully my motor lasts.
- I can't say I have had a problem with the

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I probably had a similar experience to some of the other reviews but I thought I would itemise my points:
- Kit was delivered in a big plain double skinned box. Nicely wrapped parts and nothing was damaged inside. Everything as advertised.
- Structure is nice, looks like decent laser cutting and glue. No big blobs of hot melt glue so what ever glue it used, it is neat and tidy.
-Covering on my model was very good, cannot really complain. Iron on as opposed to self adhesive which is good. Will have to see how it copes with lots of use. Had to sick the graphics on the model and there were no pictures in the instructions I received to show me the reference points. I used the pictures on the HK site as a guide.
- Nice CF undercarriage. Shame the spats don't have anti-rotation screws, etc.
- I found the ailerons and rudder warped, had to heat the covering to straighten the control surface. I believe this is pretty normal with ARTF's. Straighten them before gluing the hinges, especially the rudder!
- I had to ask HK for a copy of the assembly manual which had the CG location but no control surface throw recommendations. I emailed support and received those and also the ESC manual.
- The ESC was faulty from new. Send videos to HK support and they shipped a new one. Can't really complain about support. Hopefully my motor lasts.
- I can't say I have had a problem with the

Colis reu en parfait tat mais entoilage de la drive mal ralis (vrille). Une vrification complte des fixations est faire! Manque de colle a tous les niveaux ! Manque balsa pour fixation capot moteur ....
Problme liaison esc-moteur ( bruits a diffrent rgime et surchauffe moteur aprs 3 min de vol ). surement le PWN donc changer esc et plus de bruit!
Moteur cram apres 3 vols. ( a ce demander si c'est pas un moteur 5s )
Le premier achat dcevant chez hk !

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Colis reu en parfait tat mais entoilage de la drive mal ralis (vrille). Une vrification complte des fixations est faire! Manque de colle a tous les niveaux ! Manque balsa pour fixation capot moteur ....
Problme liaison esc-moteur ( bruits a diffrent rgime et surchauffe moteur aprs 3 min de vol ). surement le PWN donc changer esc et plus de bruit!
Moteur cram apres 3 vols. ( a ce demander si c'est pas un moteur 5s )
Le premier achat dcevant chez hk !

Review part 2: The fitted servos are too slow, especially for 3D flying and one of the elevator servos was 'sticky' until I partially dismantled it to free it up.
Flying - despite adding a little nose-weight to correct the CoG, the model is still very tail heavy and very, very sensitive in pitch, so needed shorter elevator throws and lots of exponential (70pcnt ).
Other than that, it will fly amazingly slowly, nose high without dropping a wing. Also surprisingly the stall is relatively clean. There is plenty of power and most of the time it will needs only 1/2 to 2/3 throttle. Above about 2/3 throttle it makes a lot of noise and vibration - Why? ESC timing? Prop is balanced but supplied bushes may be a problem? .Or is it the motor?
Prop hanging is relatively easy, especially for the small size and certainly much better than my now deceased electric EPO Thunderbolt, but not as nice a 55cc Edge 540 I have.
So, hopefully this will be a good model to teach myself 3D flying.
The wheels are really too small for flying off our grass strip so will dispense with the wheel pants and up-size the wheels.
Overall - I'm happy but a few things need to be sorted out before it becomes an enjoyable, reliable model.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Review part 2: The fitted servos are too slow, especially for 3D flying and one of the elevator servos was 'sticky' until I partially dismantled it to free it up.
Flying - despite adding a little nose-weight to correct the CoG, the model is still very tail heavy and very, very sensitive in pitch, so needed shorter elevator throws and lots of exponential (70pcnt ).
Other than that, it will fly amazingly slowly, nose high without dropping a wing. Also surprisingly the stall is relatively clean. There is plenty of power and most of the time it will needs only 1/2 to 2/3 throttle. Above about 2/3 throttle it makes a lot of noise and vibration - Why? ESC timing? Prop is balanced but supplied bushes may be a problem? .Or is it the motor?
Prop hanging is relatively easy, especially for the small size and certainly much better than my now deceased electric EPO Thunderbolt, but not as nice a 55cc Edge 540 I have.
So, hopefully this will be a good model to teach myself 3D flying.
The wheels are really too small for flying off our grass strip so will dispense with the wheel pants and up-size the wheels.
Overall - I'm happy but a few things need to be sorted out before it becomes an enjoyable, reliable model.

Review Part 1:
Hi Guys, I recently bought this model to replace my HK EPO SBach Thundebolt, which totalled itself after the Turnigy BEC failed.
The model is built to a high quality, but some minor issues let it down:
1. The film covering easily peels back in places and so the entire needs to be run over with an iron.
2. Not all screws are secure. Need to check all screws and nuts, adding Loctite where appropriate. I destroyed a wheel pant on landing, partly due to a loose nut.
3. Some parts are missing - specifically the nylon wing bolts. Also, it needs some wooden dowels (or pegs) fitting to the rear of each wing root . These should locate in already drilled holes in the fuselage when the wings are fitted, preventing the wings from rotating. Currently it relies just on the fuselage wing fairings to stop rotation which is insufficient IMHO.
4. Assembly instructions - tiny pictures and insufficient or no supporting wording. Not at all useful unfortunately.
5. I fitted 5000mAH 6S Nanotech battery packs, but the C o G was still just behind the recommended point.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Review Part 1:
Hi Guys, I recently bought this model to replace my HK EPO SBach Thundebolt, which totalled itself after the Turnigy BEC failed.
The model is built to a high quality, but some minor issues let it down:
1. The film covering easily peels back in places and so the entire needs to be run over with an iron.
2. Not all screws are secure. Need to check all screws and nuts, adding Loctite where appropriate. I destroyed a wheel pant on landing, partly due to a loose nut.
3. Some parts are missing - specifically the nylon wing bolts. Also, it needs some wooden dowels (or pegs) fitting to the rear of each wing root . These should locate in already drilled holes in the fuselage when the wings are fitted, preventing the wings from rotating. Currently it relies just on the fuselage wing fairings to stop rotation which is insufficient IMHO.
4. Assembly instructions - tiny pictures and insufficient or no supporting wording. Not at all useful unfortunately.
5. I fitted 5000mAH 6S Nanotech battery packs, but the C o G was still just behind the recommended point.

Leider bin ich mit dem im Modell eigebauten Teile wie Servos,Regler und Motor nicht zufrieden. Der Motor hat im einen Lgerschaden(hohes Laufgeraesch mit Vibationen),der Regler hat ein unsauberes Regelverhalten(stottern beim Hochlaufen) und die Servos haben keine praeziese Rckstellung.Diese Teile sind mal wieder Chinamuell!!!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Leider bin ich mit dem im Modell eigebauten Teile wie Servos,Regler und Motor nicht zufrieden. Der Motor hat im einen Lgerschaden(hohes Laufgeraesch mit Vibationen),der Regler hat ein unsauberes Regelverhalten(stottern beim Hochlaufen) und die Servos haben keine praeziese Rckstellung.Diese Teile sind mal wieder Chinamuell!!!

very nice accro plane - powerful - motor burned after 40 minutes
flight - elevator servos must also be replaced.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

very nice accro plane - powerful - motor burned after 40 minutes
flight - elevator servos must also be replaced.

Mine arived with some damage to the cowl an vertical stabilizer. Servos seems to be very low quality, but in general the model flys well. its impresively light and aparently it is very fragile to. As other buyers already stated it has absolutely no information about eletric motor, esc, servos or whatever.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Mine arived with some damage to the cowl an vertical stabilizer. Servos seems to be very low quality, but in general the model flys well. its impresively light and aparently it is very fragile to. As other buyers already stated it has absolutely no information about eletric motor, esc, servos or whatever.

Nice structure design, low quality assembly, bent ribs in the wings, covering peals out.
Low quality packaging, the kit arrived with a torn covering on one of the ailerons and a hole in fuselage covering.
No assembly and set up manual and lack of information about motor, ECS and servos.
The following hardware parts were not included:
a. 4mm thumbscrews for the wings
b. Helen screws for linkage stoppers
c. Push-pull clevises were predrilled with a slight angle
Recommendations:
Reinstall ball-linked pushrods and pull/pull rudder control.
Reinstall and re-glue all control horns; half of the horns havent been bonded.
Apply CA over all bonded elements,
The airplane is tail heavy, use lypo pack to find the right CG location.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Nice structure design, low quality assembly, bent ribs in the wings, covering peals out.
Low quality packaging, the kit arrived with a torn covering on one of the ailerons and a hole in fuselage covering.
No assembly and set up manual and lack of information about motor, ECS and servos.
The following hardware parts were not included:
a. 4mm thumbscrews for the wings
b. Helen screws for linkage stoppers
c. Push-pull clevises were predrilled with a slight angle
Recommendations:
Reinstall ball-linked pushrods and pull/pull rudder control.
Reinstall and re-glue all control horns; half of the horns havent been bonded.
Apply CA over all bonded elements,
The airplane is tail heavy, use lypo pack to find the right CG location.

  1. 1
  2. 2
Customer files
Manual - Extra 330 Balsa Plug and Fly 15 Download [4962]
EXTRA 330 HK 1500mm Download [4962]
No File Name Download [149]
No File Name Download [129]
No File Name Download [99]
No File Name Download [100]
No File Name Download [218]
No File Name Download [97]
No File Name Download [143]
No File Name Download [339]
  1. 1
  2. 2
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save