New Items ФОРУМ
Зарегистрируйтесь

Итоговая цена

0,00 руб.

Cart 0 Cart 0 Loading...

Рама 330мм F330 Стекловолокно Mini Quadcopter

Рама 330мм F330 Стекловолокно Mini Quadcopter

Discontinued Product

Please continue searching for a similar product.
WANT FREE SHIPPING? Click here to find out more!

F330 является хорошо продуманная 330мм четырехъядерный рама построен из качественных материалов. Основной каркас из стекловолокна, а руки изготовлены из прочного полиамида ультра нейлона.

Ассамблея является ветер с предварительно резьбовые латунные втулки для всех рамных болтов, так что никакие блокирующие контргайки не требуется. Он использует один размер болтов для всей сборки, что делает оборудование очень легко содержать в порядке и только требует один размер шестигранника для сборки.

Полезной особенностью этого кадра большие монтажные петли, расположенные в передней и задней части основной рамы нижней пластины для установки камер или других аксессуаров. Это делает отличный способ, чтобы взять воздушное видео или летать FPV без необходимости добавления каких-либо дополнительных монтажных кронштейнов.

F330 также имеет цветные руки (2 белых и 2 красных), которые прекрасно подходят для ориентации. Это помогает держать вас летать в нужном направлении без необходимости в различных цветных реквизита.

Мы предлагаем полную линейку мульти-ротор электроники, таких как управление несколькими роторами платы, ESC и моторы. Это никогда не было проще и доступнее, чтобы получить четырехъядерный в воздухе!

Особенности:
• Встроенный из качественного стекловолокна и полиамидного нейлона
• Предварительно резьбовые латунные втулки для всех рамных болтов
• Цветные руки для ориентации, чтобы держать вас летать в правильном направлении
• Большие язычки крепления на главной раме нижней пластины для легкой установки камеры
• Простота сборки

Технические характеристики:
Ширина: 330мм
Высота: 48мм
Вес: 147г (ж / из электроники)
Крепление двигателя Отверстия под болты: 16 / 19мм

Необходимые:
4 х 28мм 1000 ~ 1200kv (или аналогичный размер / кв)
4 х 12 ~ 20 Amp ESC
4 х 7x5 ~ 8x4 Prop (2CW & 2CCW)
1 х Multi-Rotor Control Board HobbyKing
1 х 1000 батарея ~ 1800mAh 3s 11.1V LiPoly

  • Артикул 260000006
  • Brand -
  • Емкость ( мАч ) -
  • вес 193.0000
  • длина 160.00
  • Width 80.00
  • Высота 120.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Good frame for the price. There's a bit of a slight twist in the arms but hasn't effected performance

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Good frame for the price. There's a bit of a slight twist in the arms but hasn't effected performance

nice frame lightweight fit my multistar 2212-920 motor 9" props

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

nice frame lightweight fit my multistar 2212-920 motor 9" props

This little gem is a fantastic Quad frame kit! I have no issue with this little beasty and with Turnigy Aerodrive SK3 2822-1275 and some 8x4.5 props this thing is very quiet running. Im using the 12A afro esc and a kk2.15 mini board with very low gain settings and im getting 20 minutes with a 2200mah 40c! I covered mine in black carbon fiber vinyl on the bottom plate and red carbon-fiber vinyl on the top plate. Looks great with red Props and really has tons of power and is very Fun to fly.......I was racing against some rc truck's today and it was fun to win in sheer speed and even better to blast up to the moon after i would win each time and boy did the rc truck guys have problems keeping there eyes on there machines i mean how cool is a little zippy quad????

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This little gem is a fantastic Quad frame kit! I have no issue with this little beasty and with Turnigy Aerodrive SK3 2822-1275 and some 8x4.5 props this thing is very quiet running. Im using the 12A afro esc and a kk2.15 mini board with very low gain settings and im getting 20 minutes with a 2200mah 40c! I covered mine in black carbon fiber vinyl on the bottom plate and red carbon-fiber vinyl on the top plate. Looks great with red Props and really has tons of power and is very Fun to fly.......I was racing against some rc truck's today and it was fun to win in sheer speed and even better to blast up to the moon after i would win each time and boy did the rc truck guys have problems keeping there eyes on there machines i mean how cool is a little zippy quad????

nice frame, a bit heavy. perfect for first quad

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

nice frame, a bit heavy. perfect for first quad

This is a affordable lightweight frame great for beginners wishing to build a quadcopter. The top and bottom mounting plates are of adequate thickness and also flex a slight bit. However, the weakness of this frame is in the arms. The plastic is made of extremely poor quality. You can clearly see the molding and chiseling lines on the arms. The arms are easily snapped at the motor mounting section where it is thinner than the other parts. You can't buy replacement arms for this so either buy 2 kits or not at all, because you are bound to snap an arm.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This is a affordable lightweight frame great for beginners wishing to build a quadcopter. The top and bottom mounting plates are of adequate thickness and also flex a slight bit. However, the weakness of this frame is in the arms. The plastic is made of extremely poor quality. You can clearly see the molding and chiseling lines on the arms. The arms are easily snapped at the motor mounting section where it is thinner than the other parts. You can't buy replacement arms for this so either buy 2 kits or not at all, because you are bound to snap an arm.

Good quality parts on this if a little heavy but with the setup i'm running i don't have a problem in that way. setup is KK2.1.5 3s 2200, D2822/17 1100kv, 8x4.5 props, HobbyWing X-Rotor 20A OPTO ESC. its off the ground before 50pcnt throttle. would be nice if it had a 3rd deck on top though.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Good quality parts on this if a little heavy but with the setup i'm running i don't have a problem in that way. setup is KK2.1.5 3s 2200, D2822/17 1100kv, 8x4.5 props, HobbyWing X-Rotor 20A OPTO ESC. its off the ground before 50pcnt throttle. would be nice if it had a 3rd deck on top though.

Nice little quad frame - kind of brittle, though!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Nice little quad frame - kind of brittle, though!

Very pleased with this little frame as this was my frist quadcopter build. Not only pleased with the product, but the wealth of information on this site through videos Hobbyking has done, and the discussions. I have just ordered the F450 frame and the electronics to start my 2nd build now that I've got my first under my belt.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Very pleased with this little frame as this was my frist quadcopter build. Not only pleased with the product, but the wealth of information on this site through videos Hobbyking has done, and the discussions. I have just ordered the F450 frame and the electronics to start my 2nd build now that I've got my first under my belt.

The frame is pretty solid and the arms have little flex for me. Running 1400kv 28mm motors, 25A ESCs, 3-4 cell lipo, and a Multiwii flight controller. This thing is very fast and pretty tough. I've had a few crashes and yet to have an issue. The top plate will need to be drilled for a 30.5mm board or you can buy an adapter board and drill it. If you do this you can put a large battery in the bottom tray and fly for a while. This guy does sit low to the ground as well, do not plan to put the battery underneath without modification. Great buy, definitely would again.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

The frame is pretty solid and the arms have little flex for me. Running 1400kv 28mm motors, 25A ESCs, 3-4 cell lipo, and a Multiwii flight controller. This thing is very fast and pretty tough. I've had a few crashes and yet to have an issue. The top plate will need to be drilled for a 30.5mm board or you can buy an adapter board and drill it. If you do this you can put a large battery in the bottom tray and fly for a while. This guy does sit low to the ground as well, do not plan to put the battery underneath without modification. Great buy, definitely would again.

was a little surprised that its so brittle one crash snapped a leg it is cold here was very disappointed if you buy one get two for spare legs

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

was a little surprised that its so brittle one crash snapped a leg it is cold here was very disappointed if you buy one get two for spare legs

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. ...
  7. 7
Customer files
F330 with 450 heli landig skids Download [1940]
F330 KK2.0 Download [1960]
F330 DeadSquirrel FPV Download [1710]
F3330 DeadSquirrel bottom Download [628]
F330 DeadSquirrel FPV side Download [1222]
Miniquad Photo Download [592]
F330 frame for anti-vibration Download [1147]
330 built Download [1450]
f330 w/naze32 Download [542]
f330 w/naze32 Download [493]
  1. 1
  2. 2
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save