Зарегистрируйтесь

Product Finder

Настройки

Useful links

Живой чат
 
[["US","AU","GB","DE"]]
Зарегистрируйтесь
Shipped From:
  • USA

F9F Panther BYR Ручной запуск Version (ПНФ)

F9F Panther BYR Ручной запуск Version (ПНФ)

Discontinued Product

Please continue searching for a similar product.
Stock:
OUT OF STOCK
Вес:
3035 g
Артикул:
F9F-2-PNP-B

Combine

essential items and
battery
acc
Описание
товара

Grumman F9F Panther имел честь победы в США Navys первую победу в Skys над Кореей, когда он опрокинул Як 9 в воздухе для вовлечения воздуха. Разработан в конце 2МВ, с полетом девичья проходит в ноябре 1947 года, отлично выглядит самолет не был в эксплуатации передней линии долгое время, прежде чем заменить новыми прокатившихся конструкции крыла, и закончил свою карьеру в основном в резервных эскадрилий. Несмотря на эту короткую карьеру в авиации терминах, пантера имеет много поклонников.

Это очень масштабироваться ищет модель EPO очень делает справедливость пантера, и выглядит потрясающе в небе с тех огромных красочных танков крыла. Очень мощный сплав EDF блок поставок много тяги и звучит фантастически, производительность превосходно даже на 3s с большим количеством вертикали. Будучи версии ручной запуск дает вам варианты втягивается если вы так хотите, как монтажные пластины предварительно установлены. Все высокие сервоприводы крутящий момент предварительно установлены, как это полностью программируемый ESC и UBEC, который дает возможность 4.8V или 6V выход на RX.

Это масштабная модель качества, которая является немного более сложным, чем меньше среднего Plug N Fly с точки зрения сборки, но награда за пилот RC является одним из лучших моделей пены летающих и глядя в классе 70мм.

Технические характеристики:
Размах: 1050мм
Длина: 1000мм
Полетный вес: 1000 ~ 1100g
EDF: Сплав 68мм с 2848 БПТ Inrunner 4370kv (статическая тяга на 3s - 1150g ~ 1200g)
ESC: 60A ОРТО
UBEC: 3A ~ 5A
Сервопривод: 4 х 9g High Torque

Включает:
Все комплектующие
инструкции
Всестороннее Decal Sheet

Требуется:
Ваш собственный 4-канальный TX / RX
3700mAh 3s ~ 5000mAh 3s LiPoly батареи

Product
Specifications

Дополнительная информация

  • Артикул:
    F9F-2-PNP-B
  • Brand:
    Не применимо
  • Вес ( г )
    3035.00
  • длина
    960.00
  • ширина:
    290.00
  • Высота:
    290.00
Community
Discussions
Rate&
Review

Напишите ваш собственный отзыв

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
Came very well wraped, go's together fast for a kit, foam is first class but had a couple of blisters in the paint, used epoxy to glue it but be warned sand the paint before glueing, decals are nice and are on three sheets good manual with C of G. The wing is glued on so if you wont to fit retracks do it before fixing the wing though ply plates are pre fitted and servoless retracks would be easy to fit at any time. waiting for weather to maiden her it really likes the part.

I hope she flys as good as she looks
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Its a realy nice model. I changed the engine and esc with a rclander 68mm, 1.7 kg thrust and 80 amp esc. I modified it with flaps and dsr b retracts. Had to do some cutting to make it fit but it was worth it. I also put on the turnigy rc led lightning system. I use a 4 cell 4500 mah battery and a separate receiver battery. (2 cell 850 mah. life battery, 48 gram). Tot weight is 1.750 kg and flying time with different power setting is 12min.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Not a bad foamy EDF, it has a nice shiny painted finish with minimal moulding dots and lines, it can be seen that these have been avoided where possible and it looks neat. Its not smooth smooth, but its not bad for a painted foam finish.

Instructions are OK, limited though, and show assembly steps which on my model have already been completed. This did not save time at all as the assembly was pretty shoddy, parts did not fit, control surfaces were not aligned and there was a significant amount of excess glue in the hinges preventing movement. After a couple hours trimming with the dremel, I have managed to get it to work. Also note that the "perfect fit" DSRB retracts are no where near a perfect fit, and require cutting and gluing in blocks for the retracts.

I will be running 2x 3S 2150 batteries which need to be jammed all the way in the nose (past the battery tray) to get it to balance. EDF does run smooth on mine though, and will produce around 0.8-0.9:1 thrust with the retracts, and top 1-1.1:1 without the retracts.

Overall, a great looking model, great finish on the foam with sharp trailing edges on the wing (looks great). Might paint the surfaces a bit to help distinguish top and bottom.

Would I buy it again? so far I'm pretty impressed by the foam model, but let down by the poor assembly. With some work that I'm prepared to put in, at this price point, I think I
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
The model is ok but the retracts that are supposed to be an exact fit do no fit without triming wood at mounts and also nos has to modified to accept nose wheel electric retract. this was the TGY-DSRB retracts.

As for weight and balance try putting fiberglass in the nose to strengthen it and the balance will be fine. This has to be done before glueing it on. Tha plane is slower with the electric retracts and a better motor would be good.

Charles
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Finally got it balanced. After a burnt out motor and splitting it in half twice. The alloy EDF needs a 4000mah batt up front to get the CG forward enough. Flys steady and has huge presence in the air. Sounds a million bucks and fan is smooooooth. Not really for beginners and even then I'd only take it out for special occasions. Enjoy.
verified_user Quality
trending_up Value
playlist_add_check Overall
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Combine

essential items and
battery
acc

Метки товара

Используйте пробелы для отделения меток. Используйте одинарные кавычки (') для фраз.