Зарегистрируйтесь

Product Finder

Настройки

Useful links

 
[["US","AU","GB","DE"]]
Зарегистрируйтесь
Shipped From:
  • USA

Firstar 1600 EPO / Пластиковые 1600мм (ПНФ)

Firstar 1600 EPO / Пластиковые 1600мм (ПНФ)

QTY:

Now save сэкономь 0,00 руб. 0,00 руб.

6 899,03 руб.
Stock:
Вес:
3184 g
Артикул:
043000018-0

Suggestion Box

Please let us know if you found any issues with this product listing.
We take our customer comments very seriously and in many cases our website modifications and product updates are a result of your comments!

Война цен

If you've seen a product elsewhere for a better price, please let us know! HobbyKing pride themselves on offering the best price, so if there if you see something cheaper elsewhere, let us know!

Combine

essential items and
battery
Описание
товара

Firstar 1600EX является привлекательным и великолепно оформленный FPV платформа с аа множеством полезных функций , которые делают эту модель одной из лучших в своем классе.

Для прочности и надежности, модель имеет раздувом фюзеляж , который использует нейлон и практически Indestructable, летающие поверхности все сделаны из жесткой пены EPO. С точки зрения практичности, крылья плагин и модель не требует клея для сборки. Все просто винты вместе. Внешний купол чисто для взглядов и используется , когда Firstar 1600EX втекает в качестве планера, хотя unclips за считанные секунды , чтобы показать готовую платформу камеры, в комплекте с монтажным отверстием панорамирования / наклона сервоприводом , который был предварительно формованной. Эта большая камера платформы / крыло крышка крепится с помощью защелки быстрого высвобождения и после удаления, открывает огромные площади навес для крепления батареи и FPV оборудование на предварительно установлены фанерной плиты. Все сервоприводы, моторные и ESC, конечно , предварительно установлена.

Две части крыла имеет молдинги для добавления закрылки при желании плюс формованные C показателей G на нижней стороне для быстрой проверки перед полетом. Существует никаких сомнений в том, что это великолепно оформленный, высокое качество модели FPV по отличной цене. Было бы справедливо сказать , что она является более привлекательным , чтобы смотреть на чем большинство FPV платформ, не говоря уже о гораздо жестче, то Firstar 1600EX даст RC Pilot часы удовольствия в течение многих лет!

Особенности:
• Подключи и лети - Просто добавьте ваш выбор батареи, передатчик и приемник
• Литой крылья ЕРО и раздувом пластиковой фюзеляж
• Просторная передняя часть фюзеляжа отсека
• Навес / люк имеет плоское основание для установки камеры FPV
• Стабильная производительность полета
• Дополнительные клапаны
• Плоский монтаж кормовой платформы крыла для монтажа антенны FPV

Технические характеристики:
Размах: 1600мм
Длина: 1044mm
Полетный вес: 950г
Двигатель: 2812 1400KV бесщеточный
ESC: 30A ESC
Сервопривод: 4 х 9g

Необходимые:
4 ~ 5 передатчик и приемник CH
аккумулятор 3S 11.1V 1800 ~ 2200mAh LiPoly

Product
Specifications

Дополнительная информация

  • Артикул:
    043000018-0
  • Brand:
    Нет
  • Вес ( г )
    3184.00
  • длина
    1050.00
  • ширина:
    170.00
  • Высота:
    240.00
Community
Discussions
Rate&
Review

Напишите ваш собственный отзыв

Only registered users can write reviews. Please, sign in or sign up

Quality
Value
Overall
love this place. solid construction and decent glide capabilities, haven't had it long but so far it's outstanding i did swap out the motor and speedy as well as aileron servo's and elevator servo. and used them for flaps while using mg servo's all round, only because of the distance i want to do with this i dont want any failures.

all in all on the build i'd tell everyone to go buy one.!!!

love it!!!
Quality
Value
Overall
Quality
Value
Overall
The electronics are crap so I replaced the lot.
The plane itself isnt too bad but and its a big but...
The motor mount and pod are awful.
They are both soft and brittle.
I have ordered the V2 mount from Hobbyking in the hope that I will at last have a good fpv platform.
In the end this has cost me nearly double the buying price to get it working well.
Quality
Value
Overall
Quality
Value
Overall
The FPV raptor 1.6 is the best fpv plane i have had. Its rugged and has loads of carrying capacity. Just replace the electronics. They really need to supply a kit version.
Quality
Value
Overall
Quality
Value
Overall
This is great aircraft. The only thing that lets this aircraft down are the wing bolts, it would be more convenient if it had some type to thumb screws or quick release system.

Has good pay load capacity, and EPO foam is good quality.

Packaging could be better to protect the aircraft, mine had damaged on vertical stabiliser, but nothing a quick soaking in boiling water couldnt straighten out.

Quality
Value
Overall
Quality
Value
Overall
The decals I received where like 100 years old, all curled up and they dont stick. Hinges also need some reinforcement but those minor complaints aside, quality wise it seems fine, and a fairly easy build. There is LOTS of room in the fuselage, I shouldnt have problems mounting a flight controller, GPS, OSD, and amp sensor.

I flew the maiden with a 2200mAH battery and no fpv gear besides a mobius in the cockpit. Its borderline tail heavy even in that configuration, pitch stability was bad, didnt fly nicely. Forget about even smaller batteries, with a 2700 and 3300 it balances out and becomes a much nicer plane to fly, however, it also becomes even more underpowered than it was. Its OK for FPV and learning how to fly, but the power just isnt there to get you out of trouble, and even doing a looping from level flight is nearly impossible without diving for speed first.

Lack of power makes take off also a bit of a challenge, it needs a healty throw. Although I did manage to take off from the snow with no problems. Maybe it will work on (wet) grass too.

Power aside, flight characteristics are very good. Glide angle is excellent and I suspect flight times will be impressive (didnt time my flights, and it was freezing cold, but I suspect 20 minutes will be a given). She is pretty forgiving when stalled (if cg is correct), rolls nicely, doesnt 'auto level' like a bixler, but i
Quality
Value
Overall
Quality
Value
Overall
<a href='http://www.hobbyking.com/hobbycity/store/uploads/684449117X991778X39.JPG' target=_blank>Igor</a>

'''
http://youtu.be/Jksawf6IYuc
Quality
Value
Overall
Quality
Value
Overall
Purchased for my first FPV flying experience and flew well but felt a little under powered. Replaced all my servos for metal geared and fitted 40A ESC and a NTM 28mm 1400kv motor......perfect.
I went a step further and swapped out the wings for 2m Phoenix 2000 wings with minor alterations. Maidened it today and what a great plane for FPV gliding about was perfect. Needs a fair bit of weight in the nose and 2 x 2200mAh 3S batteries are perfect. As it doesn't use much power flight times are great too. HIGHLY RECOMMENDED.....
Quality
Value
Overall
Quality
Value
Overall
May be a little under powered but this plane can take a beating. Went into a nose dive close to the ground and hit with a load bang. Picked it up and brushed off the dirt to find a little gouge in the nose. I replaced the battery and check the flight controls and I was flying in 5 mins.
Quality
Value
Overall
Quality
Value
Overall
I can't really recommend this one because it requires so much upgrading to make it good. Mine arrived with 2 dead servos so I replaced most of them. The body is hard plastic, which is nice, but it's also heavy meaning that if you're going to put in a big battery and FPV gear then you also need to upgrade the motor. With stock motor it's ok but slightly underpowered and definitely will NOT take off from the ground as advertised, even with a 2200 in there. I ended up upgrading the motor to a Rimfire .10, which now allows it to take off from the ground and gain altitude reasonably quickly. Of course this also required a new ESC. You can see where this is going... It's now a much more expensive model.
Quality
Value
Overall
Quality
Value
Overall
Received it the other day double boxed which was good as outer box damaged,Hole in the side inner box was all good, on open the box wings wrapped in bubble wrap no damage, fuselage is bigger than expected blow moulded plastic as is the Phoenix. All bits and pieces are as they should be seems as though there are lots of spare screws 2 spare clevises and there was safety clevises rubber bands. Motor pod fits well and 4 screws to secure and is as described and esc, rudder and elevator fit in plastic clamp which clamps through tail section 2 screws for elevator and 2 screws for rudder all fit good, now for the bonus if you have a Phoenix the wing are exactly the same so the 2 meter wings fit and if you have the 2000 Phoenix you know have the 1600 Phoenix as these wings fit. All in all happy with purchase and HK service. Maiden flight to follow.
Quality
Value
Overall
View all reviews
Upload
Videos
  • Firstar EX Glider

Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Combine

essential items and
battery

Метки товара

Используйте пробелы для отделения меток. Используйте одинарные кавычки (') для фраз.