FMS (RTR) 1:24 FCX24 Mercedes-Benz Unimog 421 (Green) 4WD Rock Crawler w/2-Speed Transmission, Tx, LiPo & Charger

1:24 scale Rock Crawlers have become very popular over the last few years, FMS has become part of this fast-growing side of the RC hobby with this officially licensed FCX24 Mercedes-Benz Unimog 421. FMS is one of the most experienced RC manufacturers today, and this replica's attention to detail is second to none. In the late stages of WW11, Germany was required to divest its military industry, so the German engineers decided to turn their focus on designing agricultural machinery. Daimler-Benz designed a machine with full-time 4WD, equipped with differential locks, portal axles, and the ability to power external devices, the Unimog 421 was born. This FMS model perfectly captures the essence of the full-scale Unimog design, its realism is beyond expectations with accurate details including the grille with the iconic M-B badge, opening hood, rearview mirrors, snorkel, windscreen wipers, and mudguards.

The FCX24 chassis is a high-performance, high-strength integrated nylon molding, with the trapezoidal beam joined by metal side beams to provide a durable and rigid platform. The included multi-link suspension with coil springs and hydraulic shock absorbers allows for maximum axle articulation over rough terrain to maintain traction. The power from the two-speed high-torque transmission is transmitted to the front and rear axles through metal universal drive shafts, and the axles are equipped with a simple gearbox built into each hub (commonly known as a "Portal Axle") which increases the ground clearance and reduces the load on the differential. The Unimog also includes a 2-speed gearbox that is operated by the transmitter via an on-board servo. The low gear of 99:1 gives the Unimog a strong output torque for extreme climbing, and the 24.75:1 ratio gives the Unimog an impressive top speed of up to 8km/h.

The FCX24 Unimog 421 has an easy-to-remove rigid, injection-molded polystyrene bodyshell, this means it has highly accurate scale detail, plus it is tough and very durable. The Unimog also boasts a scale fully functioning light system including headlights, turn indicators, and roof lights for even more added realism.

The 1:24 scale FMS FCX24 Mercedes-Benz Unimog 421 4WD arrives ready to run, it is fully assembled and is complete with a full set of powerful, factory-installed water-resistant electronics. These include a high-torque brushed 130 motor, 2-in-1 receiver/ESC, independent chassis-mounted metal-geared steering servo, and a 7.4V (2S) 380mAh LiPo battery for up to 30 minutes of run time. To get started, you only need to charge the LiPo with the supplied USB charger, install 4 x “AAA” batteries into the included G3 V1 3ch 2.4GHz transmitter, and you are ready to unleash your adventurous spirit.

Features:
• Ready to run with motor, 2-in-1 Rx/ESC, steering servo, G3 3ch Tx, LiPo battery, and USB charger
• "Portal Axles" increase ground clearance and reduce the load on the differential
• High-strength nylon crawler chassis and two-speed transmission
• Easily removed highly detailed, painted polystyrene bodyshell
• Scale, functioning light system
• Multi-link suspension and oil-filled shocks allow for maximum axle articulation and all-wheel traction
• Drive train includes ball races for durability and reduced friction loss

Specs:
Type: FMS FCX24 Mercedes-Benz Unimog 421 4WD Rock Crawler
Scale: 1:24
Build Stage: Ready to run
Body: Injection-molded painted scale bodyshell
Drivetrain: 4WD
Drive Type: Forward/Brake/Reverse
Motor: 130 brushed
Rx/ESC: Combined 2-in-1 unit
Steering Servo: Metal-geared digital
Shock Absorbers: Tuned coil oil-filled shocks
Suspension: Multi-link
Transmission: 2-speed
Tires: M/T high-grip soft all-terrain
Length: 249mm (9.8")
Width: 153mm (6.02")
Height: 160mm (6.3")
Ground Clearance: 40mm (1.57")
Weight: 400g (14.2oz) excluding battery
Battery: 7.4V (2S) 380mAh LiPo
Charger: USB
Body Color: Green

Includes:
1 x FMS (RTR) 1:24 FCX24 Mercedes-Benz Unimog 421 4WD Rock Crawler (Green)
1 x G3 V1 3ch 2.4GHz Transmitter
1 x Receiver/ESC 2-in-1 unit
1 x 130 brushed motor
1 x 7.4V (2S) 380mAh LiPo battery
1 x USB charger
1 x Hex socket wrench
1 x Instruction manual

Requires:
4 x "AAA" batteries for the Tx
Plenty of open space and rough terrain

Please note: A copy of the instruction manual is available under the "Manual/Files" tab.