New Items Новости ФОРУМ
Зарегистрируйтесь

Итоговая цена

0,00 руб.

Cart 0 Cart 0 Loading...

Фокке Вульф FW-190A Бало 0,46 размер GP / EP 1500mm (ARF)

Фокке Вульф FW-190A Бало 0,46 размер GP / EP 1500mm (ARF)

Discontinued Product

Please continue searching for a similar product.
SKU:
341000071-0
WANT FREE SHIPPING? Click here to find out more!

Было бы справедливо сказать, что Фокке Вульф FW-190 пришли в шок пилотов союзников, когда введена в эксплуатацию в августе 1941 года; на самом деле, британский ас Бадер написал столько, сколько в своей книге «Борьба за небо."

Тяжеловооруженных с 4 х 20 мм пушками и 2 х 13 мм пулеметов, то "Butcher Bird", как FW-190A было известно, поставил массивный удар тем, попадающие в его достопримечательностей и превзошел Spitfire Vb (главный британский истребитель в то время ) во всех областях, за исключением радиуса поворота на высотах ниже 20000 футов.

С максимальной скоростью 408 миль в час из на 19,400ft и скоростью подъема почти 3,000ft / мин FW-190A сохранял свое превосходство над союзными бойцами до введения Spitfire Mk IX с его более мощным Merlin 61 двигателем и 2 ступени нагнетателя восстановил равновесие в летом 1942 года.
FW-190 увидел действий на Восточном фронте с конца 1942 года, где он снискал своих пилотов, которые использовали его в обоих истребителей и штурмовиков ролями.

Наш "Butcher Bird" приходит почти готов к полету только с окончательной сборкой и установкой оборудования требуется. Все бальзы планера достаточно сильна, чтобы взять нитро двигатель, но достаточно легок для электрического преобразования. Прочный фиксированный хвост Dragger шасси отлично подходит для более грубых травяных полях, хотя это простая работа, чтобы добавить набор втягивается. Эта модель поставляется с очень полной аппаратной упаковке, включая толкателей, рога управления, топливный бак, крепление двигателя, и даже пластиковый блесны.

Чтобы добавить к шкале реализма, покрытие является многоцветной пластиковой пленки, полу матовый с печатной линии панели, заклепок детали и даже реалистичных атмосферных эффектов, применяемых! Просторная, окрашенного стекловолокна капот поставляется, чтобы закончить этот большой вид спорта / модель масштаба и большой, но хорошо замаскированный люк для доступа позволяет быстро изменять батареи в период между вылазками.

Полет FW-190 доставляет удовольствие благодаря своему легкому нагрузки на крыло и рафинированного секции крыла, которая была разработана, чтобы дать более слабые характеристики сваливания, что часто встречается со шкалой Warbirds и сделать его простую работу, чтобы бросить в наборе втягивается, чтобы очистить его для некоторого адреналина низко и быстро стрейфом бежит, подтягивание в победу рулон в конце поля.

Особенности:
• Почти готов к полету - Полная окончательная сборка, установка на ваш выбор электроники и системы питания
• Легкий бальзы и фанеры строительство
• Включает в себя Неубирающимся, убирается готов
• Очень подробно печататься многоцветные покрытия
• Магнитный люк для топливного бака или получения доступа к батарее
• Предварительно окрашенные стекловолокна обтекателя
• Полный пакет включает в себя аппаратное обеспечение вертушку

Технические характеристики:
Размах: 1500мм
Длина: 1090mm
Полетный вес: 2700g

Требуется:
4/5 канальный передатчик и приемник
0,46 Двухтактный / 0,70 четырехтактный двигатель или 0,46 Equiv
5 х Стандартные серво
Приемник батареи (свечение)
800W двигатель / ESC / аккумулятор (электрический)
Электрические втягивается

  • Артикул 341000071-0
  • Brand Other
  • вес 6196.0000
  • длина 1020.00
  • Packaging Width 205.00
  • Высота 415.00
  • IC / 2 : Елец -
  • Motorsize ( диам - или - сс) -
  • Размах (мм ) 1500.00
  • Length(mm) -
  • SaleWeight ( г ) -
  • Емкость ( мАч ) -
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

I have had this kit (although its an ARF it needs quite a bit of work before it can fly) for a few weeks and am well into the setup. Initial impressions are really good - very well and strongly made (if a bit heavy) with printed plastic covering. The pilot and cockpit are excellent. It comes with a comprehensive set of a accessories - all the pushrods, hinges, servo mounts etc. I am doing mine electric and I reckon all up weight will be about 2.7kg (I weighed all the components). It took a while to get retracts that will fit but have eventually settled on electric retracts with a socket for 5mm pins and have cut down the supplied fixed u/c legs and put a tube sleeve around the end that fits in the retract as the wire is 4mm diameter. I also hope to install a hobby king sound system in this plane. The battery bay is big enough for a 5s 3000mAh battery but not my 5000mAh ones so I hope flight duration will not be a problem. I will add to this review once it flies.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I have had this kit (although its an ARF it needs quite a bit of work before it can fly) for a few weeks and am well into the setup. Initial impressions are really good - very well and strongly made (if a bit heavy) with printed plastic covering. The pilot and cockpit are excellent. It comes with a comprehensive set of a accessories - all the pushrods, hinges, servo mounts etc. I am doing mine electric and I reckon all up weight will be about 2.7kg (I weighed all the components). It took a while to get retracts that will fit but have eventually settled on electric retracts with a socket for 5mm pins and have cut down the supplied fixed u/c legs and put a tube sleeve around the end that fits in the retract as the wire is 4mm diameter. I also hope to install a hobby king sound system in this plane. The battery bay is big enough for a 5s 3000mAh battery but not my 5000mAh ones so I hope flight duration will not be a problem. I will add to this review once it flies.

I am starting this thread because I just received my FW-190.
Good packaging arrived in one piece.
Model is covered in some plastic covering (I think its called KH Misticker). Mat finish and beautifully detailed.
I am planning to put EVO10 gas on this model. I used EVO10 engine on WorldModels FW190 and it works perfectly.

Over the course of several weeks I will continue to post pics and finally video...stay tuned

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I am starting this thread because I just received my FW-190.
Good packaging arrived in one piece.
Model is covered in some plastic covering (I think its called KH Misticker). Mat finish and beautifully detailed.
I am planning to put EVO10 gas on this model. I used EVO10 engine on WorldModels FW190 and it works perfectly.

Over the course of several weeks I will continue to post pics and finally video...stay tuned

OK ... kit arrived in very good condition ... double boxed. Its the VQ FW kit.
All goes together well ... BUT - the firewall marks are difficult to find, and motor mount once fitted as per instructions - shaft end is out of centre. The mount needs to be moved a small amount more to left so that right thrust angle puts shaft end at centre.
Cowl does not slide over fuselage end and only butts up to it.
Fixed wheel blocks are laminated from multiple ply sheets and these split apart when landing or any shock. The L of the landing gear then impacts wing top sheeting.
The wing is non-scale as most of the aircraft but overall it looks the part in the air. The photo of her gives impression of a semi gloss finish but in fact she is much better looking in reality.
The covering film is not like normal film - it is more self-adhesive and thicker. They give you A4 sheets of each colour as spare repair film if needed.

I have fitted an OS 70FL 4str and this powers the model excellently, along with 12x6 prop. Balance is spot on with this.
I am now awaiting the retracts to replace the fixed gear. I chose the plain retract units shown in accs. links and will use the fixed gear in them with top L cut of.

For anyone who wants a FW190 and not too worried about scale accuracy - this is a good model.

See my youtube channel 'solentlifeuk' for video.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

OK ... kit arrived in very good condition ... double boxed. Its the VQ FW kit.
All goes together well ... BUT - the firewall marks are difficult to find, and motor mount once fitted as per instructions - shaft end is out of centre. The mount needs to be moved a small amount more to left so that right thrust angle puts shaft end at centre.
Cowl does not slide over fuselage end and only butts up to it.
Fixed wheel blocks are laminated from multiple ply sheets and these split apart when landing or any shock. The L of the landing gear then impacts wing top sheeting.
The wing is non-scale as most of the aircraft but overall it looks the part in the air. The photo of her gives impression of a semi gloss finish but in fact she is much better looking in reality.
The covering film is not like normal film - it is more self-adhesive and thicker. They give you A4 sheets of each colour as spare repair film if needed.

I have fitted an OS 70FL 4str and this powers the model excellently, along with 12x6 prop. Balance is spot on with this.
I am now awaiting the retracts to replace the fixed gear. I chose the plain retract units shown in accs. links and will use the fixed gear in them with top L cut of.

For anyone who wants a FW190 and not too worried about scale accuracy - this is a good model.

See my youtube channel 'solentlifeuk' for video.

I ordered one, the aircraft is well done and i like the colors and the age effect on the wing skin. The push pull rods are metallic so too havy for my point of view. I think i will replace them with a plastic cable to save same weith.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I ordered one, the aircraft is well done and i like the colors and the age effect on the wing skin. The push pull rods are metallic so too havy for my point of view. I think i will replace them with a plastic cable to save same weith.

My FW-190 came well packed & protected. Weight of all parts in the box totals 2.270g. The hardware pack and push roads alone put 760g on the scale. It might be possible to save some weight here later while putting the model together.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

My FW-190 came well packed & protected. Weight of all parts in the box totals 2.270g. The hardware pack and push roads alone put 760g on the scale. It might be possible to save some weight here later while putting the model together.

Very nice all wood constructing even fuselage is round like the original. Plane is stand off scale, but one of the best flying FW-190's I have ever owned. Flying with a 4250-750 brushless motor 14x7 APC e prop and 5000 4 cell Hobby King Zippy pack lipo. 9 minute flights depending on throttle management. Installed retracts had to modified the battery opening a little for the larger pack. Same VQ model FW-190 from a few years back see Model Airplane new reviews. http://www.modelairplanenews.com/blog/2012/12/12/vq-models-focke-wulf-fw-190-video/

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Very nice all wood constructing even fuselage is round like the original. Plane is stand off scale, but one of the best flying FW-190's I have ever owned. Flying with a 4250-750 brushless motor 14x7 APC e prop and 5000 4 cell Hobby King Zippy pack lipo. 9 minute flights depending on throttle management. Installed retracts had to modified the battery opening a little for the larger pack. Same VQ model FW-190 from a few years back see Model Airplane new reviews. http://www.modelairplanenews.com/blog/2012/12/12/vq-models-focke-wulf-fw-190-video/

Just received the plane and it is a great looking bird with many nice details. Much better looking than shown on the pictures here, Fantastic value for the money, even when you add the shipping cost. It is a VQ model and has a very good manual. All parts like motor mount are top quality. I bought the servoless retracts with shock absorbing oleo legs - fits very well. Came with 4 guns but only one is needed to fit on top of cowling - not shown on the pictures here. I am sure it will fly very well - only pity it does not have flaps

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Just received the plane and it is a great looking bird with many nice details. Much better looking than shown on the pictures here, Fantastic value for the money, even when you add the shipping cost. It is a VQ model and has a very good manual. All parts like motor mount are top quality. I bought the servoless retracts with shock absorbing oleo legs - fits very well. Came with 4 guns but only one is needed to fit on top of cowling - not shown on the pictures here. I am sure it will fly very well - only pity it does not have flaps

Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Related Tags

Combine Essential Items and Save

Radio Control Planes, Drones, Cars, FPV, Quadcopters and more - Hobbyking