Стать поставщиком Блог Новинки
Зарегистрируйтесь

Итоговая цена

0,00 A$

Корзина 0 Корзина 0 Loading...

Раскладной Пропеллер Вт / концентратор 35 мм / 3 мм 6х6 (2 шт)

Generating Links

Раскладной Пропеллер Вт / концентратор 35 мм / 3 мм 6х6 (2 шт)

Цена:

Now save сохранить 0,00 A$ 0,00 A$

11,75 A$
Отправлено из:
  • Global
Уже купили
Примерное время доставки: Нет предполагаемого времени прибытия [ ? ]
Статус:
Нет в наличии!
Артикул:
OR025-02401B
Хотите бесплатную доставку? кликните сюда Узнать больше!

Хорошо законченный 6x6 складной пропеллер м ADE из углеродного пластика , армированного.

3 ~ адаптер опоры вала 3.17mm

  • Диаметр X (дюймы ) 6.00
  • Шаг Y (дюймы ) 4.00
  • вращение CCW
attributeset-13
Close

Dimension Diagram Guide

  • attributeset-13

Close

Загрузить видео

Для загрузки видео необходима регистрация войти в систему или Зарегистрируйтесь

Темы
Сортировать по
Самые последние темы
* Псевдоним пользователя:

* Ваш ответ:


Пожалуйста, введите текст, показанный на картинке, в поле ниже
*Код верификации:
Отменить
Отправить
Опубликовать новую тему
* Псевдоним пользователя:

* Ваша тема:



Пожалуйста, введите текст, показанный на картинке, в поле ниже
*Код верификации:
Опубликовать тему

Для того, чтобы оставлять отзывы, необходимо зарегистрироваться войти в систему или Зарегистрируйтесь

| Проверенный покупатель

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Jul 19, 2016

Excelente para modelos minitermicos motorizados electricamente

Chris | Проверенный покупатель

  • Overall
  • Quality
  • Value

Customer Rated

Mar 07, 2014

These seem to be decent quality, but one of the two I received had a horrible vibration to it. Upon closer inspection I noticed the hole in the nut that fastens down the yoke was way off center, causing the entire assembly to vibrate. The nut on the 2nd spinner was better, but still off center and caused vibration. There's no way I'll attempt to use this spinner without going to the hardware store and finding a better nut.

Aloy | Проверенный покупатель

  • Overall
  • Quality
  • Value

Customer Rated

Jul 07, 2013

When i first flew 7" prop on my glider with this I thought something was wrong with the motor, had to give 75pcntpower or more. when I put on a 7" APC prop it had twice the power and can cruise less than half throttle. one thing i notice is the spinner hub takes up 1- 1/4" inches so its not a 7" prop but a 5-3/4" I think I will always add more than an inch to my next order to compensate.

Bakerman | Проверенный покупатель

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Apr 15, 2013

well built and needs a Little balance!

The Tellurian | Проверенный покупатель

  • Overall
  • Quality
  • Value

Customer Rated

Dec 09, 2012

I have 6*3, 6*4, and 6*6 and can't tell the difference between them by sight or by measurement. They all have the same pitch despite the stamped numbers and draw the same current. Very inefficiently at that too, took an 8*4 APC to match amp draw and the APC had way more thrust obviously. If you don't mind that they are ok.

Richard

mcweck | Проверенный покупатель

  • Overall
  • Quality
  • Value

Customer Rated

Jun 06, 2012

I use them on my AXN Floater-Jet with standard motor. Much better climb rate but less speed.
They came very well balanced.

| Проверенный покупатель

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Apr 15, 2012

very well made, balanced

Загрузить файл

Зарегистрируйтесь, чтобы загружать файлы.
пожалуйста войти в систему или Зарегистрируйтесь Начните помогать коллегам по хобби!