Зарегистрируйтесь

Product Finder

Настройки

Useful links

Живой чат
 
[["US","AU","GB","DE"]]
Зарегистрируйтесь

Fox EPO Glider 2320mm (ПНФ)

Fox EPO Glider 2320mm (ПНФ)

Discontinued Product

Please continue searching for a similar product.
Stock:
OUT OF STOCK
Вес:
2902 g
Артикул:
FOXGLIDER
Описание
товара
Новый Fox EPO является столь же большим , как это красиво!
Вы сразу заметите, большой размер салона для огромного разнообразия батарей, радио передач и, возможно, системы FPV. Изготовленные из ЭПО пены и в том числе 2 стержнями углеволокно (вставленных во время пресс-формы) и столяра сплава только на одном только главном крыле, это 2.32m размах крыльев модель является жестким в полете и прощая в авариях. Умело разработан с простотой в виду, Fox планер включает в себя такие функции, как замок с защелкой купола, внутренняя система рога, обеспечивающие нулевое сопротивление и аккуратнее внешний вид, а также тщательно разработанные для производства пенопласта плесень сохраняет кожу самолета гладкой и в основном свободный от уродливой пара пистолет пятна, найденные на других моделях. Строительство лиса 15 минут процесс, который требует только драйвер крестообразная головки винта. Просто винт в хвостовой части, подключите Rx, подключите батарею, и вы готовы!

Спецификация;
Размах крыла: 2320mm
Длина: 1290mm
Полетный вес: 1150g
Система питания: 750 кВ Бесщеточная
ESC: 30A (с тормозом)
Радио: 4 канала, 4 сервоприводы.

В комплекте;
Фокс планер
Все сервоприводы предварительно установлены
Мотор предустановлена
ESC Предустановленное
Никакого дополнительного изготовления или строительства не требуется.

Необходимые;
Приемник / передатчик 4Ch
2200mAh 3S LiPoly. (Большие батареи будут работать, но может повлиять на CG)

Заметка;

Это большая модель, а не такой же, как версии ST Модель продано elswhere. Это гораздо больше.
* V2 версии улучшены функции местоположения элероны сервоприводов.
Product
Specifications

Дополнительная информация

  • Артикул:
    FOXGLIDER
  • Brand:
    Не применимо
  • Вес ( г )
    2902.00
  • длина
    1340.00
  • ширина:
    190.00
  • Высота:
    341.00
Community
Discussions
Rate&
Review

Напишите ваш собственный отзыв

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
It flys like a dream for an epo glider.
Motor is normal for soft wind.
change the elevator servo with a metal.
C of G not 4cm byt 6 cm or lighter bat.
first flight without trims.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Easy plane to fly! It can fly really slow so landing isnt a problem. I crashed mine today (sort of) and it was still fully intact, so its a tough plane.

I think the elevator can use a bit more travel. I use the ailerons as full capacity. The rudder is pretty big and thus very effective.

I flew it today in 10-15 kts wind, in this wind its lands nearly vertical.

So conclusion: Good sturdy plane, easy to fly.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I have found this to be an excellent flying glider despite a few issues that some have mentioned. The foam hinges do not last more than 4-5 f;lights before breaking off, the aircraft is slightly under powered, and it really should be factory equipped with flaps. It loves ot fly, but hates to come back down with just flaperons. I nylon pin hinged all surfaces, made balsa ailerons and flaps, econokoted the entire aircraft for strength, and bolted the wings through the canopy. The large wings tend to slip on the spar during flight and especially on landing and need a better way to secure them from slipping. Finally, I made servo protectors for the ailerons servo's as they tend to hit the ground occasionally on landing and snap servo gears. Overall, this plane is an great flyer at a great price and certainly draws attention at the field. Especially when lit rolls by on landing and keeps going.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Maidened it last weekend, had in total 4 flights. Very very nice plane, I flew it with a 3S 2200 mAh. Descents quite quickly for a glider (should go with a lighter battery I guess) but is a very fine plane to fly powered. Very relaxing. A joy to land too :-)

I removed all the stock clevis, horns etc from the kit as they are poor quality. Replaced it by decent hardware though.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Habe mit den Fox fr zwischendurch hinter dem Haus zum fliegen geholt. Ist wohl mein 12 oder 14 Segler. Das meiste VollGFK/CFK. Ich bin berrascht, wie gut der FOX gleitet, nicht bermassig langsam, aber sehr guter gleitwinkel. Der Motor reicht fr 45 Grad steigen und Regler arbeitet klaglos mit SBEC. Betreibe ihn mit 2200mA/20C/3S Turnigy. Damit stimmt auch der Schwerpunkt. Knnte noch etwas weiter hinten sein, aber der Akku ist am ANschlag. Flugbild ist wirklich toll und man sieht in aufgrund des grossen Rumpfes gut. Nach Abschwung um 50 mtr fehlen hinterher 25 mtr, aber naja bei dem Preis. Die flchen sindzum normalen fliegen ausreichend steif und die Oberflche sehr gut. Meine nderungen: Alle Ruder abgetrennt und mit faserverstrktem Klebeband neu gemacht, da zu schwergngig. Flchen vom Rumpf bis zur Hlfte oben und unten diagonal mit Fasertape im Abstand von 20cm getapted, da nicht verwindungssteif genug. Und habe mir noch Flaps eingebaut, um mit Krhenstellung landen zu knnen. Ansonstem das originalmaterial verwendet.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
hi i got this glider from hk a few weeks ago. great glider for the price and flies very well. i have fitted 2 wooden dowels through the fuselage into the wing roots for added security. like the secure canopy fixing.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Calidad. Precio
Muy buena, es muy noble en vuelo
Los aterrizas es los quiere con velocidad porque si no se cuelga y cae bastante rpido.
Materiales decentes.
El motor es justo para volar.
Y hacer algunas trepadas.
Por lo dems me gusto muchsimo su diseo y vuelo.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Excellent glider! Build was complete in under 1.5 hours and centre of gravity was perfect with a 2200 3S in the battery space. Flew very well during first flight with only minor trimming required, has plenty of power on 3S for 35-45 degree climb
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
(Continued) cg of 40mm. The Fox flies well and looks great in the air. Quite frankly at this price what's not to like!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Received my Fox in August 2013. It has the tail mounted servo for the rudder and blue pilot with the cap, so not the version currently pictured on the product page. HobbyKing should do themselves a favour and update the product page images as the latest version is much better than the one pictured on the product page.
Mine had no shipping damage and I had no issues with the motor mount reported in some reviews.
I cut out all control surfaces and hinged them as even working them back and forward for a couple of hours didn't free them up enough and this would stress the servos. I also cut in flaps so that I could setup crow for landing and full span ailerons for increased manoeuvrability. At the moment I haven't set this up but have found that flaps on their own slow the Fox down well for landing.
I also changed the servos to HobbyKing 939MG's as I had some lying around and some owners have reported servo blowback during high speed aerobatics. I also added a 40A Plush ESC, again because I had a spare one.
The only assembly issue I had was that I found it hard to get the two horizontal stabiliser bolts secured as they appeared to be a little too short. Got there in the end though. I'm using 1300mAh Nanotech 45 C batteries and have added 40 grms of lead to the tail to balance her. My cg is now sitting at 63 mm from the leading edge, quite a way back from the recommended c
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
  • Fox EPO Glider 2320mm

Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Метки товара

Используйте пробелы для отделения меток. Используйте одинарные кавычки (') для фраз.