New Items ФОРУМ
Зарегистрируйтесь

Итоговая цена

0,00 руб.

Cart 0 Cart 0 Loading...

FPV 433Mhz Радиотелеметрия комплект 100mW V1.1

FPV 433Mhz Радиотелеметрия комплект 100mW V1.1

Discontinued Product

Please continue searching for a similar product.
Вес:
47 g
SKU:
9387000030-0
WANT FREE SHIPPING? Click here to find out more!

Этот Телеметрия радиоприемник позволяет установить связь с контроллером полета, такие как наш HK Pilot Mega 2,5 или MultiWii AIO через оборудованного устройством USB, таких как компьютер, ноутбук или планшет, поддерживающий соединение USB (OTG). Радиоприемник не только позволяет просматривать данные в реальном времени, такие как живой позиции GPS, обложенных на карте (если контроллер полета имеет возможность GPS) к напряжению системы, заголовок, путевая navagation даже искусственный горизонт, и многое другое, используя на основе с открытым исходным кодом MAVlink станция программного обеспечения заземления. Вы даже можете летать ваш самолет с помощью джойстика через ваш компьютер и обновлять настройки жить! Или просто использовать его для DIY проектов, которые нужен беспроводной последовательный интерфейс. Этот комплект предлагает большой низкая цена, больше диапазон (около одной мили с поставляемых антенн) и высокую производительность. Система использует 433MHz полосу и обеспечивает полный дуплекс связи с использованием модулей HM-TRP HopeRF бежит пользовательские, с открытым исходным кодом, встроенного программного обеспечения.

Встроенное программное обеспечение включает в себя Сик загрузчик, который позволяет обновление прошивки радио через последовательный интерфейс, и настройку параметров системы. Обновление встроенного программного обеспечения и конфигурации полностью поддерживаются в Планировщик APM Mission. Конфигурация также возможна через конфигуратор 3DR радио и AT команд.

Интерфейс к модулю через стандартный 5V толерантных TTL последовательный / FT232 USB Serial.

Особенности:
• Очень маленький размер
• Легкий вес (до 4 грамм без антенны)
• полоса частот 433 МГц
• Чувствительность приемника до -117 дБм
• Передача мощности до 20dBm (100mW)
• Прозрачный последовательный канал
• скорость передачи данных воздуха до 250kbps
• Диапазон около 1 мили с поставляемыми антеннами
• Доказанная диапазон нескольких километров с небольшим многофункциональном антенной
• Может использоваться с двунаправленным усилителем для еще большего диапазона
• кадрирование протокола MAVLink и отчетов о состоянии
• Frequency Hopping Spread Spectrum (FHSS)
• мультиплексирование с временным разделением каналов Adaptive (TDM)
• Поддержка LBT и AFA
• Настраиваемый рабочий цикл
• Встроенный исправлением ошибок (может исправить до 25% битовых ошибок данных)
• микропрограммное обеспечение с открытым исходным кодом
• команды AT для конфигурирования радио
• команды RT для удаленной настройки радио
• Адаптивное управление потоком при использовании с APM
• На основании радиомодуля HopeRF HM-TRP, показывая микроконтроллер SiLabs Si1000 RF.
• Модернизированный более убедить Molex 1,25мм


Технические характеристики:
Полоса частот: 433MHz
Разъемы Антенна: RP-SMA разъем
Выходная мощность: 100 мВт (20dBm), регулируемая между 1-20dBm
Чувствительность: -117dBm чувствительность
Интерфейс: Стандартный TTL UART
Состояние подключения: Светодиодные индикаторы


Включает:
Радиотелеметрия базовая станция (USB-подключение)
Телеметрия трансиверов (Pin заголовка)
ведущий набор x1
Антенна x 2

Этот продукт основан на 3DRadio проекта от 3D Robotics.

  • Артикул 9387000030-0
  • Brand -
  • Емкость ( мАч ) -
  • Вес ( г ) 47.00
  • длина 100.00
  • Width 20.00
  • Высота 40.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

This is a review of the "HK 433MHz Radio Telemetry Kit 100mW V1.1" that I received a couple of weeks ago. The shipment arrived quickly, well packed from the International Warehouse, well done Hobby King! Another nicely done order.

The product looked good, well done PC boards, great looking parts and assembly, and I had ordered the optional cases as well. They looked great also, fit well, and snapped on very snugly - I had to use a use a tool to snap them shut, great fit.

I found a video on You Tube that showed an Australian gent successfully pairing them up, and I followed it and had the same success. My Netbook with Mission Planner software and Quadcopter with HKPilot Mega 2.7 were talking up a storm!

It seemed prudent to check the antennas, having read much pro & con about them. It turns out they were were tuned somewhat low. I used my MFJ 269 for starters, and they were too low to read. The 269 only covers 420 to 470MHz, and they were below that range.

I borrowed a VIA ECHO 1000SF antenna analyzer from a company that I consult for, and the antennas were both resonant at about 380MHz, give or take. At 433MHz, one antenna had an SWR of 9.5:1, and the other was 7.5:1. Time to Tweak!

Using C-clip pliers, I spread the bottom of the "ducky" and lifted it off of the tilt base. That exposed the piece of coax soldered to the spring that is the antenna. That is what is in

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This is a review of the "HK 433MHz Radio Telemetry Kit 100mW V1.1" that I received a couple of weeks ago. The shipment arrived quickly, well packed from the International Warehouse, well done Hobby King! Another nicely done order.

The product looked good, well done PC boards, great looking parts and assembly, and I had ordered the optional cases as well. They looked great also, fit well, and snapped on very snugly - I had to use a use a tool to snap them shut, great fit.

I found a video on You Tube that showed an Australian gent successfully pairing them up, and I followed it and had the same success. My Netbook with Mission Planner software and Quadcopter with HKPilot Mega 2.7 were talking up a storm!

It seemed prudent to check the antennas, having read much pro & con about them. It turns out they were were tuned somewhat low. I used my MFJ 269 for starters, and they were too low to read. The 269 only covers 420 to 470MHz, and they were below that range.

I borrowed a VIA ECHO 1000SF antenna analyzer from a company that I consult for, and the antennas were both resonant at about 380MHz, give or take. At 433MHz, one antenna had an SWR of 9.5:1, and the other was 7.5:1. Time to Tweak!

Using C-clip pliers, I spread the bottom of the "ducky" and lifted it off of the tilt base. That exposed the piece of coax soldered to the spring that is the antenna. That is what is in

Be carefull if you are looking for long range. This item works well but at a maximum of 250 meters with supplied antennas. During gound distance test, the signal drops to zero after 100meters. Perhaps the antennas are not 433 Mhz (they are marked 2.4 Ghz but in discussions somebody says they are not 2.4 but 433, i have a doubt.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Be carefull if you are looking for long range. This item works well but at a maximum of 250 meters with supplied antennas. During gound distance test, the signal drops to zero after 100meters. Perhaps the antennas are not 433 Mhz (they are marked 2.4 Ghz but in discussions somebody says they are not 2.4 but 433, i have a doubt.

Fantastic item, I use it all the time in all places and electronics. Nice n shiny finish, good covering

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Fantastic item, I use it all the time in all places and electronics. Nice n shiny finish, good covering

I'm using these. And they are working fine. Range could be better though. I still need to verify the range of one mile. So far I lost connection before 100meters.
Antenna connectors could be stronger, I accidentally broke the antenna connector of the ground module during transport. (remove the antennas during transport)
Today I would choose the new version because then its easier to update the firmware.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I'm using these. And they are working fine. Range could be better though. I still need to verify the range of one mile. So far I lost connection before 100meters.
Antenna connectors could be stronger, I accidentally broke the antenna connector of the ground module during transport. (remove the antennas during transport)
Today I would choose the new version because then its easier to update the firmware.

Works very well with APM2.5. Just plug and fly. Only minus is that updating the firmware on remote unit could be easier if you could plug the FTDI connector directly to the board.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Works very well with APM2.5. Just plug and fly. Only minus is that updating the firmware on remote unit could be easier if you could plug the FTDI connector directly to the board.

This kit is awesome, i have been using it for some time now. Its stable, its plug and play even in a MAC.

I will take away a star on antenna quality, both of my antennas sounds like something is loose inside. it does work, but a bad thing is a bad thing.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This kit is awesome, i have been using it for some time now. Its stable, its plug and play even in a MAC.

I will take away a star on antenna quality, both of my antennas sounds like something is loose inside. it does work, but a bad thing is a bad thing.

Arrived quickly , but as with so many of these 3dr clones , they came supplied with 2.4Ghz antennas and not the 433Mhz ones ,

I now have to source 433Mhz ones for this kit .

overall a good price despite the shortcomings.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Arrived quickly , but as with so many of these 3dr clones , they came supplied with 2.4Ghz antennas and not the 433Mhz ones ,

I now have to source 433Mhz ones for this kit .

overall a good price despite the shortcomings.

These work very well for me. just plug and play. i have used them with my APM 2.5. works well with my samsung galaxy s3.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

These work very well for me. just plug and play. i have used them with my APM 2.5. works well with my samsung galaxy s3.

?? ???????? ????????? 2.4??? ?? ?????? ????? ????????

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

?? ???????? ????????? 2.4??? ?? ?????? ????? ????????

Very useful Telemetry Kit. I use it with my HK AIO Board (MegaPirateNG). Pefect connection between Smartphone with DroidPlanner 2 and QuadCoptet. Quality is also good. Must buy!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Very useful Telemetry Kit. I use it with my HK AIO Board (MegaPirateNG). Pefect connection between Smartphone with DroidPlanner 2 and QuadCoptet. Quality is also good. Must buy!

  1. 1
  2. 2
  3. 3
Customer files
Telemetry and Osd Download [2681]
Osd and 433Mhz Download [2681]
Telemetry range upgrade Download [268]
Telemetry mount on cabin Download [3524]
Telemetry mount on cabin Download [2802]
No File Name Download [4190]
Telemetry mount on cabin Download [4190]
Original Antenna Spectrum Test Download [5256]
Wiring to arduino (using sensor shield) Download [3106]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save