Зарегистрируйтесь

Product Finder

Настройки

Useful links

 
[["US","AU","GB","DE"]]
Зарегистрируйтесь
Shipped From:
  • Global
  • USA

FPV Гонки Дрон PDB с OSD БЭК для CC3D

FPV Гонки Дрон PDB с OSD БЭК для CC3D

QTY:

Now save сэкономь 0,00 руб. 0,00 руб.

745,84 руб.
Stock:
Вес:
10 g
Артикул:
571000099-0

Suggestion Box

Please let us know if you found any issues with this product listing.
We take our customer comments very seriously and in many cases our website modifications and product updates are a result of your comments!

Война цен

If you've seen a product elsewhere for a better price, please let us know! HobbyKing pride themselves on offering the best price, so if there if you see something cheaper elsewhere, let us know!

Описание
товара

Эта многофункциональная FPV Дрон PDB Для вашего CC3D контроллера полета был разработан, чтобы обеспечить производительность и надежность гонки. Включение четкое, твердое электропитание к вашему выбору ESC-х, а также подачу питания и выход для камер, передатчик светодиодов и т.д.

Питание может подаваться от 2S до 6S батареи LiPoly и поддерживает On Screen Diplays (OSD), чтобы показать вольт, Ампер, таймер & RSSI.

OSD поддерживает MWODS прошивку как Cleanflight, Betaflight & Baseflight.

Это пуленепробиваемый PDB с OSD для ваших FPV Гонки трутней.

Особенности:
• распределения питания + 5V / 12V БЭК + OSD
• Поддержка 2-6S входного напряжения
• 2oz медная фольга, 4 доски слой, чтобы закрепить основание большого тока
• Двойной БЭК, 5V / 12V
• OSD функция, прошивки поддержка KVteam MWOSD, поставляется с FTDI
• Поддерживает OSD функции, такие Basic вольты, AMPS, таймер & RSSI.
• 36 х размер 36мм, такой же, как отверстие установки Naze32, CC3D, SP3

Технические характеристики:
Входное напряжение: 5-24V DC (2-6S LiPoly)
BEC: 5V / 2A и 12V / 2A переключаемый
Максимальное распределение тока: 70A Константа, 100А серийной съемки
Размеры: 36 х 36 х 4 мм
Монтажные отверстия: 30,5 х 30,5 мм M3 (стандарт)

Вес: 7,3 г

Product
Specifications

Дополнительная информация

  • Артикул:
    571000099-0
  • Brand:
    Нет
  • Вес ( г )
    10.00
  • длина
    80.00
  • ширина:
    5.00
  • Высота:
    60.00
Community
Discussions
Rate&
Review

Напишите ваш собственный отзыв

Only registered users can write reviews. Please, sign in or sign up

Quality
Value
Overall
I received the board fairly well packaged and flashed it with the latest MWOSD firmware as per specification. The board was flashed successfully, as well as programmed. Then it worked ok-ish for a couple of times. OK-ish, because the fonts were not displayed properly, but that might be the firmware's fault, not the board's.
Anyway, what seemed stupid, and yes it's a strong statement, but that's just hoew it is, because if you look at the first picture at the left hand side corner of the board, you'll she a tiny tiny component soldered very very close to the mounting hole. When you screw the standoff for the FC chances are you'll knock that component of it's pads. So really not very well thought layout. Other than that could be a fine board.
Quality
Value
Overall
Quality
Value
Overall
This is basically a very good product and an excellent value, but I must give it a low rating because of a build quality issue. The chip that does the OSD video overlay wasn't fully soldered to the board. Most of the chip's pins weren't soldered at all, resulting in a very flaky video signal (which I originally blamed on my video transmitter/receiver pair). I was able to fix the unit by soldering the missing connections under a microscope, but that's far beyond typical hobbyist capabilities. Most folks would have to return the product at their own expense, or worse, would suffer an in-flight failure. Examine the unit under a magnifier before installing it!

Once all the parts were properly soldered and the board was cleaned and dried (dish soap, hot water, and a toothbrush, followed by blow-off with dry air), the unit works well. I'm using the Minoposd firmware with LibrePilot loaded on the HK CC3D Mini.
Quality
Value
Overall
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Customer files
Manual (revised edition) download now [540.32Kb]

Метки товара

Используйте пробелы для отделения меток. Используйте одинарные кавычки (') для фраз.