FPV Радиотелеметрия Kit - 915MHz

• Overall
• Quality
• Value

Customer Rated

Aug 01, 2013

Using this with APM 2.5 and Mission Planner. Worked out of the box, no issues whatsoever. Highly recommended.

• Overall
• Quality
• Value

Certified Buyer Rated

Jun 15, 2013

For the money you can't do much better...comes with all the features I need. Works well with APM 2.5

• Overall
• Quality
• Value

Customer Rated

Jun 08, 2013

Works great. Using it with Ardupilot APM 2.5.



1. Opened mission planner

2. Choose the correct com port

3. Go to 3dr configuration page

4. 'Load settings'

5. Updated the firmware

6. Connected to APM



Easy! Have flown and is a lot of fun to click where you want the copter to go.

• Overall
• Quality
• Value

Certified Buyer Rated

May 30, 2013

Excellent. Plug n Play with APM 2.5.

• Overall
• Quality
• Value

Customer Rated

May 30, 2013

I don't use APM or mission planner so i don't know if it working that way.On the bench test,with the original 3DR config tool everything worked perfect.The latest SiK firmware upgrade is made within 2 minutes both for ground and air module.With 1dbm level and not so cellular friendly enviroment i went 20 more or less meters away till my ground control software announced out of signal,but with a lot of noise according to rssi meter.I had a very little problem in changing baud rate for my FY21AP,needed a little reading...The stock whip antennas are not 900 mhz exactly or...they need to be tuned,or change them with an inverted vee dipole for perfect signal range and noise levels.Very happy for this 3dr clone.Ready to buy the 433mhz version!

• Overall
• Quality
• Value

Customer Rated

May 12, 2013

Got it less then 10 days shipping in Canada !. The connection cable is made for APM 2.5 only, it must be modified for APM 2.0 witch has different connector. Same product as 3DR but lot cheaper.

• Overall
• Quality
• Value

Certified Buyer Rated

Apr 22, 2013

hobbyking can not get this item about 2 month and i will cancel my order

• Overall
• Quality
• Value

Certified Buyer Rated

Mar 17, 2013

Muy bueno para fpv, parece buena calidad, a probarla ahora....

• Overall
• Quality
• Value

Certified Buyer Rated

Mar 10, 2013

A little difficult to get them up and running, but with perseverance your diligence is rewarded with a excellent wireless connection between your multiwii and PC.

• Overall
• Quality
• Value

Customer Rated

Mar 06, 2013

I have this up and running fine with APM2.5 and Mission Planner GCS. Pretty much zero config... just make sure you have the baud rate set to 57k. It will time out at other rates and appear broken.