Произведенный Enerland / A123 Systems
Номинальная мощность и напряжение: 1.1Ah, 3.3В
Рекомендуемый стандартный метод заряда: 1.5A до 3.6В CCCV, 45мин
Рекомендуемый быстрый ток заряда: 5A до 3.6В CCCV, 15мин
Макс непрерывного разряда: 30А
импульсный разряд в 10сек: 65A
Цикл жизни при 10С разряда, 100% DOD: более 1000 циклов
Рекомендуемый заряд / отсечки напряжение: 3.5V до 2v
Рабочая температура: -30 ~ + 60degC
Cell Вес: 39gВы можете быть в состоянии найти эти клетки по более низкой цене из отреставрировать источников или от компаний, которые более не являются A123 торговых посредников; разгружая старый инвентарь.
Все наши A123 клетки являются новыми, и мы продолжаем поддерживать хорошие отношения с A123 Systems для пополнения запасов и целей гарантии.Все A123 клетки имеют гарантию 12 месяцев!
Они являются подлинными клетки A123. Не китайские подделки.
Вес ( г )
Емкость ( мАч )
Разряд ( с)
Длина -A (мм ):
Высота - В ( мм ):
Unit Weight (g)
Max Charge Rate ( C):
. !bought 2 inorder to make a reciever pack an wow!!! perfict cells charged fuff the battery fall fast at 2.75v but who is going to tack it that low :)I give 5 stars and will recomend this battery to anyone
Excellent batteries. Small size, fits well some special applications, like airsoft guns. plus pretty hard worker battery, compared to LiPo.These batteries don't come near their big brothers, the 2300mAh cells.
These can be drained up to about 10A, anything higher than that will make the voltage drop considerably.
I've made a pack with 4 of these cells, and at 18A dicharge rate the voltage very quickly drops to about 2.5V / cell. Not good. It seems they are 10C cells.
However, they can be used in low current applications with good results. They can be used for making RX packs. And they can be recharged pretty fast.well its complicated
the battery that i got wasent original but avery good forgery
the printing was dots as if from aprinting machine but if you will look good you will see that the dots are conected and not clear
the plastic was nearley the same shade as the original and nearly the same texture
the mah is abaut 35pcnt less
i dont know all the story exactly
before ayear there were two kinds of batteries selling on the net -fake and original and the both of them were seling for 2.5$ each. this year vpower that was an ebike company that used these batteries closed . probebley they were cough by a123 company.
hobbyking use to buy the original batteries from them, now what is left is onley the coppy. i have an original battery i got last year that is much better than this one i got now.
stil you can get 700mah out of them 3times heveyer than alipoim very dis aponted
its right that there are fake a123 batteries on the net
and i have showen how to tell afake from an original in the files aded
but this exact battery without the tabs can be bough on the net for less than athird of the priceExcellent cells but capacity is nearer 950maI bought several of these a couple of years ago and soldered two in series to use as receiver packs. I also purchased PRODUCT ID: JSTMF-2S-20 balance extension wires and soldered them up to properly balance charge the two cells between flights. they hold their voltage very well between charges and can be quickly balanced charged at the field and don't need a regulator for most 6 volt capable receivers and servos. They make perfect replacement packs for 5 cell NiCads and NiMHs at about the same weight and comparible capacity, but much stronger voltage holding capability. At 5-6 amps constant load, they only drop about .5 volts, which is less than half their Nickle counterparts. Now HK has the newer, lighter flat packs at much less money and weight. Gottal love it!