CX12 / PA Premium Transparent 500g 1.75mm HobbyKing

Print with high-performance nylon filament to create spare parts, artworks and 3D models. PA-CX12 premium filament has high impact strength even at low temperatures. The filament is both scratch and crack resistant, as well as hydrophobic, meaning that it won't absorb water. 

PA-CX12@df needs to be dried for best 3D printing results. A standard air-circulated oven is sufficient. A guideline for drying is 2-3 hours at 110-130˚C for 100 gram (There is no need to remove the filament from the spool). Recommended temperature for heated bed is 80-100˚C or even higher.

PA-CX12@df will not bond perfectly to glass, but adheres well to a variety of “print stickers” and other bed adhesives. PA-CX12@df can be used on most common desktop FDM or FFF technology 3D printers. 

Trust our premium PA-CX12 filament to create the best results every time.  PA-CX12 is easy to use at a work bench or in the office thanks to its excellent dimensional stability. An excellent material choice for your next 3D printing project.

Features:
• High-performance industrial grade nylon
• Strong and flexible
• High impact, abrasion, crack & scratch resistance
• Superior chemical & UV resistance
• Excellent dimensional stability
• Low water absorption

Specs:
Width: 1.75mm
Weight: 500g
Colour: Transparent

Tensile Strength at Yield: 60 MPa
Strain at Yield: 0.08
Strain at Break: >150%
Tensile Modulus: 1400 MPa
Flexural Modulus: 1700 MPa
Flexural Strength: 90 MPa
Impact Strength - Charpynotched 23˚C: 14 kJ/m2
Moisture Absorption: 3,5%
Printing Temper: 240-260°C
Melting Points: 250°C
Shore D Hardness: 81

Storage: Cool and dry (15-25˚C) and away from UV light. This enhances the shelf life significantly.