Зарегистрируйтесь

Product Finder

Настройки

Useful links

 
[["US","AU","GB","DE"]]
Зарегистрируйтесь

hexTronik DT1000 Brushless Походный 1000kv

hexTronik DT1000 Brushless Походный 1000kv

Now save сэкономь 0,00 руб. 0,00 руб.

860,38 руб.
Нет в наличии!
Stock:
OUT OF STOCK
Вес:
140 g
Артикул:
413000003

Suggestion Box

Please let us know if you found any issues with this product listing.
We take our customer comments very seriously and in many cases our website modifications and product updates are a result of your comments!

Война цен

If you've seen a product elsewhere for a better price, please let us know! HobbyKing pride themselves on offering the best price, so if there if you see something cheaper elsewhere, let us know!

Описание
товара

Внешность может быть обманчива. Это скороход примерно в два раза размер Towerpro колокола мотора, и качается гораздо большую опору. Его двигатель используется на некоторых художественно-санитаров новых плоских комплектов, который является ее Завет долговечности, простоты использования и качества.

Спекуляция
Требуемое напряжение: 11.1V
Максимальный ток: 35A
Максимальная мощность: 500 Вт
Нет ток нагрузки: 1.2A
Вал: M4 (идеально подходит для Towerpor / GWS SF Медленная Fly реквизита)
Вес: 115г
Диаметр: 41мм
Общая длина: 66мм
Kv: 1000rpm / v
Поставляется с креплением, как показано на рисунке

Опора испытания
Опора Размер Напряжение Ампер Упорный
11x9 три лезвия 11.1V 20A 1200г

Product
Specifications

Дополнительная информация

  • Артикул:
    413000003
  • Brand:
    hexTronik
  • Вес ( г )
    140.00
  • длина
    80.00
  • ширина:
    60.00
  • Высота:
    65.00
  • Kv ( об / об)
    1000.00
  • Max Токи (A)
    35.00
  • Мощность (Вт ):
    500.00
  • Длина В ( мм ):
    33.00
  • Может Длина D (мм )
    13.00
  • Максимальное напряжение (В )
    12.00
  • Вал А ( мм):
    4.00
  • Unit Weight (g):
    115
  • Диаметр С ( мм )
    41.00
  • Общая длина E (мм )
    66.00
  • Сопротивление ( тк ):
    0.00
Community
Discussions
Rate&
Review

Напишите ваш собственный отзыв

Only registered users can write reviews. Please, sign in or sign up

Quality
Value
Overall
These are great motors - powerful and efficient - using these to increase the power on a number of models without breaking the bank or being power hungary
Quality
Value
Overall
Quality
Value
Overall
I've had very good luck with these motors. I use them on my tricopter and they have lots of power. I have 10x4.5 props, pulling around 23 amps (per motor) at full throttle. I've had to replace the bearings in one after a crash, but that's to be expected. Make sure to secure the wires to prevent stressing the the connection to the stator, I used a little bit of 5 minute epoxy, worked great.
Quality
Value
Overall
Quality
Value
Overall
???? ??? ? ??? ??? ???

?? ?? ?????
Quality
Value
Overall
Quality
Value
Overall
good engine
pulls 1375 grams with Turnigy 2200 3s nano and an old wood 11 * 7
I have two of these and will buy more
Quality
Value
Overall
Quality
Value
Overall
I use this motor in a Hk Club Trainer, with 10X6 prop and 40 ESC. I'm very satisfied with its efficiency, the plane climbs like a rocket and can performance any aerobatics with more than enough power. And furthermore a good price.
Quality
Value
Overall
Quality
Value
Overall
Mine doesn't work at all. Quality visibly worse than my original motor from Mustang P 51 Art-Tech (same as HK Mustang).
Quality
Value
Overall
Quality
Value
Overall
Este motor podria sustituirlo por El D4023 con Una 12/6 1500gramos esc 60 bis prrafo es sin ENTRENADOR Parecido al cesna 1,4 cm de envergadura.
Quality
Value
Overall
Quality
Value
Overall
this motor is just amazing I am using it with a 12x6 apc prop and a 50A ESC and a 3s 3500mwh tons of thrust and power . and just near worm after a 8 minute flight thanks hobbyking its cheap and good quality and its power .
Quality
Value
Overall
Quality
Value
Overall
my test results are
3s 12x6 57 amps i stopped a little over 1/2 throttle
where did you get 11x9 three blade 11.1V 20A from?
completely ripped off with this motor
Quality
Value
Overall
Quality
Value
Overall
I only give 3 Crowns because.....I bought four and they came with NO information. V X A = W. your specs call for a 11.1V at 35A = 388 watts??? you say 500 watts??? at 14.8 V x 35 amps = 518 watts?? So.. what is it? I don't want to burn out my motors using 14.8V But I want the 500 watts!!
Quality
Value
Overall
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Метки товара

Используйте пробелы для отделения меток. Используйте одинарные кавычки (') для фраз.