Зарегистрируйтесь

Product Finder

Настройки

Useful links

 
[["US","AU","GB","DE"]]
Зарегистрируйтесь
Shipped From:
  • Global
  • USA

hexTronik DT700 Brushless Походный 700kv

hexTronik DT700 Brushless Походный 700kv

QTY:

Now save сэкономь 0,00 руб. 0,00 руб.

774,39 руб.
Stock:
Вес:
79 g
Артикул:
DT700

Suggestion Box

Please let us know if you found any issues with this product listing.
We take our customer comments very seriously and in many cases our website modifications and product updates are a result of your comments!

Война цен

If you've seen a product elsewhere for a better price, please let us know! HobbyKing pride themselves on offering the best price, so if there if you see something cheaper elsewhere, let us know!

Описание
товара

Внешность может быть обманчива. Это скороход примерно в два раза размер Towerpro колокола мотора, и качается гораздо большую опору. Его двигатель используется на некоторых художественно-санитаров новых плоских комплектов, который является ее Завет долговечности, простоты использования и качества.
DT700 будет качать 11x4.7 SF опору красиво, чтобы произвести более 900 г тяги.
Его отлично подходит для больших foamies GWS или parkfly самолетов.

Спекуляция
Требуемое напряжение: 11.1V
Похожие Емкость батареи: 1300mAh +
Похожие Опора: 10x4.7, 11x3.8 или 11x4.7
Максимальный ток: 13A (с 11x4.7 реквизита)
Максимальная тяга: 900g +
Нет ток нагрузки: 1.2A
Вал: 4М (идеально подходит для Towerpor / GWS SF Медленная Fly реквизита)
Вес: 78g
Диаметр: 41мм
Общая длина: 77мм
Kv: 700rpm / v
Поставляется с креплением, как показано на рисунке

Отчет о проведении испытаний.
Мы использовали этот Outrunner для питания арт-тек Питтс. Запуск с 1300mAh 3S1P 20C пакет, 18А BESC и 1147 GWS / Towerpro опоры, арт-тек Питтс побежал красиво. Отличная скорость набора высоты, хотя и не hoverable, и с 13minute время полета или больше, мы были очень впечатлены.
Очень эффективный скороход для медленных летающих моделей до .15 размера.

Product
Specifications

Дополнительная информация

  • Артикул:
    DT700
  • Brand:
    Не применимо
  • Вес ( г )
    79.00
  • длина
    88.00
  • ширина:
    48.00
  • Высота:
    50.00
  • Kv ( об / об)
    700.00
  • Max Токи (A)
    13.00
  • Мощность (Вт ):
    0.00
  • Длина В ( мм ):
    38.00
  • Может Длина D (мм )
    10.00
  • Максимальное напряжение (В )
    11.00
  • Вал А ( мм):
    4.00
  • Unit Weight (g):
    78
  • Диаметр С ( мм )
    40.00
  • Общая длина E (мм )
    78.00
  • Сопротивление ( тк ):
    0.00
Community
Discussions
Rate&
Review

Напишите ваш собственный отзыв

Only registered users can write reviews. Please, sign in or sign up

Quality
Value
Overall
very powerful bell motor, i ts almost equal in performance with a 35xx motor 920k, except that its half the price , also it can handle 4s easily, if 10-12`prop-=25amb esc
if 13 prop= 30 a esc
Quality
Value
Overall
Quality
Value
Overall
Using this motor with a 30 Amp car ESC for an ROV project. So far preliminary tests are working nicely. It produces quite amount of thrust with my 57mm boat props, while submerged. the only problem I've had is that the set screws in the base seem to strip fairly easily, and I've had to drill an indent to keep the control wires from coming loos and flopping around.
Quality
Value
Overall
Quality
Value
Overall
It's a good product. It works as it should be.

Two thumbs up. I would like to recommend it to all user.
Quality
Value
Overall
Quality
Value
Overall
cheap work well and very efficient. the one and only down side is I have had 2 out of 4 have magnets come loose. I hope hk can in prove on their quality of products.
Quality
Value
Overall
Quality
Value
Overall
These motors are ok for scratchbuild multirotors, but you will soon find they are a bit sluggish. You need to epoxy the wires which I am sure has been stated, but I ruined two motors before I did it correctly. I used Amazing Goop for ease. I have these on an h-quad, but they make a lot of vibration. I think all bells have that as they have such a small support, but large bell. For the price I'm sure you can find better motors that spin freely and have no need for modification.
Quality
Value
Overall
Quality
Value
Overall
Good motors ....for the price....the issue is you can't really tighten props as if you try to screw the props too tight the shaft has a tendency to slip and cause the end ring clip to push against the bottom bearing causing the motor to run like its a bit jammed...gummy feel...I would go for the zip tie method to mount props....better bearings would be great....and neater windings would make this a killer deal....I don't think patrons would mind paying a couple of dollars more for this...all in all it is a great motor for a cheap not so trusty multicopter
Quality
Value
Overall
Quality
Value
Overall
Superb item to use in all RC stuff. Just safe peace of mind that you have a tad better item in your gear. Buy with confidence
Quality
Value
Overall
Quality
Value
Overall
good motor, altough winding is not the best quality.

If you crash your plane and shaft bends, there is no replacement parts for it.
Quality
Value
Overall
Quality
Value
Overall
best brushless motors for my projects period, I have too many of them now.
Quality
Value
Overall
Quality
Value
Overall
I have four of these DT700 motors and have used them on a tricopter preceding the quadcopter. I used these with the 11x4.7 sf props. They are good motors for the money but are a bad long term investment. They do what you want in the short run but if you are looking to go out and fly a multicopter and not worry about having a motor bearing go bad or the set screw loosen during flight or the balance being off, I would advise not to buy these motors.

If your going to build a multicopter, buy durable long lasting motors that will keep you on the flying field instead of in the workshop. Buy a quality set of motors. quality motors will most likely cost around $20-$30 per motor, especially if your using looking to get aerial footage and have a lot of expensive equipment on your multicopter. This may seem steep and I'm sure people will attest that their DT700 or DT750's work great, and good for them, but your going to spend the money either on a replacement or on bearings which will total to about the ammount of quality motors.
Quality
Value
Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Метки товара

Используйте пробелы для отделения меток. Используйте одинарные кавычки (') для фраз.