Зарегистрируйтесь

Product Finder

Настройки

Useful links

Живой чат
 
[["US","AU","GB","DE"]]
Зарегистрируйтесь
Shipped From:
  • USA

HGD цифровой 260HB CarbonGear Servo 16g / .12 / 2.0кг

HGD цифровой 260HB CarbonGear Servo 16g / .12 / 2.0кг

Discontinued Product

Please continue searching for a similar product.
Stock:
OUT OF STOCK
Вес:
51 g
Артикул:
HGD-260HB

Combine

essential items and
acc
Описание
товара

HGD Цифровой сервопривод 2.0кг
Сделано в Корее, диапазон ИНО-LAB сервоприводов предлагают превосходное качество, точность и надежность.
Высокая точность, цифровая точность и долгий срок службы делают это отличный выбор для небольших 3D листовки.

Особенности;
Высокоскоростной
Углеродные передачами.
Шариковый подшипник поддержки
Отлично подходит для парка листовки и shockflyers.
Сплав теплоотвод позволяет потенциометра и охлаждение двигателя.

Спекуляция
Скорость: .12sec / 60deg
Блокирующий момент: 2.4kg
Динамический: 2.0кг
Вес: 16,9 г
Размер: 38x30x13mm

Product
Specifications

Дополнительная информация

  • Артикул:
    HGD-260HB
  • Brand:
    Не применимо
  • Вес ( г )
    51.00
  • длина
    0.00
  • ширина:
    0.00
  • Высота:
    0.00
  • Скорость (п / 60deg )
    0.12
  • Крутящий момент ( кг ) (мин . 0,01 кг )
    2.00
  • Unit Weight (g):
    16
  • А ( мм ):
    39.00
  • В ( мм )
    31.00
  • С ( мм )
    32.00
  • D ( мм ):
    14.00
  • Е ( мм ):
    41.00
  • F ( мм )
    20.00
Community
Discussions
Rate&
Review

Напишите ваш собственный отзыв

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
Had a nasty crash with these that bent the pitch arms on an RJX head threw both links off never to be found and bent the aileron and rudder links, broke off the tailboom and snapped off the battery tray off. Two of them had gears with bent, but not stripped, teeth after this. They were still functional but felt "gritty". The gear that was damaged was the lower middle gear in both cases, all other gears were undamaged. Replaced them with HG-D261 gears (exact same gear set is used by both servos)
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Using these as cyclics in a 450 sport with the Tarot modified upper frame panels for midsized servos. You have to mount them on the inside to get straight links, elevator link will also be crooked (don't waste time trying to mount the elevator servo on the inside to get a straight link, it'll still be crooked and you'll have wasted 4 hours tearing the helicopter's back end apart and putting it back together again). Can't use the eyelets if you use them for this because they wobble too much. I used the rubber grommet and an M2x10 screw from the outside with an M2 washer and a nut behind the tabs. hold the nut and turn screw till the washer and nut touch the gromet, then let it go and turn the screw alone and friction will tighten the nut and hold the servo securely but self limit the torque so it won't damage the mounting tabs. Using these with te RJX clone head and a Robird G31 and they work great, the amount of torque they put into the blades is amazing for a 450.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Bad luck with these servo's , 2 pieces , both with defective electronics.
InoLab have clearely no quality control .
InoLab never again !
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Customer really can't make an intelligent decision from Hobby City's published data, or customer feedback with no credibility. Therefore, one must rely on manufacturers's supoort. This is where Ino Lab fails miserably, trying to market their product without letting customer know what they're buying into.

I would never consider thier product for this reason, even if product was free for I'm also charged with exhorbitant shipping cost from Hobby City. Worst experience I've encountered.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
You can use the spare gear from the robbe fs 550 speed carbon digital servo.It fits 100 to HGD digital 260HB servo.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
These servos are just awesome . I am using 6 of them in my EFlite ultrastick 25e , centre excellent and I have had no issues whatsoever even with a life reciever pack delivering 6.6v no issues. I have ordered more and will continue with inolab thanks
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
really great servo, really smooth and powerfulll
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
recomended for 450 size helis
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
In Normal Servo mode, it's fine. I was hopeing to take advantage of the "Digital" performance but I may need to try another Gyro capable of digital servos to see if it isn't my gyro
verified_user Quality