Зарегистрируйтесь

Product Finder

Настройки

Useful links

 
[["US","AU","GB","DE"]]
Зарегистрируйтесь

VI Модуль HK Pilot питания, распределительный щит и двойной UBEC All-In-One (120A и 10s)

VI Модуль HK Pilot питания, распределительный щит и двойной UBEC All-In-One (...

Now save сэкономь 0,00 руб. 0,00 руб.

1 225,60 руб.
Нет в наличии!
Stock:
OUT OF STOCK
Вес:
101 g
Артикул:
9387000061-0

Suggestion Box

Please let us know if you found any issues with this product listing.
We take our customer comments very seriously and in many cases our website modifications and product updates are a result of your comments!

Война цен

If you've seen a product elsewhere for a better price, please let us know! HobbyKing pride themselves on offering the best price, so if there if you see something cheaper elsewhere, let us know!

Описание
товара

Модуль распределения и мощности HK Pilot мощность в одном упрощает настройку, сокращение точек отказа и делает для чистой и опрятной установки. All-in-One имеет PDB, Dual 12V и 5.3V UBECs, напряжения и датчики Amperage интегрированы на монтажном корпусе стандартизированная 45мм.

Сторона распределения питания на стандартизированном размер 45x45mm монтажа и рассчитан на 120А тока и более чем достаточно точек контакта для Octocopter. Двойной UBEC являются 12V и 5.3V соответственно, для контроллера пилот Flight HK и 12V Окс передач, таких как FPV. Amp и датчик напряжения совместимы с HK пилот FC и APM / Pixhawk FC со стандартизированным разъемом 6 выводами. ALL-IN-ONE является 10s, способные, а также для применения высокого напряжения или прямо у себя дома с 3s установками тоже.

Особенности:
PDB / 12V и 5.3V UBECs / V и А датчики все в одном
120A способен
10s способные
16 питания контактных выходов 8+ 8-
Унифицированная проклейки
HK Pilot APM / Pixhawk совместимый

Технические характеристики:
PCB ток: 120А выходы (MAX)
Выход UBEC ток: 2.5A
Потребляемая мощность: 2 х контактных точек
Выходная мощность: 16/8 х контактных точек и 2 для 12V UBEC 5.3V на 6 Pin Plug
Размеры: 50x50x5mm, Монтаж 45x45
Вес: 11,6 г

В коплект входит
UBEC распределения питания * 1
6pin кабель * 1

Product
Specifications

Дополнительная информация

  • Артикул:
    9387000061-0
  • Brand:
    Не применимо
  • Вес ( г )
    101.00
  • длина
    50.00
  • ширина:
    10.00
  • Высота:
    50.00
Community
Discussions
Rate&
Review

Напишите ваш собственный отзыв

Only registered users can write reviews. Please, sign in or sign up

Quality
Value
Overall
Nice little PDB with everything you need
Quality
Value
Overall
Quality
Value
Overall
This board could benefit from a few design changes. First, the board should have thermal relief pads to make soldering easier. Second, holes could be drilled to make the physical wire connection more robust. Third, the addition of LEDs on the voltage regulators would make this product a little more user friendly.

I agree with the other reviewers that soldering to this board is very difficult. The secret is to use a good quality gun with good thermal recovery.
Quality
Value
Overall
Quality
Value
Overall
bonne plaque de distribution, pour le poids, le prix, et les deux sorties 5V et 12V
Quality
Value
Overall
Quality
Value
Overall
these boards are pretty much bulletproof, its my 4th one and i havn't had any issues with any of them
Quality
Value
Overall
Quality
Value
Overall
Nicely made and finished power distribution board with many input and output pads which provide easy soldering (just put the soldering iron on 400 degrees). Because of this it will be really hard to notice that you soldered wires by hand.
Quality
Value
Overall
Quality
Value
Overall
???? ??? 120????? ??..

?? ????!
Quality
Value
Overall
Quality
Value
Overall
Used the PDB on an X580 frame with a 4S battery powering 4 NTM 35-48 motors. Read the reviews of it being hard to solder, a cheap 15W soldering iron with an old tip will certainly not do the trick but a 65W iron worked just fine. Haven't used the BEC capability so can't comment, and since I have a quad only using half of the board but the price can't be beat and saves you from having to fabricate your own. Very pleased.
Quality
Value
Overall
Quality
Value
Overall
very difficult to weld while you use flux. I do not know what has or varnish coating leads but it is very difficult to weld. a good product that eventually turns into a nightmare thinking that cables can be released. As the wires carry the energy of our birds , we know what happens in case of a power failure ...
Quality
Value
Overall
Quality
Value
Overall
I purchased this for a QAV250 clone, the board is a good size but a bit bulky for a mini quad. No problems running it but not ideal for super compact setups. Great value for money.

Quality
Value
Overall
Quality
Value
Overall
Well.. I thought I found the perfect board.. When you get it you think.. Nice.. Good quality. The board is really thick. Perfect for High CUrrent. 5.3/Amperage Reading/12V - PERFECT.

But there is a bottom side. As some mentioned here: ITs the 12V Regulator. After ~4h of total use it poofed in smoke. Hopefully my 12V Cam Hardware is not damaged. Need to see what Hobbyking does.
Quality
Value
Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Метки товара

Используйте пробелы для отделения меток. Используйте одинарные кавычки (') для фраз.