New Items ФОРУМ
Зарегистрируйтесь

Итоговая цена

0,00 руб.

Cart 0 Cart 0 Loading...

HKP8-С10 Система Micro питания с коробкой передач плюс Prop 8700kv

HKP8-С10 Система Micro питания с коробкой передач плюс Prop 8700kv

Discontinued Product

Please continue searching for a similar product.
Вес:
18 g
SKU:
HKP8-C10
WANT FREE SHIPPING? Click here to find out more!
Micro Бесщеточный скороход с редуктором и 7x3.5 Prop.
Огромный крутящий момент для небольшой двигательной системы.
Характеристики:
Тип: Бесщеточный
Размер (двигатель / коробка передач): 44 х 32мм
Длина вала (проп крепление): 15 мм
Диаметр вала (проп крепление): 3.7mm
Вес: 10 г
Максимальный ток: 4.8а
Макс Ватт: 40W
KV: 8700rpm / v
Макс Вольты: 8.4V
Похожие опоры: 7x3.5
Данные испытаний;
Напряжение: 7.4V, 8.4V
Ток: 4.1A, 4.8а
Watts: 30.34, 40.32W
Упорный: 172g, 212g
Эффективность (г / ш): 5,67, 5,26
  • Артикул HKP8-C10
  • Brand -
  • Вес ( г ) 18.00
  • длина 175.00
  • Width 21.00
  • Высота 70.00
  • Kv ( об / об) 8700.00
  • Max Токи (A) 5.00
  • Сопротивление ( тк ) 0.00
  • Максимальное напряжение (В ) 8.00
  • Мощность (Вт ) 40.00
  • Вал А ( мм) 1.00
  • Длина В ( мм ) 6.00
  • Диаметр С ( мм ) 18.00
  • Может Длина D (мм ) 5.00
  • Общая длина E (мм ) 17.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Vraiment du par ce produit, l'hlice ne se monte pas dessus il faut l'ajuster!
Je l'ai utilis sur un modle indoor 3D de 65cm d'envergure et 120gr RTF en 2S lipo, le moteur a eu du mal le faire dcoller, alors pour la 3D il est vraiment pas conseiller!
De plus, au premier vol, l'axe de la couronne secondaire s'est dsolidariser!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Vraiment du par ce produit, l'hlice ne se monte pas dessus il faut l'ajuster!
Je l'ai utilis sur un modle indoor 3D de 65cm d'envergure et 120gr RTF en 2S lipo, le moteur a eu du mal le faire dcoller, alors pour la 3D il est vraiment pas conseiller!
De plus, au premier vol, l'axe de la couronne secondaire s'est dsolidariser!

A nice combo to have for self-built indoor flyer. A good replacement for efilite micro model too.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

A nice combo to have for self-built indoor flyer. A good replacement for efilite micro model too.

Buena opcion para mi avion f3p

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Buena opcion para mi avion f3p

Have not been able to test yet but find one major flaw. The Prop adapter is a slip fit and doesn't allow anyway to tighten the prop to the shaft. I will have to use some type of glue to secure it or try to thread the plastic prop mount to accept a screw. Also there are only 2 hookup points for the mount. Three would be better so you can set side and down thrust. As it stands I will have to make several mounting boards with different offsets until the correct thrust line is determined.

Randy

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Have not been able to test yet but find one major flaw. The Prop adapter is a slip fit and doesn't allow anyway to tighten the prop to the shaft. I will have to use some type of glue to secure it or try to thread the plastic prop mount to accept a screw. Also there are only 2 hookup points for the mount. Three would be better so you can set side and down thrust. As it stands I will have to make several mounting boards with different offsets until the correct thrust line is determined.

Randy

Was able to destroy this motor gearbox combo within an hour of bench testing. First the prop started to slip on the shaft adapter. So I fixed that. Second the large gear started to slip outward toward the prop. So I fixed that. Third motor mounted gear moved in toward the motor. So I fixed that. fourth after running off and on with a 2S pack I noticed some notchy rotation. Inspection revealed the prop shaft had worn its hole in the plastic mount out. Could not fix that.

The motor actually ran fine and the metal 1.5MM prop shaft is pretty hard. Unfortunately the plastic bearing surface is not so tough. You may have better luck than I did but I can not recomend this item.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Was able to destroy this motor gearbox combo within an hour of bench testing. First the prop started to slip on the shaft adapter. So I fixed that. Second the large gear started to slip outward toward the prop. So I fixed that. Third motor mounted gear moved in toward the motor. So I fixed that. fourth after running off and on with a 2S pack I noticed some notchy rotation. Inspection revealed the prop shaft had worn its hole in the plastic mount out. Could not fix that.

The motor actually ran fine and the metal 1.5MM prop shaft is pretty hard. Unfortunately the plastic bearing surface is not so tough. You may have better luck than I did but I can not recomend this item.

Motor seems very notchy, maybe due to small number of magnets in shell. Makes gearbox seem to be binding. With gearbox will not start on 1 cell using either TG or HC 1s 3A ESC. Will run on 2s but I do not have a 2s application small enough. I will try the motor without GB on 1s and see how that goes.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Motor seems very notchy, maybe due to small number of magnets in shell. Makes gearbox seem to be binding. With gearbox will not start on 1 cell using either TG or HC 1s 3A ESC. Will run on 2s but I do not have a 2s application small enough. I will try the motor without GB on 1s and see how that goes.

Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!