HKPilot Mega 2.7 контроллер Flight USB / гироскоп / ACC / MAG / BARO

• Overall
• Quality
• Value

Good Board

Oct 30, 2016

Good board, easy to use and setup. The connectors are Molex Picoblade 1.25mm (these are white), not Hirose DF13 (3DR produced boards use these and they are beige). When getting cables make sure you are buying the right one. Arducopter no longer support these boards, so you wont be able to flash firmware higher then 3.2.1. The board is a clone of the APM 2.6, so when looking online for info look up the APM 2.6

• Overall
• Quality
• Value

Customer Rated

Jun 01, 2015

This FC is awesome and loaded with features for the price. I consider myself a bad pilot and back when I did RC heli I quit doing it because cost from crashes was getting to high. This board with RTL (Return To Launch) has save my lots in what of been crashes. This board has built in gimbal control, gps hook up, etc. A lot for the money, but most important compatible with easy to use software with lots of online instructions.

• Overall
• Quality
• Value

Customer Rated

May 03, 2015

We use this HK version in my College UAS course. We've tested this one verses the name brand that this is cloned from and don't see any difference between them related to setting up, programming or flying. For most students, we save a few dollars when we can, so this is the one the professor recommends the students to buy.

• Overall
• Quality
• Value

Certified Buyer Rated

Apr 30, 2015

Works surprisingly well! Very stable flight. Easy to configure with APM Planner.

• Overall
• Quality
• Value

Customer Rated

Apr 10, 2015

Great Board for the price. Maintains good position hold with a Quanum LEA-6h Gps. You must mount the controller to eliminate vibration,using foam etc. Using the Mission Planner software is straight forward,firmware I recommend no higher than v3.2 at this present time. Loses 1 star for having the cover screws on the bottom. A lot more practical if you could access them from the top. I'm new to the multi-rotor hobby and found it easy to use and customise. I'm a fan of open source!

• Overall
• Quality
• Value

Customer Rated

Apr 03, 2015

Bought this to replace my KK2.1 which I had outgrown in five months!!! Looked around at what was available, and really liked the APM model. The HKPilot Mega is a lot cheaper, but still has the same functionality as the real APM Mega. Have got this running faultlessly on my SK450 Deadcat with Q Brain 25A ESC. A few hiccups setting it up, but nothing that Google couldn't sort out for me. I have it running very, very stable with all the tricks ... Drift, RTL, Loiter, GPS, Compass. Really like the downloadable data files so that you can review the telemetry from each flight (not interested in real time stats, just yet). Seem to be getting more flight time out of this flight controller than the KK2.1 - 1 to 2 mins more.

• Overall
• Quality
• Value

Customer Rated

Mar 08, 2015

Using this on my DIY tricopter and works perfectly! Arrived with no problems. You will have to DIY a foam insulator for the barometer as no foam is provided. Screws are mounted from the base so a pain when you need to open the case when it's mounted on your multirotor. 2 jumpers in the HKPilot- one to be removed if your using the Power Module and another to remove when using an external compass. External Compass port is just below the GPS port unlike the 3DR board. Finish is good and soldering is neatly done. Comes with small bits of foam double sided tape, but I used my own tape instead.
Hooked up to Mission Planner without a glitch and firmware loaded with no issues. calibration via mission planner was troublefree! For the cost...Happy and Satisfied as my tri flies perfectly! Recommended!!

• Overall
• Quality
• Value

Certified Buyer Rated

Mar 02, 2015

My housing was a little warped making it difficult to put together initially. Otherwise really easy to get working

• Overall
• Quality
• Value

Certified Buyer Rated

Feb 11, 2015

Awesome flight controller! You can do anything with this!

• Overall
• Quality
• Value

Customer Rated

Jan 29, 2015

Ho installato la scheda su un trex500, non facilissimo, arducopter la versione piu' difficile da mettere a punto, ma seguendo la guida on-line si riesce a metterla a sopperire. La scheda funziona molto bene ed assemblata con criterio, si noti che arriva senza un rigo di istruzioni. comunque 5 stelle.