New Items ФОРУМ
Зарегистрируйтесь

Итоговая цена

0,00 руб.

Cart 0 Cart 0 Loading...

HKPilot Mega LED Driver Board 12V (4ch) (APM)

HKPilot Mega LED Driver Board 12V (4ch) (APM)

Shipped From:
  • Global
QTY:

Now save сэкономь 0,00 руб. 0,00 руб.

296,76 руб.
Статус:
Есть в наличии
Вес:
18 g
SKU:
387000046-0
WANT FREE SHIPPING? Click here to find out more!

Это простой в использовании светодиодные табло драйвер разработан и настроен для запуска внешних светодиодных индикаторов с вашего HKPilot Mega или APM. Вы можете легко контролировать 12 светодиодов до 700мА от A4 ~ 7 контактов на вашем APM совместимый контроллер Flight. 12V внешняя высокой видимости светодиодные индикаторы для моторных оружия, статуса Arm, GPS, и низкого напряжения теперь могут легко управляться с этим должно иметь контроллер полета аксессуар.

Технические характеристики:
Входное напряжение: до 12В
Выход: 700mA
Вес: 5,3 г
Каналы светодиодов: 4

* Примечание: Ссылка на APM относится к проекту ArduPilot, семейство автопилотов с открытым исходным кодом на основе открытого исходного кода вычислительной платформы Arduino, разработанной 3dr и открытым исходным кодом сообщества. Она состоит из выбора ArduPilot Mega (APM) электроники и ряд бесплатных версий программного обеспечения для различных транспортных средств и регулируется с открытым исходным кодом лицензии на Creative Commons.

* Примечание: Это не оригинальный Arduino продукт бренда.

  • Артикул 387000046-0
  • Brand H-King
  • Емкость ( мАч ) -
  • Вес ( г ) 18.00
  • длина 30.00
  • Width 10.00
  • Высота 30.00
  • HK Pilot Mega Accessories
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Easy to setup and does exactly what it is suppose to.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Easy to setup and does exactly what it is suppose to.

Great little board. Built flame wheel quad with HK Pilot Mega. Used four green / red LED strips for the arms. Connected the driver board input connection to the pilot mega inputs. Connected the very small power wires to the power distribution board. Great light display whin the quad is powered up.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Great little board. Built flame wheel quad with HK Pilot Mega. Used four green / red LED strips for the arms. Connected the driver board input connection to the pilot mega inputs. Connected the very small power wires to the power distribution board. Great light display whin the quad is powered up.

using this in combination with strip lights makes it easier to know whats happening. im using it for Arming, GPS might add a 12v buzzer as well

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

using this in combination with strip lights makes it easier to know whats happening. im using it for Arming, GPS might add a 12v buzzer as well

Used with 4x 3-LED long RGB-strips, one Red, one Green, one Blue and one White. Works great, and apparently on lower voltages too (~9 V) if you prefer dimmer LEDs, feeding with 3S should work, maybe even 2S if you'd need it? Hardware information: The chip is a Texas Instruments ULN2003A Darlington transistor array, datasheet can be found by searching for "uln2003a.pdf", seems like it has the capability to drive up to seven loads.
Downsides: The 12V input wires seem a bit flimsy for 700mA.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Used with 4x 3-LED long RGB-strips, one Red, one Green, one Blue and one White. Works great, and apparently on lower voltages too (~9 V) if you prefer dimmer LEDs, feeding with 3S should work, maybe even 2S if you'd need it? Hardware information: The chip is a Texas Instruments ULN2003A Darlington transistor array, datasheet can be found by searching for "uln2003a.pdf", seems like it has the capability to drive up to seven loads.
Downsides: The 12V input wires seem a bit flimsy for 700mA.

Great board. It came without instructions,but I soldered some test leds and figured out outputs.I use it on my s500 quadcopter - apm 2.5.2 from HK. Led strip(6x smd led) on each arm of frame. Just set parameter "LED_MODE" to 107(default is 9). I have gps lock blue led. When battery voltage is low red leds are flashing. Firmwavre is AC 3.2 rc7.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Great board. It came without instructions,but I soldered some test leds and figured out outputs.I use it on my s500 quadcopter - apm 2.5.2 from HK. Led strip(6x smd led) on each arm of frame. Just set parameter "LED_MODE" to 107(default is 9). I have gps lock blue led. When battery voltage is low red leds are flashing. Firmwavre is AC 3.2 rc7.

No instructions came with mine. The video is too general to be useful. Please supply a wiring layout or smple setup so that people can use these.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

No instructions came with mine. The video is too general to be useful. Please supply a wiring layout or smple setup so that people can use these.

Customer files
Ignore my horrible soldering! ;) Download [1238]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save