New Items Новости ФОРУМ
Зарегистрируйтесь

Итоговая цена

0,00 руб.

Cart 0 Cart 0 Loading...

Hobbyking Космический Ветер 920mm (/ Бало / слойный Стекловолокно) Комплект

Hobbyking Космический Ветер 920mm (/ Бало / слойный Стекловолокно) Комплект

Shipped From:
  • Global
Discontinued Product

Please continue searching for a similar product.
WANT FREE SHIPPING? Click here to find out more!

Космический Ветер был спроектирован и построен главным пилотом Локхида испытания, Тони Levier и группой инженеров Lockheed. Очень маленький гонщик одномандатному, он был направлен на Goodyear Trophy для Формулы 1 класса гонщиков, инициированных в США вскоре после Второй мировой войны. Это цельнометаллический низким расположением крыла моноплан. Крылья и хвостовое оперение все Ровные и сужаться. Элероны полный пролет и нести триммеры, как это делает полный плавника глубины руля направления. Ходовая часть фиксируется с обтекаемыми основных ног и колес в длинных обтекателей. Ролик хвостовое колесо заправленные в заднем углу фюзеляжа за рулем. Кабина прилагается небольшой, штучными, плексиглас навесом. Первые самолеты были оснащены 85 л.с. (63 кВт) Continental C-85 горизонтально-оппозитный двигателей, но в последнее время, по крайней мере четыре использовали 100 л.с. (75 кВт) Continental O-200-A. Установка двигателя включает в себя большой заостренный кок и длинный, луковичные головки блока цилиндров / выпускных обтекатели. Три Космические Ветры были построены в Lockheed в период между 1947 и 1948 годами и четвертый, а позже, пятый был построен в США любительских конструкторах, последний пример был построен в Великобритании, как в конце 1972 года.

Hobbyking Космический Ветер элегантный и быстрый ищет пример с высоким качеством стекловолокна фюзеляжа, с бальзы и облегченный слойные создали конструкцию крыла. Все детали были красиво CNC вырезать, что делает для очень сильного света планера. Большой стекловолоконный люк для доступа батареи, расположенный под носом магнитно прилагается, которая позволяет достаточно места для выбранной батареи. Ходовая часть представляет собой весь металл двойной тип листа с стекловолокна колеса брюки. Существует надежное крепление двигателя в носу, позволяя безопасную фиксацию выбранного двигателя 35 мм. Космический ветер требует строительные работы, рога и управляющие поверхности требуют фитинга, а также секции хвоста и элеронов требуют заклейки на место и, конечно же двигателя и R / C оборудование нужно установки, но 2 или 3 вечера работы должны увидеть Космический ветер на стартовой линии для вашей собственной расы Goodyear Trophy.
Монтаж на аэродроме очень быстро и просто, соединенные крылья болт на месте с помощью колышков на переднем крае, чтобы обеспечить плотную посадку. В целом очень хороший легко построить и летать масштабную модель, которая будет восхищаются на любом летном поле модели.

Особенности:
• Шкала выглядит с быстрой, легкой обработки
• Красиво обработанная, высокое качество планера и покрытия
• Предварительно сделал ходовая часть и рулевое хвостовое колесо
• Стекловолокно фюзеляж и колеса брюки
• Высокое качество крепеж в комплекте
• Простой и простой, чтобы построить

Технические характеристики:
Размах: 920mm
Длина: 755 мм
Полетный вес: 850г (меньше батареи)

Требуется:

Ваш собственный 4 ~ 6-канальный передатчик и приемник
35-XX Бесщеточная или похожую,
Spinner, пропеллер и адаптер
40 ~ 50A ESC
4x Mini сервоприводы
2200 3s Липо

  • Артикул 189000046
  • Brand HobbyKing
  • Емкость ( мАч ) -
  • вес 1939.0000
  • длина 770.00
  • Packaging Width 180.00
  • Высота 270.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Nice plane. Quite small and I intend to add an orange flash made of monokote on the top surface of one wing.

Take note of the location of the wing retention nuts - in mine, the ply was delaminated.

Using an NTM 2836-2700 motor and a YEP 40A ESC (and Savox SH-0257MG servos) and pretty stock hardware.

The battery hatch magnets are terribly weak. I did not trust them and instead used a latch to add a latch lock for the battery hatch. See the images.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Nice plane. Quite small and I intend to add an orange flash made of monokote on the top surface of one wing.

Take note of the location of the wing retention nuts - in mine, the ply was delaminated.

Using an NTM 2836-2700 motor and a YEP 40A ESC (and Savox SH-0257MG servos) and pretty stock hardware.

The battery hatch magnets are terribly weak. I did not trust them and instead used a latch to add a latch lock for the battery hatch. See the images.

Correct: Fuselage fiberglass is NOT the thinnest so it will take the speed of this plane.

I gave 4 starts for overall, 5 starts for value of the low cost, 3 for quality. If screws holes are pre-drilled, magnets are install properly, hinges are pre-install it will get 5 starts.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Correct: Fuselage fiberglass is NOT the thinnest so it will take the speed of this plane.

I gave 4 starts for overall, 5 starts for value of the low cost, 3 for quality. If screws holes are pre-drilled, magnets are install properly, hinges are pre-install it will get 5 starts.

The four magnets that hold the battery hatch cover were installed behind fiber glass (not on the surface, two pairs of magnets are not touching or close to each other), so the holding force is much weaker, without any improvement it will falls during flights in a matter of time.
Has to cut the pre-cut canopy to the right size before gluing.
Little decals to apply, the bottom of the wind and stabilizer are black and white checker flag pattern.
My final weight is 36oz instead of 30oz GP. Or 630g without motor, ESC, battery and no prop/spinner.
A big killer for vertical performance.
Tips: Make sure the elevator joiner wire is installed BEFORE securing the two elevators to the stabilizer.
As GP instruction, using 30 minutes epoxy is a good choice to secure the elevator as it will give enough time for adjustment.
Plane design are very similar if not the same, material used are less than par, except the wind join which use fiberglass. Overall weight is a big killer, if you are not an experience builder; think twice in getting this lower cost version. If you dont enjoy building, the extra works/time you spend would outlast the saving. And you might end up with a second grade model.
No flight test yet as Im not a winter bird.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

The four magnets that hold the battery hatch cover were installed behind fiber glass (not on the surface, two pairs of magnets are not touching or close to each other), so the holding force is much weaker, without any improvement it will falls during flights in a matter of time.
Has to cut the pre-cut canopy to the right size before gluing.
Little decals to apply, the bottom of the wind and stabilizer are black and white checker flag pattern.
My final weight is 36oz instead of 30oz GP. Or 630g without motor, ESC, battery and no prop/spinner.
A big killer for vertical performance.
Tips: Make sure the elevator joiner wire is installed BEFORE securing the two elevators to the stabilizer.
As GP instruction, using 30 minutes epoxy is a good choice to secure the elevator as it will give enough time for adjustment.
Plane design are very similar if not the same, material used are less than par, except the wind join which use fiberglass. Overall weight is a big killer, if you are not an experience builder; think twice in getting this lower cost version. If you dont enjoy building, the extra works/time you spend would outlast the saving. And you might end up with a second grade model.
No flight test yet as Im not a winter bird.

The Blue Cosmic Wind from HK is a clone not the same one from GreatPlanes.
$50 vs $100-130 on your LHS.

Following are the differences beside color scheme. Blue v.s. white or red.
No instruction manual was given has to follows GPs instruction.
No spinner, no collet prop adaptor. $
Ailerons are not pre-hinged as original GP, the thick round fiber plastic are given. More works
Wing joiner is a 12mm diameter, 18CM long fiber tube instead on the short wood joiner. It should be better as it is much longer than the original. But my tube was meshed on one end.
Mounting holes form main landing gear are not pre-drilled, same as the two wheels pants, has to drill carefully with proper alignment.
The tail wheel gear is not up to par as the original GP, the part to secure to the tail (fuselage) is poor.
The single screw, oversize tail gear holder will not secure good to the fuselage without any modification.
Wing dowels is fiber glass not wood. Should work the same.
Fuselage fiberglass is the thinnest so it will take the speed of this plane.
As someone mentioned, this firewall is thick. Same as the GP it was not overly secured. From experience I added thick epoxy around the firewall to make it more secure to the fiberglass surrounding. So a minor nose down would not separate the firewall from the fuselage.
The four magnets that hold the battery hatch cover were installed beh

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

The Blue Cosmic Wind from HK is a clone not the same one from GreatPlanes.
$50 vs $100-130 on your LHS.

Following are the differences beside color scheme. Blue v.s. white or red.
No instruction manual was given has to follows GPs instruction.
No spinner, no collet prop adaptor. $
Ailerons are not pre-hinged as original GP, the thick round fiber plastic are given. More works
Wing joiner is a 12mm diameter, 18CM long fiber tube instead on the short wood joiner. It should be better as it is much longer than the original. But my tube was meshed on one end.
Mounting holes form main landing gear are not pre-drilled, same as the two wheels pants, has to drill carefully with proper alignment.
The tail wheel gear is not up to par as the original GP, the part to secure to the tail (fuselage) is poor.
The single screw, oversize tail gear holder will not secure good to the fuselage without any modification.
Wing dowels is fiber glass not wood. Should work the same.
Fuselage fiberglass is the thinnest so it will take the speed of this plane.
As someone mentioned, this firewall is thick. Same as the GP it was not overly secured. From experience I added thick epoxy around the firewall to make it more secure to the fiberglass surrounding. So a minor nose down would not separate the firewall from the fuselage.
The four magnets that hold the battery hatch cover were installed beh

On hyperion 3025-08 and Nano-tech 6s 2200mah battery, this thing really screams! close to 200km/h. have beefed up elevatorstabs, other than that its stock config.
Flies straight and true, even better than quite alot of .40 size birds
Aerobatic is superb with different motor config.
batteryhatch doesnt fit very well.
best bang for buck ive ever bought!!


verified_user Quality:
trending_up Value:
playlist_add_check Overall:

On hyperion 3025-08 and Nano-tech 6s 2200mah battery, this thing really screams! close to 200km/h. have beefed up elevatorstabs, other than that its stock config.
Flies straight and true, even better than quite alot of .40 size birds
Aerobatic is superb with different motor config.
batteryhatch doesnt fit very well.
best bang for buck ive ever bought!!


Hello guy's. Just to let You known that I did put a video of my flight with this Cosmic 920mm. As You will see.......all went smooth et very nice. a small video for my report..........Lollllllllll

Do not forget.........I had to do some modifications regarding the wooden engine mount. You will have to do some modifications at the engine mount if You do not want any bad surprises. Ciaoooooooo

Enjoy...............

MD

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Hello guy's. Just to let You known that I did put a video of my flight with this Cosmic 920mm. As You will see.......all went smooth et very nice. a small video for my report..........Lollllllllll

Do not forget.........I had to do some modifications regarding the wooden engine mount. You will have to do some modifications at the engine mount if You do not want any bad surprises. Ciaoooooooo

Enjoy...............

MD

Finally managed a sucessful flight after repairs and mods. With new firewall (ring) fully epoxied in and motor mounted on the std aluminium cross on the front of the firewall, and around 2 DEG down and 2 DEG right thrust and balancing (upside down) at 52mm from the leading edge it flew well. Flies around 60mph wot with the TGY 2836 1200kv o/r and 20c 2200mah zippy LiPo and tracks nicely at any speed. It does not like too much elevator in a loop and will fly right through too much input at speed.

Small inputs only are required to fly smoothly and rolls are smooth with no funny habits. This plane would be a candidate for a good set of flaps or perhaps airbrakes as it does not want to come down for a landing. It is going to take a few landings to find how slow I can get it as my first one was about 200 feet, and that was with 6 attempts to get it slow enough! This is NOT a park flier and I would not suggest it for novices as you could get into trouble quickly with this as it won't forgive a mistake anywhere near the ground! With a bigger motor and battery I think this would be starting to become a brick and not be as pleasant to fly unless you prefer missiles!. With the 2200mah 20c I got 10mins of mixed flying with 20pcnt left in the battery and with everything cool to barely warm. 1 star off for weak tailplane and slack glueing of firewall and front wing mount, 5 stars for flying

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Finally managed a sucessful flight after repairs and mods. With new firewall (ring) fully epoxied in and motor mounted on the std aluminium cross on the front of the firewall, and around 2 DEG down and 2 DEG right thrust and balancing (upside down) at 52mm from the leading edge it flew well. Flies around 60mph wot with the TGY 2836 1200kv o/r and 20c 2200mah zippy LiPo and tracks nicely at any speed. It does not like too much elevator in a loop and will fly right through too much input at speed.

Small inputs only are required to fly smoothly and rolls are smooth with no funny habits. This plane would be a candidate for a good set of flaps or perhaps airbrakes as it does not want to come down for a landing. It is going to take a few landings to find how slow I can get it as my first one was about 200 feet, and that was with 6 attempts to get it slow enough! This is NOT a park flier and I would not suggest it for novices as you could get into trouble quickly with this as it won't forgive a mistake anywhere near the ground! With a bigger motor and battery I think this would be starting to become a brick and not be as pleasant to fly unless you prefer missiles!. With the 2200mah 20c I got 10mins of mixed flying with 20pcnt left in the battery and with everything cool to barely warm. 1 star off for weak tailplane and slack glueing of firewall and front wing mount, 5 stars for flying

Hi guy's! I stated my first flight report in the discussions tap. You Can also see some photos at the files tap. Ciaoooooooo

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Hi guy's! I stated my first flight report in the discussions tap. You Can also see some photos at the files tap. Ciaoooooooo

Hi guy's! You Can Read m'y first report in the discussions files and see some photos in the files tap.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Hi guy's! You Can Read m'y first report in the discussions files and see some photos in the files tap.

Gran avin, configuracin an por determinar, es bonito y liviano

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Gran avin, configuracin an por determinar, es bonito y liviano

  1. 1
  2. 2
Customer files
NEW MOTOR MOUNT DETAIL Download [164]
TWIN AILERON SERVOS HK928BB Download [64]
ESC AND UBEC PLACEMENT Download [84]
COSMIC WIND MODDED Download [117]
TAILWHEEL MOD Download [94]
COCKPIT ADDITIONS Download [128]
Final configuration rear Download [193]
Final configuration front Download [327]
SERVO AND RX PLACEMENT Download [144]
MOTOR MOUNT NEW POSITION Download [164]
  1. 1
  2. 2
  3. 3
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save

Radio Control Planes, Drones, Cars, FPV, Quadcopters and more - Hobbyking