Зарегистрируйтесь

Product Finder

Настройки

Useful links

Живой чат
 
[["US","AU","GB","DE"]]
Зарегистрируйтесь

Hobbyking DH Tiger Moth RAF 912mm (PNF)

Hobbyking DH Tiger Moth RAF 912mm (PNF)

Discontinued Product

Please continue searching for a similar product.
Stock:
OUT OF STOCK
Вес:
1870 g
Артикул:
TigerM-Y-PNP
Описание
товара

Tiger Moth можно лучше всего охарактеризовать как Iconic, он был разработан с очень удачном непарного шелкопряда и дизайн Джеффри De Havilland в 1930 году в соответствии со спецификациями Министерства воздуха для нового предварительного тренера для РФС. Наиболее заметным особенность, которая отличает Tiger Moth от аналогичных DH би-плоскостей является отличительной прокатилась верхней крыла, что позволило более широкий доступ для пилота во время ношения парашют. Tiger Moth не пошел дальше, чтобы стать огромным успехом во всем мире и используется несколькими airforces, он не был заменен RAF до 1952 года, когда DH Бурундук был введен в эксплуатацию, "Tiggy" по сей день очень популярный выбор с пилотами во всем мире, и, как известно, быть полезным, чтобы летать.

Это Hobbyking Tiger Moth является высокое качество, полностью в доме дизайн и развития, который является эксклюзивным для нас. Изготовлен из прочного EPO, легко самым масштабным пена Tiger Moth доступны и просто капает в формованной масштабе подробно. Достаточно маленький, чтобы транспортировать достаточно легко еще большой, чтобы иметь реальное присутствие как на земле, так и в воздухе, это идеальный размер для пены шкалы BIPE. Будучи подключи и Fly, двигатель, ESC и сервоприводы являются все заранее установленные и много работы сделано, но было бы справедливо сказать, что немного больше монтажных работ требуется, чем у многих моделей PNF, которые вы ожидали бы от биплан.

Летные характеристики этого Tiger Moth просто выдающимся, вам будет трудно толкнул, чтобы найти любую пену модель в своем классе, чтобы соответствовать этому. Отличные 9g сервопривода идеально согласованы с поверхностями управления и двигатель с низким киловольт идеально подобранных к 10 "SF опору, которая дает Tiger Moth много в проп нахлынуть это поверхностей управления для лучшего контроля при пролетов на шкале скорости. Дроссельной заслонки и реалистичные пилотажных находятся в нескольких синхронизации, вы просто не устают этой превосходной масштабной модели. HobbyKing "Tiggy" есть все, качество, масштаб деталей, практичность, потрясающую производительность, прочность и превосходные внешний вид, это должно быть для вешалки любого масштаба пилот RC и энтузиастов.

Технические характеристики:
Размах: 912mm
Длина: 772mm
Площадь крыла: 24.2g / дм2
Нагрузка на крыло: 26г / дм2
Полетный вес: 620g ~ 680g
Сервопривод: 9g х 4
ESC: 20A ж / BEC
Двигатель: 28мм 1000kv
Поддерживают: 10x4.7SF

Включает:
Все комплектующие
такелаж провода
клей
инструкции
(Водная горка отличительные знаки предварительно нанесенным)

Требуется:
Ваш собственный 4-канальный TX / RX
Батарея 1300mAh 3s LiPoly

Product
Specifications

Дополнительная информация

  • Артикул:
    TigerM-Y-PNP
  • Brand:
    Не применимо
  • Емкость ( мАч )
    Нет
  • Вес ( г )
    1870.00
  • длина:
    965.00
  • ширина:
    120.00
  • Высота
    305.00
Community
Discussions
Rate&
Review

Напишите ваш собственный отзыв

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
had my tiger moth yesterday looks good after a respray started the motor for a test run the rudder fell off fixed that next thing I tested was the ailerons one worked the one on the right had a funny turn and stopped working! had to replace the servo Hopefully when the weather get better I may be able to fly it
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Got my 912 mm yellow Tiger Moth 2 weeks ago started it today and finished 4 hours latter with help from my 12 year old. The kit had everything in the box less glues and tools it did have many of the issues other people have experienced. Fuselage not glued correctly tailskid broken away form the foam. However this is not a kit with a high premium and the issues are easy to sort out if you have built a few aircraft before. The build sequence is a little off in my opinion nothing really to grumble over and its really obvious. The hardware is cheap but functional and the servos worked fine. It has built into a really nice little model and the flying wires are well worth the effort. When finished it came out 100grams over the declared flying weight my only real criticism is, there is no mention of the flying control range of movements. Im going to go full range and dial in 50pcnt exponential unless some one has got a better idea. In summary cheap as chips and looks a lot better than it should and really easy build if you have any experience if not stay clear and start on something simpler.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Well this plane has one definite fault that I warn you all to check before you fly it! The engine can easily come right off during flight! Yes you heard right "The engine can come right off during flight"! This is what took me from flying a rather nice moth, to sheer crashed and broken frustration! All because I forgot to Pre thread lock the engine mount screws prior to flying! I really stress don't go through the grief I encountered! The staff that installed the motor to the cowl have not done the engine mount screws up tight enough and/or have not appllied any thread lock to the engine screws! In fact (not just for this model) it's a good idea to do this with any electric model you purchase! Never trust the engine mount screws until you've tightened and Pre thread locked them thoroughly yourself! So is say DO yourself a massive favor (when you buy this nice value for cash model) and unscrew the engine mount screws and apply some Loc-Tight thread locker to the screws that lock the motor to the wooden cowl! Other than this I'm buying another (due to the value and no other faults) and this time round I'm definitely Pre- Thread locking the engine screws! It was such a good plane to fly until this unfortunate event happened! So remember what i'm saying here is very Important!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Is it normal to add nearly 8.0 oz to properly balance a plane? Beautiful model with plenty of power and now I have to ugly it up with half a pound of weights to get level flight. You would think that "for the money" it would be engineered a little better than that. Lower wing very thin at the worst possible point and very easy to break on a rough landing. Doubt I'll get another.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I received my tiggy today, 4 shipping days after ordering it. Packaging was totally undamaged. All parts in good repair with and excellent finish. My only worry is that the lower wing is rather flimsy at the roots. Thinking about adding some carbon fiber spars. Will try a stock assembly and first flight as soon as the weather turns. February in Kentucky is rather windy. First impressions are good and for the price I doubt this model can be beat.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
recieved prompt delivery of a well packed little plane from Aus warehouse. All looked good but for the warp in lower wing, i intended to strengthen with CF rod anyway so will straighten then.
otherwise happy with purchase.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Arrived packed in plain cardboard outer box, undamaged. Opened and plain cardboard box inside with no illustrations of finished model. Opened that and there was the kit of parts, more of a 'park flyer' size than I was expecting but that's ok. One problem was that the tailskid was partly broken off the fuselage so some repair needed. I will add reinforcing at that area anyway. Also found no instructions in the box, assume there should be? Still, a simple model to build so with all the parts laid out should not be too much trouble to assemble. A tube of glue is supplied in the kit, and rigging wire which I probably will not use. Oh, also it says 'RAF' markings but as the pic on the website shows, and I knew anyway, it is actually Australian markings. On the back burner at the moment, may do some 'touching up' on the finished model. It could also do with a scale pilot to fill one of the cockpits. All in all a good basic model, and I do have a spare 'park flyer' rx doing nothing.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
hi have just recieved this loverly scale model and I was verey pleased to see it is modeled on a Australian aircraft Hobby King you have done a great job with this modeldetail is verey good and only a fool would think other wise I have bought many models from hobby king and I am pleased with the aircraft I have bought

as I could not aforde to buy whate i have got know I can not wait to build her and add personal touches and can't waite to fly her

thanks againe H/K bloody good job
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Very nice little biplane for the money - flys extremely well although mine needed a bit more weight up front to stop it pitching up all the time, otherwise it's a thumbs up from me, - might buy the blue variant when it's back in stock as this plane is an ideal size to chuck in the car and go for a quick fly before the wife gets home and starts handing jobs out!!!!!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
After owning this for a while now, I thought I would give some more feedback, this flies much better with quite a bit of down and right thrust by using some plastic under motor corner. The difference is quite amazing and I am much happier now, b4 when I opened throttle full nose would come up and almost stall and pull hard to left when trimmed out at half throttle and when turn throttle off would dive to the right. This should really have been built into fire wall but as it's not BE WARNED and add the thrust lines and you will get a much nicer flier.
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
  • Hobbyking DH Tiger Moth RAF 912mm

Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Метки товара

Используйте пробелы для отделения меток. Используйте одинарные кавычки (') для фраз.