New Items ФОРУМ
Зарегистрируйтесь

Итоговая цена

0,00 руб.

Cart 0 Cart 0 Loading...

Hobbyking Край 540 V3 (красный / белый) 3D 1200mm (ARF)

Hobbyking Край 540 V3 (красный / белый) 3D 1200mm (ARF)

Discontinued Product

Please continue searching for a similar product.
WANT FREE SHIPPING? Click here to find out more!

Край 540 V3 должен быть одним из наиболее перспективных гоночных и производительности самолеты когда-либо построенных, но не обольщайтесь, Hobbyking Край был разработан с одной вещью в виду, экстремальных 3D пилотажа!

Качество этого края просто так хорошо, как он получает, планер был построен, чтобы сохранить полетный вес минимальной, но достаточно сильны, чтобы взять на себя наказание крайних фигур высшего пилотажа, превосходное качество покрытия было умело применять и для последнего штриха, обтекатель, сени и колеса брюки закончили в глубоком глянцевой краской. Аппаратные средства отлично и также решили сохранить полетный вес до абсолютного минимума и, конечно, модели функции плагина в крыло и CF крыла трубки, как можно было бы ожидать для удобства транспортировки.

H-King Край 540 V3 выполняет каждый дюйм, как хорошо, как она выглядит, naturaly это делает для большой спортивной плоскости, но было бы справедливо сказать, что хардкор 3D является то, что край был разработан. Точность планера, потрясающий внешний вид, верхнее качество линии и удивительный вес пера спецификации сделать край 540 V3 должен иметь самолет для всех пилотажных и 3D пилотов!

Особенности:
Удивительный внешний вид
Топ качество строительства и покрытие
Легко и быстро строить
Ультра легкий вес, но сильный планера
Superbly законченный
Потрясающие 3D возможности
Узел Быстрый поле, легко транспортировать

Технические характеристики:
Размах: 1200мм
Длина: 1180MM
Площадь крыла: 28.9dm2
Сухой вес: 729g (включая все оборудование)
Полетный вес: 1300g ~ 1500g (приблизительно)

Требуется:
Ваш собственный 4 ~ 6-канальный TX / RX
35mm Brushless Походный Мотор
40A ~ 50A ESC
4-кратный цифровой высокий крутящий момент 9g ~ 12g серво
Батарея 2200mAh ~ 3300mAh 3s LiPoly
50мм Spinner
UBEC (Необязательно)

  • Артикул 049000003
  • Brand HobbyKing
  • Емкость ( мАч ) -
  • вес 3105.0000
  • длина 980.00
  • Packaging Width 190.00
  • Высота 415.00
  • Edge 540 V3 30cc
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Fatal Flaw....
This airplane flies really good BUT the horizontal stabilizer has lightening holes drilled in the center. It is also constructed with 2 halves (right and left) with a perpendicular glue joint right in the middle. It will break in the middle and cause a severe crash. It is just poorly designed and will fail. It just happened to me today. In order to eliminate this structural design flaw. throw away the stab that comes with it and make a new one from a single piece of 3/16' balsa. Cut slots of hinges and hinge the elevator. HobbyKing should make this modification immediately as it is one very good flying airplane if you can keep the stabilizer in one piece!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Fatal Flaw....
This airplane flies really good BUT the horizontal stabilizer has lightening holes drilled in the center. It is also constructed with 2 halves (right and left) with a perpendicular glue joint right in the middle. It will break in the middle and cause a severe crash. It is just poorly designed and will fail. It just happened to me today. In order to eliminate this structural design flaw. throw away the stab that comes with it and make a new one from a single piece of 3/16' balsa. Cut slots of hinges and hinge the elevator. HobbyKing should make this modification immediately as it is one very good flying airplane if you can keep the stabilizer in one piece!

perfct plane very nice flight Amazing 3d experience very very very good

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

perfct plane very nice flight Amazing 3d experience very very very good

Excellent model, Beautiful and responsive. I used Motor PropDrive 3542-1000KV with ESC HobbyKing 50A and Prop APC 12x6E, Please refer to my YouTube published at:
http://youtu.be/s50XCFsyeBo
Thank you HobbyKing.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Excellent model, Beautiful and responsive. I used Motor PropDrive 3542-1000KV with ESC HobbyKing 50A and Prop APC 12x6E, Please refer to my YouTube published at:
http://youtu.be/s50XCFsyeBo
Thank you HobbyKing.

Not happy. Yes, the plane looks nice and everything, but after less than two minutes of flying, whilst still trimming out, the right hand rear horizontal stabiliser completely snapped off taking the RH elevator with it. Luckily, I was able to make an emergency landing with minimal damage to the undercarraige. However, this may not have been possible had I been performing a 3D manoeuvre such as the plane is advertised! On inspection, the rear stabiliser is constructed of lightweight balsa (as is the rest of the plane) with the woodgrain running in line with the fuselage. It was an accident waiting to happen. Other purchasers have had exactly the same experience and Hobbyking has failed to address the issue. Looks great. But as a "plane" it fails. As a 3D plane it has a serious design flaw and is not fit for purpose. "Quality as good as it gets" does not instill much confidence for further purchases.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Not happy. Yes, the plane looks nice and everything, but after less than two minutes of flying, whilst still trimming out, the right hand rear horizontal stabiliser completely snapped off taking the RH elevator with it. Luckily, I was able to make an emergency landing with minimal damage to the undercarraige. However, this may not have been possible had I been performing a 3D manoeuvre such as the plane is advertised! On inspection, the rear stabiliser is constructed of lightweight balsa (as is the rest of the plane) with the woodgrain running in line with the fuselage. It was an accident waiting to happen. Other purchasers have had exactly the same experience and Hobbyking has failed to address the issue. Looks great. But as a "plane" it fails. As a 3D plane it has a serious design flaw and is not fit for purpose. "Quality as good as it gets" does not instill much confidence for further purchases.

top airplane & good value . Had 4 good fly's just the covering coming off in 1 spot my set up is e-flit 15 brushless outrunner Dualsky xc 60 amp emp , 11.7" emp prop & trningy 3s 2200 the setup is a little over kill but can be used in a bigger plan down the track . Flying around 1/2 throttle about 10 minute's no heat at all if you are mad you could go for a 12.7 " prop have fun

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

top airplane & good value . Had 4 good fly's just the covering coming off in 1 spot my set up is e-flit 15 brushless outrunner Dualsky xc 60 amp emp , 11.7" emp prop & trningy 3s 2200 the setup is a little over kill but can be used in a bigger plan down the track . Flying around 1/2 throttle about 10 minute's no heat at all if you are mad you could go for a 12.7 " prop have fun

I bought this and collected it from the UK warehouse, to fit my GPS unit to. Didn't read other reviews, consequently on the first turn into wind on a windy day the RHS tail-plane c/w elevator fluttered to the ground ! I managed to land it with no other damage, don't know how! Fitted the complete tail-plane ass'y from my old Yak and braced it up with closed-loop wire. Never looked back, except for the papier-mache tail-plane this is a superb model. I did also put lots of epoxy round the undercarriage plate and firewall, it is an ARF after all!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I bought this and collected it from the UK warehouse, to fit my GPS unit to. Didn't read other reviews, consequently on the first turn into wind on a windy day the RHS tail-plane c/w elevator fluttered to the ground ! I managed to land it with no other damage, don't know how! Fitted the complete tail-plane ass'y from my old Yak and braced it up with closed-loop wire. Never looked back, except for the papier-mache tail-plane this is a superb model. I did also put lots of epoxy round the undercarriage plate and firewall, it is an ARF after all!

A very good aircraft. Good lightweight and strong airframe. My Edge 540 take of weight is 1400g on the spot with 3542 size 1000 kv, 55A ESC and 3200mAh 3s lipo.
Reinforcement of the elevator recommended with 3mm carbon strip. Also Crimp tubes were missing in my edge, so get those just in case.
CG just 10mm behind carbon spar gives good 3D flying experience.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

A very good aircraft. Good lightweight and strong airframe. My Edge 540 take of weight is 1400g on the spot with 3542 size 1000 kv, 55A ESC and 3200mAh 3s lipo.
Reinforcement of the elevator recommended with 3mm carbon strip. Also Crimp tubes were missing in my edge, so get those just in case.
CG just 10mm behind carbon spar gives good 3D flying experience.

This version is discounted because the colored shrink film is defective.
Mine arrived with several issues on colored shrink film that peels off
See also thies review:http://www.rcgroups.com/forums/showthread.php?t=1584272&page=17

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This version is discounted because the colored shrink film is defective.
Mine arrived with several issues on colored shrink film that peels off
See also thies review:http://www.rcgroups.com/forums/showthread.php?t=1584272&page=17

An beautiful plane. Superb quality finish. Well packed. Amazing value.

I have not yet flown it as am waiting for some minor parts but will need to handle the controls with extreme caution as this plane has huge control surfaces - scary.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

An beautiful plane. Superb quality finish. Well packed. Amazing value.

I have not yet flown it as am waiting for some minor parts but will need to handle the controls with extreme caution as this plane has huge control surfaces - scary.

It is absultely very easy to assemble. Can be flight ready in just 4-6 h. The control surfaces are big but the supplied cyano hinges are very small so I had to change them with bigger ones. The control horns according to me are not trusworthy so I changed the control horns as well. Servo spaces are not for mini servos but for micros only so if you want to use more powerful ones you will have some trouble to open more space for a mini servo.
The workmanship is of decent quality and the plane is very light weighted.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

It is absultely very easy to assemble. Can be flight ready in just 4-6 h. The control surfaces are big but the supplied cyano hinges are very small so I had to change them with bigger ones. The control horns according to me are not trusworthy so I changed the control horns as well. Servo spaces are not for mini servos but for micros only so if you want to use more powerful ones you will have some trouble to open more space for a mini servo.
The workmanship is of decent quality and the plane is very light weighted.

  1. 1
  2. 2
  3. 3
Customer files
Fix for the stab problem Download [1369]
Stab fix Download [94]
Stab fix Download [59]
543748428X1125850X2.png Download [251]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save