Зарегистрируйтесь

Product Finder

Настройки

Useful links

Живой чат
 
[["US","AU","GB","DE"]]
Зарегистрируйтесь

HobbyKing Multi-Rotor Control Board V2.1 (Atmega168PA)

HobbyKing Multi-Rotor Control Board V2.1 (Atmega168PA)

Discontinued Product

Please continue searching for a similar product.
Stock:
OUT OF STOCK
Вес:
99 g
Артикул:
QUAD-CON16K
Описание
товара

На основе и построен в сочетании с оригинальным QUADBoard дизайнером Рольфом и популярной и уже хорошо поддерживается борту КК управления, плата управления Hobbyking Multi-Ротор приносит Quadcopter безумие к массам с его прорывы по качеству и цене!

Плата управления HobbyKing Multi-Rotor использует японские пьезо гироскопы Murata, которые менее чувствительны к вибрации, чем гироскопы типа SMD, а также особенности состояния производства искусства SMT для обеспечения качества. Эта плата также использует программируемые пользователем Atmega168PA IC.

Спекуляции.
Размер: 50.5mm х 50.5mm х 23.5mm
Вес: 14,5 грамм
IC: Atmega168PA
Гироскоп: Murata Piezo
Входное напряжение: 3.3-5.5V
Сигнал от приемника: 1520us (4 канала)
Сигнал ESC: 1520us


Что представляет собой плату Multi-управление ротора вы спрашиваете?

Контроллер HobbyKing Multi-Ротор представляет собой плату управления полетом для 4 ротора воздушных судов (Quadcopters). Его цель состоит в том, чтобы стабилизировать самолет во время полета. Для этого он принимает сигнал от трех гироскопов на борту (крен, тангаж и рыскания) затем передает сигнал на Atmega168PA IC. Блок Atmega168PA IC затем обрабатывает эти сигналы в соответствии с установленным программным обеспечением пользователей и передает управляющие сигналы на установленных электронных регуляторов скорости (ЭСК). Эти сигналы проинструктировать ESCs сделать точную регулировку двигателей числа оборотов, которые в свою очередь, стабилизирует Quadcopter.

Плата управления HobbyKing Multi-Rotor также использует сигналы от Вашего радиосистем приемника (Rx) и передает эти сигналы в Atmega168PA IC через Айыл, Эле, Чет и РУД входов. После того, как эта информация была обработана IC будет посылать сигналы изменения к ЭСК, которые в свою очередь, регулируют скорость вращения каждого двигателя, чтобы вызвать управляемый полет (вверх, вниз, назад, вперед, влево, вправо, рыскание).

Примечание: руководство пользователя доступно на вкладке файлов.
* Лицензионные, выплачиваемого по каждой единице Рольфу, оригинальный KK Board Designer.

Product
Specifications

Дополнительная информация

  • Артикул:
    QUAD-CON16K
  • Brand:
    HobbyKing
  • Вес ( г )
    99.00
  • длина
    75.00
  • ширина:
    35.00
  • Высота:
    75.00
Community
Discussions
Rate&
Review

Напишите ваш собственный отзыв

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
I would not get this board if your new to Quads, its quite fiddly to setup and I found it quite difficult to control my quad. It has no self levelling so avoid unless you like pure manual flying.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Very good product, would definitely recommend, this to a beginner getting into the hobby as it needs no programing and it is easy to set up using its 3 potentiometers on the board. It is also cheap and very stable in flight.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I bought this board because the kkboards with the LCD displays were on backorder or in transit in the europe store.

I have been trying to get this working for days.. different firmware, orientation changes X and configurations, gyro stablisation. I got the quad working on configuration stable but it was leaning forward all the time.. it was trimming hell and the fact that there is no visual indication of what is happening is not recommended for the beginner. I have gotten the quad to lift in X mode after I switched from mode (also changing the boards orientation).

This board might go in the garbage bin
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Good board!Good board!Good board!Good board!Good board!Good board!Good board!Good board!Good board!Good board!Good board!Good board!Good board!Good board!Good board!Good board!Good board!Good board!Good board!Good board!Good board!Good board!Good board!Good board!Good board!Good board!Good board!Good board!Good board!Good board!Good board!Good board!Good board!Good board!Good board!Good board!Good board!Good board!Good board!Good board!Good board!Good board!Good board!Good board!Good board!Good board!Good board!Good board!Good board!Good board!Good board!Good board!Good board!Good board!Good board!Good board!Good board!Good board!Good board!Good board!Good board!Good board!Good board!Good board!Good board!Good board!Good board!Good board!Good board!Good board!Good board!Good board!Good board!Good board!Good board!Good board!Good board!Good board!Good board!Good board!Good board!Good board!Good board!Good board!Good board!Good board!Good board!Good board!Good board!Good board!Good board!Good board!Good board!Good board!Good board!Good board!Good board!Good board!Good board!Good board!Good board!Good board!Good board!Good board!Good board!Good board!Good board!Good board!Good board!Good board!Good board!Good board!Good board!Good board!Good board!Good board!Good board!Good board!Good board!Good board!Good board!Good board!Good board!Good board!Good board!Good board!Good board!Good board!Good board!Good board!Good board!Good board!Good board!Good board!Good board!Good board!Good
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I bought one. How do I find out what software config. it has? is it a H or an X for quadcopter? Can I know this without using an programming cable? Thank you!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Based on another review here I learned that the gain pots are reversed. After dialing in some more gain it's flying much better. I was running just under what I thought was 50pcnt before. Anytime I tried going "higher" it started to get uncontrollable. Now I've been slowly working the gain up (what I thought was down) and getting good results. The other thing I learned was that the gyros tend to drift after they warm up a bit. You can reset them by disarming then rearming the board (left stick to lower left to disarm, then to lower right to arm again). I generally have to do this about 2 minutes into the flight, then it seems pretty stable after that.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
It is incredible how this simple board performs so well. It may not have the best gyros in the word, and LCD or an ACC, but the truth is that it is very stable and easy to tune in the field. Not just good value for the money, but simply good value.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
The best quality/price controller and certainly the best controller with only gyros (no accelerometers).
You will greatly improve it with the 4.7original version of Kaptein kuk.
Just by an USBasp interface, install KKflashtools and choose the version you want, or X and 4.7version for quadcopter. Many others configurations are available except octocopter (just 6 esc outputs)

Original soft, is not very good and could let you think you are a bad pilot or KK board is not very good. It works for quadcopter but it's hard to keep it in place. 4.7 version include P and I control, it's not exactly a return to flat position, but corrections against wind, makes quad return very close and fastly to original position. With 4.7 version, yaw becomes very precise, faster and locked.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Great 5 star product. Fantastic item I use them all the time. Nice and shiny, works as advertised in all kinds of setups.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Fantastic 5 star product, nice and shiny. Came well boxed in a plastic bag. Will buy more soon if needed.
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
  • Xcopter Scratch Built Stable Quadcopter

Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Customer files
Manual download now [449kb]
Manual em português download now [691kb]
Motrax x copter download now [1028kb]
KK Multicopter Manual download now [883kb]
117138067X82100X9.pdf download now [449kb]
117138067X82100X31.pdf download now [449kb]
XXcontrol KR Setting Manual download now [1152kb]
Correct programmer connection download now [2444kb]
Небольшой обзор на Ñ€ÑƒÑ download now [24kb]
MANUAL ESPAÑOL download now [42kb]
Manuel mise en route en français download now [450kb]
No File Name download now [2kb]
manual download now [449kb]
Multi-Rotor FC HK V2.1 FR download now [238kb]
plane download now [22kb]
Open Aero diagram download now [152kb]
Flashing your Multicopter Controller Boa download now [1973kb]
HK MRC V2.1 manual download now [449kb]
Quadcopter Control Board Manual Rus v2 download now [460kb]
Manual in PDF download now [449kb]
Manual Rus download now [488kb]
Manual download now [449kb]
pic18f4550 download now [6988kb]
Tricopter Suomi download now [194kb]
X4 Suomi download now [198kb]
Y6 Suomi download now [171kb]
HefnyCopter Firmware download now [564kb]
conected to the recever download now [1117kb]
evry thing was broken but the board was download now [501kb]
at night they comme download now [151kb]
설명서 download now [1662kb]
펌업 설명서-한글 download now [785kb]
Atmega 168 PA download now [103kb]
ESC in Body-Colin download now [252kb]
No File Name download now [1250kb]
Colin's Quad Problem2 download now [1824kb]
Colin's controller board download now [1250kb]
KKmulticopter.Flash.Tool.&.Docs.txt download now [0kb]
HK FC V2.1 download now [449kb]
Board Corrosion?? download now [131kb]
No File Name download now [131kb]

Метки товара

Используйте пробелы для отделения меток. Используйте одинарные кавычки (') для фраз.