HobbyKing Spec FPV250 V2 Дрон ARF Combo Kit - Mini Размерный FPV Дрон (АРФ)

So Far so good. Built the other day and test flown within an hour.. Flight times with the 1000 mAH battery are roughly 7-8 mins with Carbon Props and 8-9 Mins with an 1100 mAH Battery from RMRC.. So much more responsive then my bigger quad. Decided on a regular KK over the mini KK I already have, but overall its a good flying quad and very strong. I haven't tried the supplied 3 blade props, I bought a ton of Gemfan 5x3 carbon Props and ABS Props from RMRC.. Just wish there was a way to hide more of the wiring, especially the wiring for the ECS's to Battery connector... Thinking of some small stand offs for the KK board and hiding it all under there?!?!?

This is my first quad build and it went without a hitch! It was super fun and easy to do once I looked at all the documents and web videos. It flies great - I'm truly amazed. Only thing I would improve is the landing legs because they do not stay in so I had to apply some CA glue. Value is great as well. Nice job Hobbyking!!

Very good starting racer kit. Easy to build, fly with kk2.1.5 like a charm. Perfect first quad. Here is mine: https://youtu.be/1CF88N-6WWw

pro:

easy setup

flies really stable with kk 2.1.5

components work together really well - no real heat at the motors or esc's

contra:

one propeller was broken, right after first moving the propeller but without proper settings of the kk 2.1.5

Nice combo kit for beginners. Easy to build. Possible upgrade.

Love it, very good en sturdy construction. Wan't brake, even not at heavy crashes. Props are cheap and weak, bought some carbon 2 blade props and now it runs perfect, stable en is FAST :-)
The feet have to be glued to the frame, otherwise you will lose them.
Use it in combination with a KK2.1.5 board, latest firmware update. Don't forget to order the servo leads as these are not included.
Also ordered the USB linker to update the firmware on the ESC's, nice and easy, makes a difference

i had a mini kk2.1.5 that i stuck in this and the controller cage really doesn't like it to much. The build was really easy. Don't use the motor mount brackets just use the 2x10mm bolts and washers directly through the frame into the motors. It flies perfect and its got A TON of power. With bare essentials (kk2.1.5 mini, FS receiver, 1000mah 3s, motors , esc's) it bounces around 40pcnt throttle and gets airborne around 46pcnt. Hover from 44-46pcnt. With that setup and easy self leveling round and round flight in my kitchen to test everything out i got a little over 8 minutes of flight.

Absolutely recommend this kit for sure.

very nice quad, easy to build and fun to fly, just use some better propellers ;)

I bought this as a hassle free way to build a quadcopter, And I have to say that it's pretty much fit the bill perfectly.
It only comes with one set of blades (And 2 of mine didn't survive long enough to get outside !!! :) ), So it's worth loading up your order with a load of spare sets when you buy it. I got 3 spare sets at the time and I think that wasn't really enough !
Also, The plain M5 prop nuts are all standard threading, (Not CW and CCW) so it would be a good idea to source a bag of nyloc nuts to replace any that disappear into the scenery in a crash as clipping something with the blades that are spinning clockwise will whizz the nut right off.
The frames bl00dy strong and the kits made up with some pretty good parts. All in all, I'm glad I bought it.

Great little kit, quality parts and around $82, recommended to anyone starting out, just remember to get a couple more sets of propellers, another battery or 2 and a flight controller.

Also consider the upgrade kit for more space and mounting options.