New Items ФОРУМ
Зарегистрируйтесь

Итоговая цена

0,00 руб.

Cart 0 Cart 0 Loading...

HobbyKing X-1000 Advanced Head-Движение-трекер Гироскоп

HobbyKing X-1000 Advanced Head-Движение-трекер Гироскоп

Shipped From:
  • Global
QTY:

Now save сэкономь 0,00 руб. 0,00 руб.

3 217,09 руб.
Статус:
Есть в наличии
Вес:
125 g
SKU:
HKX-1000
WANT FREE SHIPPING? Click here to find out more!
X-GYRO 1000 является две оси головы система слежения, основанная на технологии датчика G, предназначенный для отслеживания сложных трехмерного движения как движения головы и так далее, она также может быть использован на участках управления беспилотных летательных аппаратов и роботов, передавая три- трехмерные сигналы движения от рук, глава человека к соответствующей системы движения на RC модели, гула или робота.
Базовая версия X-гироскопом 1000 разработан специально для радиоуправляемых моделей с FPV (Первая персональная версия), она может быть использована совершенно с основными передатчиками потока или будут совместно работать с беспроводной высокочастотной модульной независимо друг от друга. Он может передавать сигналы движения на передатчик, и передатчик может посылать сигналы движения головы или положения головы (на две оси), так что реальная синхронизация может быть реализована , когда экран на очки , отображаемых видео изображений, пользователи могут смотреть вокруг как если бы он был внутри модели RC. Поскольку он совместим с передатчиками на сегодняшнем рынке, легко и прямо вперед в использовании. Его лучшее преимущество заключается в том, что нет никакой необходимости иметь какой-либо фиксированный эталонный объект для проверки и измерения положения инфлекционного модели RC, и отсутствие дрейфа на всех, когда она находится в стационарном состоянии по сравнению с другими продуктами, которые необходимо использовать очень сложный ссылки на объекты или передатчики ручные контролируются.

Характеристики:

Питание: 8V к источнику питания 12 В постоянного тока. Некоторые
передатчики, особенно те из них, FUTABA может подавать питание непосредственно тренера
разъем. (Напр. T9Z, FF9C). Некоторые передатчики не может служить источником питания для X-гироскопом, для
Пример 14MZ и 12FG. Самое простое решение заключается в использовании дополнительной батареи для этих передатчиков RC. Разъем уже включен в пакет.
Размер: 25mmX35mm
Вес: 20 г
Диапазон измерения: + -90 градусов / второго вращательного движения скорости.

Настройки по умолчанию:

Каналы: X ось- канал 7 Y оси канала 8
Детектив степень G45 Диапазон

Выбор для передатчиков;
FUTABA:
(FF-7, FF-8, FF-9, T9Z, T12MZ, T14MZ)
Graupner: (MC20, MC24, MX22)
Мультиплекс передатчик: (Royal Эво, кокпит SX, mc4000)
JR и другие передатчики без программируемого канала: (9303, 9X)
  • Артикул HKX-1000
  • Brand HobbyKing
  • Емкость ( мАч ) -
  • Вес ( г ) 125.00
  • длина 188.00
  • Width 18.00
  • Высота 99.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

not impressed with the tracking capability of this unit. add a 3 axis Accelerometer and Magnetometer. and you might have something worth buying.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

not impressed with the tracking capability of this unit. add a 3 axis Accelerometer and Magnetometer. and you might have something worth buying.

When trying to use with the 9XR and Futaba plug, you have 2 choices solder some wires and hope, or the following. The Futaba plug has 2 ppm wires JR only uses one (HT only uses one) so simply open the radio, unplug harness for Futaba plug (right side) and unplug the JR plug (left side) and plug the Futaba port into that socket. This allows the HT to work with no soldering and no change in settings minus adding the PPM signals to the right channels. Other then that seems to work great and no issues on my Bix3.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

When trying to use with the 9XR and Futaba plug, you have 2 choices solder some wires and hope, or the following. The Futaba plug has 2 ppm wires JR only uses one (HT only uses one) so simply open the radio, unplug harness for Futaba plug (right side) and unplug the JR plug (left side) and plug the Futaba port into that socket. This allows the HT to work with no soldering and no change in settings minus adding the PPM signals to the right channels. Other then that seems to work great and no issues on my Bix3.

Good little unit. Naturally I had to hack it... I pulled it out of the case and found that it would fin inside the tiny air space of a FatShark Predator V2 goggle. Added a 3.5mm jack and wired up the switch and glued it in place and Voila... a Predator goggle with built in head tracker. Works perfectly.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Good little unit. Naturally I had to hack it... I pulled it out of the case and found that it would fin inside the tiny air space of a FatShark Predator V2 goggle. Added a 3.5mm jack and wired up the switch and glued it in place and Voila... a Predator goggle with built in head tracker. Works perfectly.

, , . .

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

, , . .

This head tracker drifts very badly, it is fairly useless as you will be resetting the center every 10 seconds literally!
it is not worth a purchase

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This head tracker drifts very badly, it is fairly useless as you will be resetting the center every 10 seconds literally!
it is not worth a purchase

Got this up and running with the FrSky Taranis. The Taranis is a great match for the gyro, as it's got plenty of programming possibilities. It did require some soldering of a JR-style trainer connector, however not on a too difficult level.

For all those asking "does this work with radio X", check if your radio can assign custom channels to the trainer connector. If that's the case, it will work for your radio, but may require some soldering work. The two connectors shipped with the unit fit the 6-pin square connector and 6-pin large DIN which both are for Futaba radios.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Got this up and running with the FrSky Taranis. The Taranis is a great match for the gyro, as it's got plenty of programming possibilities. It did require some soldering of a JR-style trainer connector, however not on a too difficult level.

For all those asking "does this work with radio X", check if your radio can assign custom channels to the trainer connector. If that's the case, it will work for your radio, but may require some soldering work. The two connectors shipped with the unit fit the 6-pin square connector and 6-pin large DIN which both are for Futaba radios.

I got one a while back, works with Hitec Eclipse 7 (72mhz) But now I use it with my Turnigy 9x (2,4ghz) You will need to re-locate the reset button to the transmitter because the drift is really annoying and you will be constantly resetting it. I wasn't impressed. I have the round connector spare if anyones interested. RC Groups - Headspin

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I got one a while back, works with Hitec Eclipse 7 (72mhz) But now I use it with my Turnigy 9x (2,4ghz) You will need to re-locate the reset button to the transmitter because the drift is really annoying and you will be constantly resetting it. I wasn't impressed. I have the round connector spare if anyones interested. RC Groups - Headspin

Good headtracker but nothing is perfect.

Works perfect with my T9x

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Good headtracker but nothing is perfect.

Works perfect with my T9x

My gyro is drifting so much on one of the channels that it make it useless, I can only use it as a one axis gyro.
The soldering inside the gyro was very badly made with damage on the connectors.
The same thing in the Futaba trainer plug.
The reset switch is glued inside the plastic case. The same thing with the circuit board, it is only fixated in glue inside the plastic case.
I would not recommend this product.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

My gyro is drifting so much on one of the channels that it make it useless, I can only use it as a one axis gyro.
The soldering inside the gyro was very badly made with damage on the connectors.
The same thing in the Futaba trainer plug.
The reset switch is glued inside the plastic case. The same thing with the circuit board, it is only fixated in glue inside the plastic case.
I would not recommend this product.

, , , . .
Very poor quality gyros, the center is constantly going.
http://www.youtube.com/watch?v=I4z1UuUvgeI&list=UUcHik9X4FBffiInQk1LAnlw&index=1&feature=plcp&noredirect=1

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

, , , . .
Very poor quality gyros, the center is constantly going.
http://www.youtube.com/watch?v=I4z1UuUvgeI&list=UUcHik9X4FBffiInQk1LAnlw&index=1&feature=plcp&noredirect=1

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6
Customer files
XGY-1000 headtracker Download [216]
radio Multiplex & X-Gyro Download [57]
RC Transmitter PIN Settings Download [3222]
Head Tracker to Graupner MC24 Download [684]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save