Стать поставщиком Блог Новинки
Зарегистрируйтесь

Итоговая цена

0,00 A$

Корзина 0 Корзина 0 Loading...

HobbyKing X900 Tricopter Стекловолокно Multi-Rotor Рама

Generating Links

HobbyKing X900 Tricopter Стекловолокно Multi-Rotor Рама

Цена:

Now save сохранить 0,00 A$ 0,00 A$

58,16 A$
Уже купили Discontinued Product

Please continue searching for a similar product.
Артикул:
9171000157
Хотите бесплатную доставку? кликните сюда Узнать больше!

Разработанный с нуля до нашей собственной инженерной команды, X900 Tricopter является кульминацией месяцев проектирования, тестирования и поиске материалов, чтобы предоставить вам идеальное сочетание качества, производительности и стоимости. Рама X900 Tricopter является Hobbyking исключительное значение вы не найдете больше нигде!

X900 имеет очень красиво закончили стекловолокна основной рамы, амортизирующие посадки ноги и складные алюминиевые руки. Амортизирующие посадки ноги отличная возможность для обработки этих грубых посадок, что мы все время от времени.

Интегрированный сервопривод хвост крепление изготовлен из стекловолокна, а также, что позволяет монтировать ваш любимый микро / мини хвост сервопривод для управления рыскания. Задний крепление двигателя поворачивается на двойной шариковый подшипник вала поддерживается обеспечивая супер плавное и точное движение. В результате, управление рыскания блокируется в и очень точным во время полета.

Мы предлагаем полную линейку мульти-ротор электроники, таких как платы мульти-ротор управления, ESC, двигатели и многое другое, так что никогда не было проще и более доступным, чтобы получить ваш кадр мульти-ротор в воздухе!

Все необходимое оборудование включено. Просто добавьте свои собственные электронику.

Технические характеристики:
Передний рычаг Длины: 420мм (основания стрелы до центра вращения вала двигателя)
Задний Длина рукоятки: 450mm (основания стрелы до центра вращения вала двигателя)
Отверстия под болты двигателя: 16/19 / 25мм
Рама Вес: 385г (ж / из электроники)

Необходимые:
28-XX или 35-XX бесщеточный скороход двигатель х 3
25 ~ 40A Brushless ESC х 3
Высокая скорость микро / мини серво для хвоста (цифровой сервопривод рекомендуется)
10 ~ 12 дюймов пропеллер (2 стандартное вращение / 1 назад)
плата управления Multi-ротор
2650 ~ 3300mAh 11.1V LiPoly
4CH передатчик и приемник

  • HK X900 Glass Fiber Tricopter
  • HK X900 Tricopter with NTM Prop Drive 28-26 1000KV motors
  • tricopter led upgrade
  • tricopter first fly
Загрузить видео

Для загрузки видео необходима регистрация войти в систему или Зарегистрируйтесь

Темы
Сортировать по
Самые последние темы
* Псевдоним пользователя:

* Ваш ответ:


Пожалуйста, введите текст, показанный на картинке, в поле ниже
*Код верификации:
Отменить
Отправить
Опубликовать новую тему
* Псевдоним пользователя:

* Ваша тема:



Пожалуйста, введите текст, показанный на картинке, в поле ниже
*Код верификации:
Опубликовать тему

Для того, чтобы оставлять отзывы, необходимо зарегистрироваться войти в систему или Зарегистрируйтесь

Chris | Проверенный покупатель

  • Overall
  • Quality
  • Value

Great frame

Jan 19, 2020

One of the best tricopter frames (and one of the few) on the market. Only issue I had was the directions. They were a bit hard to decipher and not very discriptive but the pictures were a good help.

Scott | Проверенный покупатель

  • Overall
  • Quality
  • Value

OK for the price.

Jan 17, 2018

Bought this as a base for a folding Y6 rebuild of my hexacopter camera platform. I've already made 4 more motor mounts by cutting down a set of spare 4mm carbon arms I had for a 250 frame. It looked like it was going to be a good starting point for this project, But since actually having it in my hands it looks like I'm going to have to rethink a fair bit of the kit. The rear of the frame is too narrow to fit my cam/undercarriage rail mounts. I could bolt on an inch wide alloy or carbon strip to mount the rear clamps, But I think it would be a better option to just make a wider replacment carbon bottom plate using the original as a template. And while I'm at it I could do with some more headroom to fit the electronics inside, So the easiest option may be to get some 10x20mm alloy box section and remake the arms). By the time I'm finished there may not be much of this kit left. :)
As the kit arived it seems OK, Not the last word in quality, But if you were just going to run it as a tricopter and strap a statically mounted Gopro to the front I think it would be a pretty nice toy. My problems are only surfacing because I'm not intending to do that.

albert | Проверенный покупатель

  • Overall
  • Quality
  • Value

Customer Rated

Jul 23, 2016

This is a great tricopter for the price. The only issue i had was the tilt mechanism. It isnt the best design right out of the box. ive stripped many high quality servos from mild landings. But the greatest solution is to buy the tough tilt mechanism from flitetest. with a little bit of cutting to make it fit properly, it is the best upgrade for this tricopter. I also got the battery and camera tray from flitetest and it fits perfect onto this with a little bit of drilling and is great for FPV.

| Проверенный покупатель

  • Overall
  • Quality
  • Value

Certified Buyer Rated

May 05, 2016

a good frame for an tricopter(just a few issue) much better than rotorbitssss

Eduard Elias | Проверенный покупатель

  • Overall
  • Quality
  • Value

Customer Rated

Oct 27, 2015

The tricopterframe is well made, but the tilt mechanism has too much play. When I tried to take off, the mechanism begins to vibrate so much, that it was impossible to fly. I tried 2 different servos but always the same :/.

albert | Проверенный покупатель

  • Overall
  • Quality
  • Value

Customer Rated

Aug 21, 2015

bought this as my first tricopter. price wise you cant beat it. for what you get it is very great. the only major problem is the tilt mechanism. the best way to fix it is to buy the tough tilt mechanism from flitetest. before i put that on i crashed a couple times and it always ruined my servo and bent the stock mechanism. but once i changed it it was perfect and everything else holds up as well. a little challenging to build too but with a little basic knowledge it comes together quite well.

Jason | Проверенный покупатель

  • Overall
  • Quality
  • Value

Customer Rated

Aug 06, 2015

Sturdy folding frame with easy setup. Exploded diagram is helpful, but the best setup help is the video available walking you through it step by step.
The motor mounts are designed to break away in a crash, saving arms and motors.
Makes for a stable platform

Jordon | Проверенный покупатель

  • Overall
  • Quality
  • Value

Customer Rated

Apr 01, 2015

IMO this frame is passable and it comes with everything to be functional. BUT, the biggest issue is the motor mounts they break right away and the metal motor mount kit i found was 20 bux on amazon, no biggie, but they should have included them. Second issue is the hardware is not the best; its to long it some places, and to thinly placed in others (but still works). Third, they didn't include ANY anti vibration mechanisms like rubber washers to mount under the regular washers or rubber pieces to put between the motor mounts and frame or such. So with the extra motor mounts i bought that brought my cost with tax and shipping close to the price of the carbon fiber tricopter frame sold here on hobbyking. So, i should have just bought that one i guess. Live and learn

Blarg | Проверенный покупатель

  • Overall
  • Quality
  • Value

Customer Rated

Mar 19, 2015

I'm having trouble with the yaw mechanism. If I tighten the bolt that goes through the bearings, any more than finger tight, it becomes hard to turn the motor. Is this normal, or am I missing something?

geelen | Проверенный покупатель

  • Overall
  • Quality
  • Value

Customer Rated

Feb 26, 2015

2 tricopters purchased: perfect

880g without battery:
3 Turnigy plash 30a, 3 Turnigy d28 / 30 1000kv, 3 propelers gemfan, 1 servo hxt 900 kk2.1.5 1, 1 orange rx FASST 8ch

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. ...
  7. 8
Файлы клиентов
X900 Tail Motor Mount Broke Even Before Download [469]
No File Name Download [3745]
No File Name Download [3745]
woodmotormount Download [1308]
wmm2 Download [1261]
wmm3 Download [1683]
No File Name Download [517]
Larger servo 1 Download [651]
X900 Instructions Download [1568]
X900 ball bearing Download [1638]
  1. 1
  2. 2
Загрузить файл

Зарегистрируйтесь, чтобы загружать файлы.
пожалуйста войти в систему или Зарегистрируйтесь Начните помогать коллегам по хобби!

Аксессуары