Как летать планеры, но не хотите возиться с хлопот лебедки или высокого старта? Нет необходимости искать дальше, чем HobbyKing® Deamon 2 метра электрической планера. Включите питание, подняться на высоту, а затем задросселировать, позволяя пропеллер сложить, и пусть тепловая охота начнется.
Deamon имеет формованные стекловолокна фюзеляж, который поставляется предварительно окрашенная с завода. Застроенных пробкового дерева крыло и хвост прибывают предварительно покрыты сопоставив пленочное покрытие, и просто болт на место. Всего несколько вечеров работы все, что требуется, чтобы получить Deamon со скамейки на поле.
• Почти готов к полету - Просто установите ваш выбор двигателя, аккумулятора и электроники
• Предварительно окрашенные стекловолокна фюзеляж
• Бесчердачные пробкового дерева крылья и V-хвост преднастроенным и покрыты с завода
• Съемный навес люка делает доступ батареи и приемник быстро и легко
• Полный комплект аппаратных средств
4-канальный передатчик и приемник
4 х 9 грамм серво
28 х 45 мм 1800kv Inrunner двигателя
Управление 40A Brushless Speed
Аккумулятор 3S 1800mAh LiPoly
Складной пропеллер / Spinner - 30мм, 10x6 Лезвия
Емкость ( мАч )
Вес ( г )
A body bends ignominiously.
Incredible. Disappoint be.
The goods were sent back today.The fitting is ok but needed some adjustments, changed puchrods to carbon instead of metal and also the wing-screwfitting to carbon instead of metal and wood. The total weight with 1300MhA 3S LiPo is 843Grams and that including digital servos with metalgearbox. It flies exccelt and handles great in thermal conditions. So over all im pleased and saticfied with this model :)Ordered my plane on Sunday received it Thursday very well packaged ,plane is freakin gorgous ,wings beautiful no wrinkles got all my hardware ,fuse straight feathers like the wings well covered only issues were canopy had closed up easy fix ,and little dremeling on the holes for wing nuts and where the leading edge meets fuse took 5min,very happy great plane for the moneyThe fuse was so out of shape so i had to cut the tail off and replace with a carbon pipe.
wings are really nice done.but don't fit the fuselarge.alot of work to get this up in the air.Boom was bent.
The quality is usually level.
If you wrote a little gas will be the high-performance nerves.deamon electric ..
The wings are done well. the fuselage is really disgusting, stort, badly built, the wings are not positioned, a lot of work with the dremel and reconstruction with fiberglass.
dear hobby king, I am very disappointed with this gliderWell,
what should i wrote. Quality is bad. Fuselage was slightly curved and has to be adjusted with heat. Also have to dremel my fuselage to get the wings correct. Good one is the nice coverings. Looks to me this is a bad Quality copy from r2hobby Raptor. If you need detailed build description, download the raptor documents or just read the the rcgroup.com Raptor threads. @HK. Nextime do a better Quality checking Job.Straight up review:
Issues: Canopy doesnt fit Give me a break! TONS of mod required, Paint on fus is fair, you will need a 32MM spinner not 30, tail mods are required to attach V tail because a simple glue up wont work with a 80 HL, Wing servos will need to be slim wing mounts and then more mod will be required to get them to fit, all glue joints are crap will need to be redone.
Plus items: Nice cover job, the glass work on the Fus was pretty good.
I noticed by the pics on the internet that this model used to come with a CF canopy but now its painted fiber glass that doesnt fit, I wonder if they shipped the Radio Deletes to the US warehouse?
My speedy is a much better birsd an it only cost 70 so this one is overpriced.First about the quality: Why the hell did you take Polyurethane instead of epoxy for the fuselage?! It was slightly bended, so it was a lot of work to fit the V-Tail straight. Also the wings did not fit, it took about 1h with the dremel until the gap was big enough.
The cabin cover was not fitting at all, probably also because it bended after taking it out of the mold. I just made a new one. It is just sad for the work when you economize some cents on the material so it can not even work. Polyurethane contracts while drying, so it's quite clear that this can't work and bends everything!!
Other ways, the wing is built nicely. And the plane flies great, it's really fun! The control is smooth and direct. It's a nice slow thermal glider, but when you take the nose down, it goes also quite fast! But take care, the wings are not built for very high speed, thy start so oscillate when you go up to the limits and then straight down in one line!
Building took me about two days and it's not for beginners, because you have to fix a lot small details.
For the setup, I took:
Carbon Fiber 10x6 Folding
32mm Alloy folding Prop (Sadly this spinner does not fit the prop, it is 6.5 instead of 8mm and i had to drill the hole bigger for the motor!)
NTM Prop Drive 28-36
TURNIGY Plush 40amp
Turnigy 1800mAh 3S 30C
The plane goes vertical and the motor is quite light. But the motor is aMine has arrived a few days ago, and Crashprone is right almost about everything. And yes, I build a lot of planes...but everything he said is true. The biggest issues to me are:
1) Servo! You can not install servo on the way the provided. There is only 8mm space for servo, and I can not find the servo 8mm thick, or less if you put double sided tape, and with around 2kg strength.
2)The wing do not fit into fuselage. I ll probably have to modify the fuselage, do not know, I am still thinking of that.
3)The canopy does not fit. I mean, it is ok when you apply a much force on it, than it sits ok on fuselage, but you need a such force to open it so you can brake it and you will scratch the fuselage. I'll try to apply some heat to open it bu there is a chance to screw it:)
Other smaller issues:
1) Firewall, which I checked and saw it was not glued properly. I mean it is important, but read discussion and glued it by myself easily.
2) 30mm spinner does not fit it small. You need 32-32, luckily I had one.
3) Tail section is somehow bumpy, it is not straight so tail does not fit right, and you have to apply a lot of glue, or some modification to fill the holes between tail wings and fuselage.
Overall, it looks great and i like it. I have already Passer X from R2h... and I like it much! I wanted to order Raptor from them,too, but they could not send me due box size limitatio