New Items ФОРУМ
Зарегистрируйтесь

Итоговая цена

0,00 руб.

Cart 0 Cart 0 Loading...

HobbyKing® ™ MX2 3D EPP 955mm АРФ

HobbyKing® ™ MX2 3D EPP 955mm АРФ

Shipped From:
  • USA
  • Global
QTY:

Now save сэкономь 0,00 руб. 0,00 руб.

3 959,30 руб.
Статус:
Есть в наличии
Вес:
1560 g
SKU:
427000001
WANT FREE SHIPPING? Click here to find out more!

Представляем наш EPP 3D MX2. Благодаря фантастический дизайн и оформление, это все из EPP 3D'er удовлетворит самые нетерпеливые 3D пилотов!

Это Фюзеляж кручение очень жесткий, но легкий с нагрузками пространства под длинной верхней люк для радио и системы питания. Крыло одна часть дело с участием EPP конструкция, представляющая собой очень точный симметричный профиль крыла с 2-х дополнительных лонжеронов, чтобы свести к минимуму гибкость и твист. Поверхности управления являются чем-то еще - лифт, руль направления и элероны имеют конструкцию 3 слоя (EPP-Depron-EPP), что делает для жестких поверхностей и не прогибается при экстремальных бросков! Привязать валков Привязать 'и реакция управления мгновенно.

Свет - еще жесткая - планера добавляет к одной большой летающей 3D 'пенистого'. Водопады, луни, плоские спины, прокатные круги эта модель имеет точность, чтобы выполнить эти и любые другие шаги, вы можете думать!

Сборка планера в быстром процессе 10-15 минут с помощью небольшого среднего CA. Радио и система питания макеты очень проста, длинный верхний люк делает для легкого доступа.

Это отличная модель для общего полета парка и хардкор 3D. Вам будет трудно разорвать эту модель, он будет принимать жесткие удары и просто держать отскакивая назад каждый раз!


Особенности:
• Прочный EPP материал, легкий и устойчивый краш
• Stiff EPP / Depron поверхности составного элемента управления
• Революционная конструкция добавляет к структурной целостности и жесткости планера
• Легкий обеспечивает оптимальную нагрузку крыла
• Отличная пилотажной производительность и 3D маневренности.
• Простая конструкция обеспечивает легкий доступ и монтаж оборудования
• Стенд из цветовая схема отлично подходит для ориентации


Технические характеристики:
Размах: 955mm
Длина: 945mm
Площадь крыла: 15.2dm2
Вес: 550г (без батареи)




Требуется:
Система радиосвязи 4 канала
2217 950-1100KV Бесщеточный скороход
30Amp ESC
3S 11.1V 1100-1300MAH Li-Po
10x4.7 / 11x4.7 пропеллер
4 х 9g сервоприводы

  • Артикул 427000001
  • Brand H-King
  • Вес ( г ) 1560.00
  • длина 1020.00
  • Width 125.00
  • Высота 255.00
  • IC / 2 : Елец -
  • Motorsize ( диам - или - сс) -
  • Размах (мм ) 955.00
  • Length(mm) -
  • SaleWeight ( г ) -
  • Емкость ( мАч ) -
  • HobbyKing® ™ MX2 3D EPP 955mm ARF
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

This model is made very well, its easy to assemble, and its very durable.

I am flying it with Turnigy D2836/8 1100KV on a 11x4,7 SF APC prop. This combination is pretty OK, but if would be buying this model again I would go for about 10-20 grams heavier motor which would not make it only more powerful but also it would make finding the CG possible without adding lead in the nose. That being said, I can hover with its current setup no problem.

For all four servos I am using Turnigy™ XGD-11MB, which seem to be doing their job pretty well.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This model is made very well, its easy to assemble, and its very durable.

I am flying it with Turnigy D2836/8 1100KV on a 11x4,7 SF APC prop. This combination is pretty OK, but if would be buying this model again I would go for about 10-20 grams heavier motor which would not make it only more powerful but also it would make finding the CG possible without adding lead in the nose. That being said, I can hover with its current setup no problem.

For all four servos I am using Turnigy™ XGD-11MB, which seem to be doing their job pretty well.

Packing and shipping (east warehouse) was excellent. Assembly is easy, I used hot glue and foam-safe CA to assemble.

The plane is a little tail-heavy (I used no ballast in mine) but its light enough that I don't think it matters that much. I used the Turnigy D2836/8 motor and 30A ESC. With a 1300 mAh 3S, flying weight came in at around 651 grams. I get around 4.5 minutes flying time. You will probably do better with newer batteries as mine are approx. 2 years old.

I used the recommended control throws, with 50pcnt expo in ailerons and 60pcnt expo in the elevator. This is my first EPP and I think the large expo settings helped me keep things smooth in the air.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Packing and shipping (east warehouse) was excellent. Assembly is easy, I used hot glue and foam-safe CA to assemble.

The plane is a little tail-heavy (I used no ballast in mine) but its light enough that I don't think it matters that much. I used the Turnigy D2836/8 motor and 30A ESC. With a 1300 mAh 3S, flying weight came in at around 651 grams. I get around 4.5 minutes flying time. You will probably do better with newer batteries as mine are approx. 2 years old.

I used the recommended control throws, with 50pcnt expo in ailerons and 60pcnt expo in the elevator. This is my first EPP and I think the large expo settings helped me keep things smooth in the air.

I HAVE THIS PLANE WITH TURNIGY PARK480 /1020KVMOTOR ,HXT 900 SERVOS,WAS NOT TAIL HEAVY AS SOME HAVE SAID ,I ACTUALLY PUT A LITTLE LEAD IN TAIL FOR BETTER3D .IT HAS PLENTY OF POWER WITH THIS SETUP. FANTASTIC 3D PLANE ,DOES EVERYTHING YOU CAN IMAGINE .6MINS HARD 3D WITH 1300MAH BATTERY,GOOD SIZE TO FIT IN CAR IN ONE PIECE,HANDLES WIND WELL,EPP IS VERY TOUGH AND LIGHT AND WILL NOT CHIP OR DENT LIKE EPO ETC.JUST BUY ONE! THANKS HOBBYKING,CAN YOU PLEASE STOCK THE EDGE AS WELL?

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I HAVE THIS PLANE WITH TURNIGY PARK480 /1020KVMOTOR ,HXT 900 SERVOS,WAS NOT TAIL HEAVY AS SOME HAVE SAID ,I ACTUALLY PUT A LITTLE LEAD IN TAIL FOR BETTER3D .IT HAS PLENTY OF POWER WITH THIS SETUP. FANTASTIC 3D PLANE ,DOES EVERYTHING YOU CAN IMAGINE .6MINS HARD 3D WITH 1300MAH BATTERY,GOOD SIZE TO FIT IN CAR IN ONE PIECE,HANDLES WIND WELL,EPP IS VERY TOUGH AND LIGHT AND WILL NOT CHIP OR DENT LIKE EPO ETC.JUST BUY ONE! THANKS HOBBYKING,CAN YOU PLEASE STOCK THE EDGE AS WELL?

OMG I love this plane. Assembly is easy, I used hot glue for all the body joints and some foam-safe CA for the hinges. I tucked a little ballast in the front of the canopy to balance at recommended CG (85-90mm from LE). A bigger battery might fix this, but I love how light it flies with the 1300. Just take your time getting all the measurements right the first time and it will fly like a dream. 5 minute flight times on the Zippy 1300 3S with a Park 480 and Plush 40A. I have only run 11x4.7 props so far, and it is nice and punchy. This plain really floats well!!! I would definitely recommend this; even for a first time-builder, medium-skill pilot, it was a breeze.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

OMG I love this plane. Assembly is easy, I used hot glue for all the body joints and some foam-safe CA for the hinges. I tucked a little ballast in the front of the canopy to balance at recommended CG (85-90mm from LE). A bigger battery might fix this, but I love how light it flies with the 1300. Just take your time getting all the measurements right the first time and it will fly like a dream. 5 minute flight times on the Zippy 1300 3S with a Park 480 and Plush 40A. I have only run 11x4.7 props so far, and it is nice and punchy. This plain really floats well!!! I would definitely recommend this; even for a first time-builder, medium-skill pilot, it was a breeze.

Love this little plane, bright colours make orientation easy and looks great in the air, very easy build

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Love this little plane, bright colours make orientation easy and looks great in the air, very easy build

aereo senza pretese, comunque esegue le figure senza problemi

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

aereo senza pretese, comunque esegue le figure senza problemi

Great plane, but made some mods. 2.5mm wire and 2 1/4 inch narrow wheels, Park 480 with a 11x8 prop, and using a 2200 mAh 3cell, yes there is plenty of room with a little trimming. after a catastrophic crash 15 minutes and a hot glue gun it was back in the air. Only ordering another because mine is so ugly due to all the glue and tape. Perfect plane for learning 3D flying.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Great plane, but made some mods. 2.5mm wire and 2 1/4 inch narrow wheels, Park 480 with a 11x8 prop, and using a 2200 mAh 3cell, yes there is plenty of room with a little trimming. after a catastrophic crash 15 minutes and a hot glue gun it was back in the air. Only ordering another because mine is so ugly due to all the glue and tape. Perfect plane for learning 3D flying.

Nice plane, after fitting stronger landing gear wire and larger wheels. I fitted a DAT-3511-750KV motor and 11x8 prop. running on 3s 2.2Ah compact. Will try 4s with 10x6 when batteries come in stock again. Wing is very strong, but fuse not as robust as expected. Fun to fly for sure.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Nice plane, after fitting stronger landing gear wire and larger wheels. I fitted a DAT-3511-750KV motor and 11x8 prop. running on 3s 2.2Ah compact. Will try 4s with 10x6 when batteries come in stock again. Wing is very strong, but fuse not as robust as expected. Fun to fly for sure.

Love this plane. Very aerobatic and will do every trick in the book. i was kind of skeptical about the 450 motor they recommended because of the weight of the plane with all electronics but its works great and i get unlimited vertical. She is very durable but the i will say the plane isnt 100pcnt epp , there is some deperon foam sandwiched bettween the epp foam wich is fine but use Foam safe ca.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Love this plane. Very aerobatic and will do every trick in the book. i was kind of skeptical about the 450 motor they recommended because of the weight of the plane with all electronics but its works great and i get unlimited vertical. She is very durable but the i will say the plane isnt 100pcnt epp , there is some deperon foam sandwiched bettween the epp foam wich is fine but use Foam safe ca.

Very good airplane, i fly it 6 months now. It can do all 3d manuevers (harrier, hover, torque roll, blender, KE spin, rolling harrier, rolling loop, pinwheel,........). Perfect plane to learn 3d aerobatics. It lacks on precision flying, but it is an EPP plane after all. I fly it with an Axi 2808/24 and 10x4.7 prop, 30A Jeti ESC and 3s 1800mah 25c. The batteries are a bit to big, I had to modify to fit, so 3s 1300mah is the way to go. It is a very good buy for the money.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Very good airplane, i fly it 6 months now. It can do all 3d manuevers (harrier, hover, torque roll, blender, KE spin, rolling harrier, rolling loop, pinwheel,........). Perfect plane to learn 3d aerobatics. It lacks on precision flying, but it is an EPP plane after all. I fly it with an Axi 2808/24 and 10x4.7 prop, 30A Jeti ESC and 3s 1800mah 25c. The batteries are a bit to big, I had to modify to fit, so 3s 1300mah is the way to go. It is a very good buy for the money.

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. ...
  7. 8
Customer files
SkyWing39inManual Download [412]
Manual Deutsch Download [559]
Nose mod by not2fast Download [626]
undercarriage mod mca Download [71]
No File Name Download [1241]
Skyway Product Manual Download [412]
Redo motor mount Download [451]
8589C28C-6AA4-405E-8190-4F2E6F15DC34.jpeg Download [922]
215DCF21-23F2-441E-8E26-E6B1BE949F2D.jpeg Download [446]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save