New Items ФОРУМ
Зарегистрируйтесь

Итоговая цена

0,00 руб.

Cart 0 Cart 0 Loading...

v1.1 HobbyKing ™ Бикслер ™ EPO 1400мм - (АРФ)

v1.1 HobbyKing ™ Бикслер ™ EPO 1400мм - (АРФ)

Discontinued Product

Please continue searching for a similar product.
Вес:
1935 g
SKU:
HK-SS-ARF
WANT FREE SHIPPING? Click here to find out more!

В поисках идеального тренера? или в дорогие FPV платформы? Может быть, вы пилот клуб ищет что-то вы можете просто вытащить из машины и летать на одном из этих ленивых воскресенье после обеда? HobbyKing® ™ Bixler® ™ помечает все эти коробки и многое другое! Проверенная платформа для начинающих до промежуточных пилотов!

Bixler® ™ имеет все необходимые ингредиенты, изготовленные из супер жесткой пены EPO, некоторые сервоприводы предварительно установлены, поставляемый мотор требует установки, фюзеляж половинки необходимости присоединения так минимальное время сборки требуется, по сути, по вечерам работать и оно должно быть готов к полету!

Стоп Нажмите !!

Дайте нам ввести V1.1 Bixler® ™ с множеством улучшений по сравнению с оригинальной Bixler® ™.
Наши особенности v1.1 переселены рулей высоты и поворота, теперь ближе к хвосту и доступную через магнитный люк на нижней части фюзеляжа. Зачем? Вы можете спросить - Это позволяет гораздо более полезное пространство внутри передней части фюзеляжа, то, что FPV'ers собираются благодарить нас за! Мы также обновили входящий в комплект поставки оборудования включает более качественные компоненты, такие как новые рога управления 4 болта на всех поверхностях. Мы также включаем 2 разных пропеллеры, один для высокой скорости, а другой для перевозки тяжелых полезных нагрузок.
Вы - наши клиенты говорили, мы слушали! Конечный результат V1.1 Bixler® ™!

Что бы вы ищете, то Bixler® ™ имеет оно охватывает, а также в комплект входит инструкция цветной буклет.

Технические характеристики:
Материал: EPO пены
Размах: 1400мм
Длина: 925mm
Площадь крыла: 26dm2
Нагрузка на крыло: 25g / дм2
Полетный вес: 650г
Двигатель: 2620-1900kv Бесщеточный Outrunner ( в комплекте)
ESC: 20A ж / BEC (обязательно)
Сервопривод: 4 х 9g ( в комплекте)

Необходимые:
20A ESC
4 Channel Radio (Tx / Rx)
1300mAh ~ 2200mAh 3s LiPoly батареи

  • Артикул HK-SS-ARF
  • Brand Other
  • Вес ( г ) 1935.00
  • длина 970.00
  • Width 175.00
  • Высота 230.00
  • IC / 2 : Елец -
  • Motorsize ( диам - или - сс) -
  • Размах (мм ) 1400.00
  • Length(mm) -
  • SaleWeight ( г ) -
  • Емкость ( мАч ) -
  • HobbyKing™ Bixler™ v1.1 EPO 1400mm -
  • HobbyKing™ Bixler™ v1.1 EPO 1400mm -
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

there are plenty of other sites for rc gear on ebay and a lot of it offers free shippjng,so go look guys.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

there are plenty of other sites for rc gear on ebay and a lot of it offers free shippjng,so go look guys.

Please, HK! Hire a manual-writer who has, once in his life, spoken to an English-speaking person! The "manual" starts half-way through the build, is very difficult to interpret, and leaves out about half of the necessary steps, leaving the builder to figure out what to do, in what order, on his own. And those two wing-screws! I DEFY you to thread those through the tight wooden washers, through two wings and down into a tee-nut that is buried in the foam of the fuselage. Not humanly possible! Everyone I talked to who has this plane admits that they either gave up after getting one screw in place, or gave up entirely and glued the wings on. Nice finish, though. Too bad you won't publish this review.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Please, HK! Hire a manual-writer who has, once in his life, spoken to an English-speaking person! The "manual" starts half-way through the build, is very difficult to interpret, and leaves out about half of the necessary steps, leaving the builder to figure out what to do, in what order, on his own. And those two wing-screws! I DEFY you to thread those through the tight wooden washers, through two wings and down into a tee-nut that is buried in the foam of the fuselage. Not humanly possible! Everyone I talked to who has this plane admits that they either gave up after getting one screw in place, or gave up entirely and glued the wings on. Nice finish, though. Too bad you won't publish this review.

Bester Bixler aller Zeiten.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Bester Bixler aller Zeiten.

Great product, ready to fly in no time.

Perfect for first time flyers and FPV lovers!

If you crash a little bit of CA and you are back in the air!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Great product, ready to fly in no time.

Perfect for first time flyers and FPV lovers!

If you crash a little bit of CA and you are back in the air!

This glider flies extremely well. Slap in a Turnigy d2826-6 motor,Turns into a rocket. Used a Turnigy 45 amp...2200 battery, 7 x 5 prop. Wing spars on fuselage and wings. I just bought another one tonight. I really recommend this plane.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This glider flies extremely well. Slap in a Turnigy d2826-6 motor,Turns into a rocket. Used a Turnigy 45 amp...2200 battery, 7 x 5 prop. Wing spars on fuselage and wings. I just bought another one tonight. I really recommend this plane.

What an excellent model. Ive had the plane a week or so now and had about 20 flights. The kit arrived very quickly and was built over a long day with a couple of hours the next evening finishing off. The kit went together really easily, it was short a few screws for the control horns but no biggie, I needed to extend the power leads from the speed controller so I could reac them whilst plugging in the battery pack. Im running the standard motor & prop that came with the kit and a 30 amp sc, all ok exfept the supplied props are pretty poor, I had severe vibration until I balanced up the prop, I had to scrape so much off one blade I had to get a dustpan and brush...no kidding!! With a 2200 3s pack I needed an ounce of nose weight but that will probably be slowly removed as I get used to the plane. Im getting around 35 minutes in climb and glide type flying, the bixler climbs at about 70 degrees and gets high really quickly, it thermals as well as any pure glider of equal size but will really hustle if thats your choice. I cant recommend this model highly enough, its great in every way.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

What an excellent model. Ive had the plane a week or so now and had about 20 flights. The kit arrived very quickly and was built over a long day with a couple of hours the next evening finishing off. The kit went together really easily, it was short a few screws for the control horns but no biggie, I needed to extend the power leads from the speed controller so I could reac them whilst plugging in the battery pack. Im running the standard motor & prop that came with the kit and a 30 amp sc, all ok exfept the supplied props are pretty poor, I had severe vibration until I balanced up the prop, I had to scrape so much off one blade I had to get a dustpan and brush...no kidding!! With a 2200 3s pack I needed an ounce of nose weight but that will probably be slowly removed as I get used to the plane. Im getting around 35 minutes in climb and glide type flying, the bixler climbs at about 70 degrees and gets high really quickly, it thermals as well as any pure glider of equal size but will really hustle if thats your choice. I cant recommend this model highly enough, its great in every way.

A bit fiddly to assemble and stuff doesn't line up exactly. Also no glue is included (wouldn't be too much to ask for a small tube to stick the tail on). Mine had the wrong prop included and the motor pushed it backwards! (yes it was rotating the right way), but a spare prop soon had it in the air and it flies really well. Would be ideal for beginners and experienced pilots alike

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

A bit fiddly to assemble and stuff doesn't line up exactly. Also no glue is included (wouldn't be too much to ask for a small tube to stick the tail on). Mine had the wrong prop included and the motor pushed it backwards! (yes it was rotating the right way), but a spare prop soon had it in the air and it flies really well. Would be ideal for beginners and experienced pilots alike

Great trainer, can do inverted stall turns also. total beginners should look for help to assemble, soldering required.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Great trainer, can do inverted stall turns also. total beginners should look for help to assemble, soldering required.

Fantastic plane for the money. There is no reason why this should not be your first plane. The only thing that is slightly tricky is the hand launch - set your throttle to approx 60pcnt and give it a good firm throw at a slight upward angle. If you've done a glide test first, all should go well. I added a carbon tube into the fuselage all the way to the tail for extra rigidity. With this in place mine balances perfectly with a 2200 3s all the way up front. Very floaty, but a good turn of speed too. 20 mins flights are easy.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Fantastic plane for the money. There is no reason why this should not be your first plane. The only thing that is slightly tricky is the hand launch - set your throttle to approx 60pcnt and give it a good firm throw at a slight upward angle. If you've done a glide test first, all should go well. I added a carbon tube into the fuselage all the way to the tail for extra rigidity. With this in place mine balances perfectly with a 2200 3s all the way up front. Very floaty, but a good turn of speed too. 20 mins flights are easy.

I've owned several Bixlers since they were first introduced. This review is over the version 1.1 Bixler purchased March of 2016. They have really made a bunch of improvements to this airframe - addressing many of the issues that required mods in the past. No longer does nose weight need to be removed. Plywood reinforcement in the motor pod is genius. Motor mount is vastly improved. I'd give this 5 stars all the way down except for one disappointing issue - the motor shaft is a tiny fraction of a mm smaller than 3mm so the 3mm collet supplied does not grab when completely compressed.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I've owned several Bixlers since they were first introduced. This review is over the version 1.1 Bixler purchased March of 2016. They have really made a bunch of improvements to this airframe - addressing many of the issues that required mods in the past. No longer does nose weight need to be removed. Plywood reinforcement in the motor pod is genius. Motor mount is vastly improved. I'd give this 5 stars all the way down except for one disappointing issue - the motor shaft is a tiny fraction of a mm smaller than 3mm so the 3mm collet supplied does not grab when completely compressed.

Customer files
Bixler_v1.1_Manual Download [6317]
Bixler_v1.1_Manual Download [4444]
Bixler_v1.1_Manual_cover Download [1875]
Better Bixler Prop-1 Download [139]
Better Bixler Prop-2 Download [414]
My EPO Bixler Download [73]
Bixler com piloto Download [2439]
Bixler EDF Download [1821]
Flew Into A Bandsaw Download [1978]
Rota de colisão Download [432]
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Related Tags

Combine Essential Items and Save