Зарегистрируйтесь

Product Finder

Настройки

Useful links

Живой чат
 
[["US","AU","GB","DE"]]
Зарегистрируйтесь

HobbyKing ™ Фокке Вульф FW-190 Warbird EPO 1600мм (ПНФ)

HobbyKing ™ Фокке Вульф FW-190 Warbird EPO 1600мм (ПНФ)

Discontinued Product

Please continue searching for a similar product.
Stock:
OUT OF STOCK
Вес:
5200 g
Артикул:
9306000066-0

Combine

essential items and
battery
acc
Описание
товара

Фокке-Вульф FW 190 Würger был немецкий одноместный, одномоторный истребитель разработан Курт Танк в конце 1930-х годов и широко используется во время Второй мировой войны. Работает на радиальным двигателем в большинстве версий, Fw 190 имел достаточную мощность и был в состоянии поднять большие нагрузки, чем Messerschmitt Bf 109. Fw 190 был использован Люфтваффе в самых разнообразных ролей, в том числе день истребитель, истребитель-бомбардировщик , штурмовики и, в меньшей степени, ночной истребитель. Fw 190 очень любили своих пилотов. Некоторые из самых успешных асов-истребителей люфтваффе утверждал великое множество их убивает его во время полета, в том числе Отто Киттель, Новотны и Рудорффер.

Когда FW 190 начал летать в оперативном над Францией в августе 1941 года он быстро зарекомендовал себя как превосходный во всех, но радиус разворота к основному фронтового истребителя ВВС, The Spitfire Mk. В, особенно при низких и средних высотах. 190 сохранял превосходство над союзными бойцами до введения Spitfire Mk. IX в июле 1942 года.

Fw 190 стал основой Jagdwaffe (истребитель Force), наряду с Bf 109. На Восточном фронте, Fw 190 был достаточно универсален, чтобы использовать в Schlachtgeschwader (Battle Wings или забастовка Wings), специализированные подразделения штурмовые, которые достигли многого успех против советских сухопутных войск. В качестве перехватчика, то Fw 190 претерпел улучшения в серии 190D, чтобы сделать его эффективным на большой высоте, что позволяет ему поддерживать относительную паритета с его противниками союзников.

HobbyKing Фокке Вульф FW-190 отлит во всей пены EPO и имеет множество функций, которые сделают любого масштаба энтузиастов счастливым. Прибыв в конфигурации вилки и летать, минимальная работа требуется, чтобы получить FW-190 в воздух. Мы проделали сложную работу по установке двигателя, сервоприводы, втягивается, и даже светодиодные фонари для вас. Просто заполните окончательную сборку, программа вашего радио, и летать. Масштабные детали включают в себя убирающиеся шасси, как и любой хороший Warbird должен иметь, раздвижной навес, искусственную пулемет и других масштабных деталей, работающих расщепленных лоскутов, со шкалой 3 пропеллер Завершают модель.

FW-190 очень легкий для модели такого размера, так что, если это ваш первый больше Warbird, не имеют страха, она не настоящая кошечка. Тем не менее, нажать на газ останавливается, это Фокке Вульф и эта птица оживает. Восхождение на перехват истребителей союзников в спешке. Coming на посадку, закрылками, легкой нагрузки на крыло и большой пропеллер диск замедлить модель вниз, чтобы поселиться в хорошей 3 очка или главных передач посадок.

Обязательно ознакомьтесь с разделом HobbyKing ™ Фокке Вульф FW-190 на сегодняшний день,

Особенности:
• Жесткая EPO Строительство
• Подключите и Fly Формат, Просто добавьте батареи и Ресивер!
• Большой размер идеально подходит для стабильной полет в разнообразие погодных условий
• убирающимся шасси и закрылки сплит
• Светодиодные навигационные огни предварительно установленная
• Подвижный навес
• Большой съемный люк батареи
• Болт на хвосте, не требуется клей

Технические характеристики:
Размах: 1600мм
Длина: 1350мм
Вес: 3300g
Сервопривод: 4 х мини 9g, 2 х 40г
ESC: 80A ж / Внешняя UBEC
Двигатель: 5060 Brushless Походный 290 кВ

Требуется:
6-канальный передатчик и приемник
Батарея 6S 22.2V 4000mAh LiPoly

Product
Specifications

Дополнительная информация

  • Артикул:
    9306000066-0
  • Brand:
    HobbyKing
  • Емкость ( мАч )
    Нет
  • Вес ( г )
    5200.00
  • длина:
    1320.00
  • ширина:
    310.00
  • Высота
    435.00
Community
Discussions
Rate&
Review

Напишите ваш собственный отзыв

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
This plane looks really good!! But there are some things where you should lay your hands on before flying. I have changed the retracts and legs for better ones. Also the rudder and elevator servo's are bad quality, so i have changed those for digital (4Kg) servo's. I use a 6 cell 3700 Mha zippy 25c battery all the way up in the nose. It fits well and the C.G. is perfect. She looks great on the field and much better in the sky. Its a real "head turner". To bad the price is that high...
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Nice plane. Fly easy and realistic. Handles well some wind.
I had do unscrew the retracts, redo some holes to rescrew them and fill some oil. No more trouble.
One wing touch the runway and it flip over. The wood spar between them broke immediately. I expected for that...
I have to fix it and add some carbon rods where the wing meets the fuse. CG at 100mm seems good.
Tested with 6s3300 and 7 minutes fly. Not bad
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Managed to pick this up in the sale hence five stars for value, I definitely wouldn't want to pay full price but then I wasn't looking to buy anything like this.
The retracts are very low quality, they have a central controller and mine just didn't work. replaced them with servoless retracts from the scratch and dent tab at about 6 quid and all is well.
Rest of model is good quality, nice finish, nav lights are of no real use over twenty feet away but look well enough on the floor.
This model really excels in the air, fly's beautifully, looks very convincing, even sounds good. The prop is incredibly tough, power train is adequate, detail parts break very easily but can be removed for transit, (guns, steps and pitot).
No real bad habits, lands easy at tickover, takes off in 10 feet, not especially prone to tipping, its no 3D bird but fly's on rails and easily exceeds scale performance.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
A very good looking plane and got nice comments from all who have seen it. the only short coming is the landing gear, I am going to maybe change it.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I bought one of these on the recent sale and am very happy with what I got for a very reasonable price. Finish an presence of the model is really very good. I will be installing proper hinges everywhere for better movement and durability. Servos and ESC all work well. At the price despite the retract problem I think it deserves 4 stars.

Yes of course the retract controller board does not work properly. The retracts themselves work fine. Just provide power first one way and then reverse polarity and up and down they go. There is simple and low cost solution suggested to me by a fellow club member.
Take the circuit board out of a pair of unused or even new HobbyKing cheap retracts that have a circuit board and install it in line from your receiver to the retract. Use the wires that would go to the motor in the retract into the connector on the retract by adding a plug. I have tried this with a servo tester and they work just fine. I will install in the plane with a small separate battery pack to power the retracts to avoid flattening the flight pack should a servo jam etc.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Nice kit for the price, excellent rendition of the FW-190 with nice details and scale accessories. Electronics works well, four digital servos in the wing, two large size analog servos for elevator and rudder. Large esc is good size made by well-known quality brand Hobbywing, and so is the 8A bec. Electric retracts work flawlessly (if you plug them in correctly), landing gear is big and sturdy. Large motor on 6S motor delivers adequate power, scale 3-bl prop with scale spinner is fairly balanced and looks very good on the model. Only disadvantage so far is no spare parts in sight. Five stars.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Hi, I was disappointed in the overall quality, compared to the of some of Hobbykings other products. The moldings, fit of control surfaces etc is very poor. At the price I paid a year ago, it was only fair value at best. Todays price represents very poor buying. It flies nice, modest power, looks very good in the air. I love what Hobbyking do, I have plenty of their products and will continue to buy from them, some items are better than others, just the way it goes, this one is only 'so so'.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
This plane really could have been great with just a little more effort in design and manufacturing!

Almost...

"The HobbyKing Focke Wulf FW-190 is molded in all EPO foam and has a host of features that will make any scale enthusiast happy."
Come on guys!

For me personally, I would have paid more for better quality components and better scale features.

Surely it isn't that difficult to source components that are even remotely scale if you are going to the trouble of making a product that would make any scale enthusiast happy in the first place.

Or if it was offered as an airframe without the questionable hardware and at a reduced rate.
I for one would have bought an unpainted airframe and a decal sheet. Just a thought!
Mine came with one dead flap servo and one dead retract. I would have liked to have flown it at least once before replacing the poop electrical hardware with better quality.

Well it is a 1600mm FW 190 after all and as no other manufacturers are doing it, that is attractive and for me a must have.
It has potential and hopefully it will be worthwhile to spend some more time (and more money) on to have a menacing big butcher bird at the field.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Hi there. I have purchased the HK FW1600. Right out of the box, the retracts didn't work. A mate also purchased this model and had a faulty servo and a fault retract. Has anyone experienced any problems with the retracts and does anyone know what other brand retract make/model can replace these? I note that the gear shaft closes on opposite side of the motor.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
The plane is very nice built with several scale-details.
Wheels are on the small side but wheel wells have a diamter of 95mm - so there is room for bigger ones.
Small mould-error at the wing Joint - correctable with a knife in 5sec.
Fuselage halfes were not correctly glued together on mine (3mm wide gap at bottom in front of wing).
Split falps are a bit heavy with quite stiff hinges but no need to replace.
Battery compartment is on the small side but OK (~50x50x200mm*)
*from Firewall to end of ramp, open at the rear end
From the technical point of view the bird is quite nice - couldnt fly it yet, but will report after maiden.
BUT: the bottom of the wing and the lower part of the fuselage is painted in a Kind of brignt "greenish" grey - comparable with the color of the Eflite Hawker Sea Fury - and Looks simply ugly.

BTW: it is a modified Version of the Starmax FW190 - lots of Infos at rcgroups ("New Starmax FW-190 A8 EPO 1600mm")
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
  • HK FW-190

Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Customer files
Alu Spar download now [106kb]
Alu Spar download now [106kb]

Combine

essential items and
battery
acc

Метки товара

Используйте пробелы для отделения меток. Используйте одинарные кавычки (') для фраз.