HobbyKing ™ XD-6 Баланс зарядное Plus Аксессуары 240W (4 X 60W)

• Overall
• Quality
• Value

Customer Rated

Jul 12, 2015

charger doesn't feel cheap. all the ports work well. i like that it's 60 watts per port and 6 amps. i charged 4 batteries and it charges and balances my lipo batteries well. my batteries are mostly 3 and 4 cell. i will use a few more months and give a final review. for now it's an awesome charger.

• Overall
• Quality
• Value

Customer Rated

Jan 23, 2015

j'ai achet ce chargeur... grosse dception! Il n'y a que 2 plaquette de connections balance, pas d'alimentation (j'ai du acheter a en plus : http://hobbyking.com/hobbyking/store/__17424__HobbyK
ing_350w_25A_Power_Supply_220v_240v_.html). Mais
soit, tout est l, je lance la premire charge 4 batteries 5000mha la fois (c'est prvu pour a non?). Les 3 premires finissent correctement la charge et la dernire charge ne s'est pas arrte! Rsultat : la batterie a gonfl et explos dans mon garage provoquant des flammes de 2 mtres! j'ai failli avoir un incendie grave! SURTOUT SI VOUS ACHETEZ CECI, PREVOYEZ DES SACS DE CHARGE TYPE http://hobbyking.com/hobbyking/store/__41869__Super_
Strong_Flame_Retardant_Silicone_Fiberglass_Bag_120_x
_65_x_55mm.html Je
joins une photo du rsultat... la photo parle d'elle mme : [URL=http://www.hostingpics.net/viewer.php?id=25090
8IMG2248.jpg][IMG]http://IMG
width='480px'11.hostingpics.net/pics/250908IMG2248.j
pg[/IMG][/URL]

• Overall
• Quality
• Value

Customer Rated

Nov 21, 2014

very good 4ch charger.
just a little advices :

- to make charger's displays more readable, adjust Voltage Output from power supply ..
- in case of "Input Vol Error" message, adjust V output from you power supply if possible.

• Overall
• Quality
• Value

Customer Rated

Oct 06, 2014

Solution of Short Err Problem:

Few weeks ago my charger produce on a proper baance setup the short err, without real short circuit. Today I found the soultion: one resistor went wrong. If the chanel 1 is wrong you must replace the R412, if ch2 is wrong the R405 is wrong etc... (check the mother board!) The value of this resistor is between 0,04-0,05 Ohm. I reproduce it from resistor cabel. Be carfull, the quality of seal or the wrong Ohm value can cause verry different current like the display shows!!!! After the replace always measure the charge current!!!! and set the proper Ohm value of this resistor!!!!! If you go down with resistance the current will grow up!

• Overall
• Quality
• Value

Customer Rated

Nov 17, 2013

looks good, works great. however as someone else mentioned, hk should bundle a few more jst-xh balance board and xt60 banana plug into the package... great product nonetheless!

• Overall
• Quality
• Value

Certified Buyer Rated

Nov 05, 2013

qualita prezzo eccellente funziona benissimo

• Overall
• Quality
• Value

Certified Buyer Rated

Jun 11, 2013

To charge 4 zippys at a time you need 3 more balance boards like Quattro 4x6S Charge/Balance board and 4 xt 60 cables like this Charge Cable w/ Male XT60 <-> 4mm Banana plug

• Overall
• Quality
• Value

Customer Rated

May 04, 2013

Already got mine here in Brazil. One detail that I did not like was the LCD, in my case came with black letters. Blue backlight looks good with white letters.

• Overall
• Quality
• Value

Customer Rated

Jan 06, 2013

Great charger so far. Helped de-clutter my field box. I went from 4 independent chargers to just this one. I would highly recommend anyone thinking about buying this charger also buy 3 extra balance boards and 3 extra banana plug wires with bare ends so you can put the proper battery connectors on. 90pcnt of my batteries have XT60 plugs so I made up 4 XT60 to Banana Plug cables. If you have other connecters, HK also sells converters from XT60 to just about any other connector. It's also at a very competitive price even with the high shipping cost to Canada.
Also, if you fly the e-flite UMX planes you definetly want to also buy a (6 x Parallel JST-PH Charge Lead for E-flite UMX Series 2S Lipoly) cable SKU#258000043

• Overall
• Quality
• Value

Certified Buyer Rated

Nov 18, 2012

bello ed imponente, un prodotto che oltre a saper fare bene il suo lavoro rende la postazione di ricarica pi professionale