Зарегистрируйтесь

Product Finder

Настройки

Useful links

Живой чат
 
[["US","AU","GB","DE"]]
Зарегистрируйтесь
Shipped From:
  • Global

HXT 2435 (370С) 4040kv Brushless Inrunner

HXT 2435 (370С) 4040kv Brushless Inrunner

Discontinued Product

Please continue searching for a similar product.
Stock:
OUT OF STOCK
Вес:
98 g
Артикул:
HXT2435-4040
Описание
товара

Мощность двигателя: 2435 (370С)
Скорость: 4040kv
ESC Обязательный: 18A
Диапазон напряжения: 6 ~ 12v
Нет нагрузки Curr: .9A
Максимальная нагрузка: 25A

Диаметр: 24.2mm
Длина: 37мм
Передняя монтажных отверстий Расстояние: 16мм
Front Mount Размер резьбы: M3
Диаметр вала: 2.3mm
Длина вала: 12мм
Вес: 65grams

Product
Specifications

Дополнительная информация

  • Артикул:
    HXT2435-4040
  • Brand:
    Не применимо
  • Вес ( г )
    98.00
  • длина
    95.00
  • ширина:
    40.00
  • Высота:
    50.00
  • Kv ( об / об)
    4040.00
  • Unit Weight (g)
    65
  • Max Токи (A):
    25.00
  • Сопротивление ( тк ):
    93.00
  • Максимальное напряжение (В )
    12.00
  • Мощность (Вт )
    280.00
  • Вал А ( мм):
    2.00
  • Длина В ( мм ):
    37.00
  • Диаметр С ( мм )
    24.00
  • Может Длина D (мм )
    35.00
  • Общая длина E (мм ):
    49.00
Community
Discussions
Rate&
Review

Напишите ваш собственный отзыв

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
I ordered two of these motors along with a lot of other items for a GWS A10. I found that one motor had a 2mm shaft and the other a 2.3mm shaft. Just a note to others to check and let HC know. Read their policy and act quickly.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Ordered two of these, but got Turnigy B2435-4040 delivered instead???



It is a good engine ans has the same specs but:......



The engine shaft on the turnigy b2435-4040 is 2.3 mm and NOT 2 mm.



So, beware if you are hoing to use this on a GWS EDF 55 rotor. These rotors need a 2mm shaft!







verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Me parece un buen motor, que helice le pondriais para un modelo de 650gr?

seria este motor bueno para un FunJet?



Gracias.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I use this motor on my Blade CP heli. Works great and is a direct fit! I recommend running with one or two heat sinks.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Excellent performance in a modified Artech SU-27 Flanker. A bang for the buck...

About 20 amps. at full trhottle with a 64 mm fan. Perfect...

verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I was testing this motor 2 days in a row. It doesn't get that much hot with a heat sink on it. It's not that fast, BUT I was running very small pinion with it. 4400 version would be definitely better, but if you want a motor for Mini Inferno and then lend it to someone because you don't want that person to wreck your car... it's a good choice.



Even if I'm saying it's not too fast, don't be mistaken, with a higher pinion it would be lot faster.



For this price it's a very good thing to try.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
As said before this motor is good for 55mm 6-blade EDF's. I got 16-17A at full throttle producing 165 watts with a Loong-Max 3s1300mah20c. After about 10 sec. it smoothed out to around 16A and about 150 watts. The motor ran smooth and was very responsive and didn't get hot at all. I gave it four stars due to the fact that one of the three I ordered had really bad un-even windings that didn't line up in the can properly.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Excellent Motor! Used it in the popular Blade CP Heli. After burning out 2 big name motors I decided to try a more cost effective solution. No regrets. Runs cool during forward flight but also handles extended hovering. Already recommended this motor to friends. Perfect solution for the Blade CP series helicopter.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
i'm a very happy for this motor. Motor is a good made and for the price.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
After reading Kelly's review, I make a purchase immediately because I have the same experience by burning Hacker E30 and AXI Mini Model.



I do never feel sad of buying this motor because it give me no disappointment. I put it in my HB King-2. It is running very hot, but it have not burnt out like the other two.
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Метки товара

Используйте пробелы для отделения меток. Используйте одинарные кавычки (') для фраз.