New Items ФОРУМ
Зарегистрируйтесь

Итоговая цена

0,00 руб.

Cart 0 Cart 0 Loading...

HXT 2835 (380S) 2700kv Brushless Inrunner

HXT 2835 (380S) 2700kv Brushless Inrunner

Discontinued Product

Please continue searching for a similar product.
SKU:
HXTBS-2835C-2700
WANT FREE SHIPPING? Click here to find out more!

Мощность двигателя: 2835 (380S)
Скорость: 2700kv
ESC Обязательный: 25A
Диапазон напряжения: 6 ~ 12v
Нет нагрузки Curr: 1.2A
Максимальная нагрузка: 35A

Диаметр: 28.2mm + радиатором (4 мм)
Длина: 37мм
Передняя монтажных отверстий Расстояние: 19мм
Front Mount Размер резьбы: M3
Диаметр вала: 3.175mm
Длина вала: 12мм
Вес: 98.7grams (включая провода и вилки)

  • Артикул HXTBS-2835C-2700
  • Brand -
  • вес 150.0000
  • длина 0.00
  • Packaging Width 0.00
  • Высота 0.00
  • Kv ( об / об) 2700.00
  • Max Токи (A) 35.00
  • Сопротивление ( тк ) 0.00
  • Максимальное напряжение (В ) 12.00
  • Мощность (Вт ) 0.00
  • Вал А ( мм) 3.00
  • Длина В ( мм ) 37.00
  • Диаметр С ( мм ) 34.00
  • Может Длина D (мм ) 35.00
  • Общая длина E (мм ) 49.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Put this on a 48" Zagi with a 3S 2200 30C NanoTech LiPo and a 40A Blue Series ESC and an APC 6x4. It provides excellent performance for the price. Getting up to 11 minutes with throttle management. The motor gets hot but the heatsink does an excellent job.

Lo us en un Zagi de 122cm con una lipo 3S 2200 30c NanoTech y un regulador "Blue Series" de 40A y una helice APC 6x4. Es un excelente valor considerando el nivel de rendimiento que provee. Logr vuelos de 11 minutos con sta configuracin y buen manejo del acelerador. El motor se calienta bastante pero el disipador de calor funciona muy bien.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Put this on a 48" Zagi with a 3S 2200 30C NanoTech LiPo and a 40A Blue Series ESC and an APC 6x4. It provides excellent performance for the price. Getting up to 11 minutes with throttle management. The motor gets hot but the heatsink does an excellent job.

Lo us en un Zagi de 122cm con una lipo 3S 2200 30c NanoTech y un regulador "Blue Series" de 40A y una helice APC 6x4. Es un excelente valor considerando el nivel de rendimiento que provee. Logr vuelos de 11 minutos con sta configuracin y buen manejo del acelerador. El motor se calienta bastante pero el disipador de calor funciona muy bien.

Very powerful in runner! I used it in a 1,8m wingspan glider, with fold propeller and 1800mAh 3s LiPo.



Alex

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Very powerful in runner! I used it in a 1,8m wingspan glider, with fold propeller and 1800mAh 3s LiPo.



Alex

Enough Power for TT01, low temps on Motor and Spinning Wheels on 3s! I use 19T...
Needs 40A ESC with Fan. The 30A Quik ESC is to weak. After 30m with 3 Times full throttle is the ESC verry hot!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Enough Power for TT01, low temps on Motor and Spinning Wheels on 3s! I use 19T...
Needs 40A ESC with Fan. The 30A Quik ESC is to weak. After 30m with 3 Times full throttle is the ESC verry hot!

fantasti motor las tres bbb

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

fantasti motor las tres bbb

Silnik bardzo adnie wykonany.Dziaa bez zarzutow.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Silnik bardzo adnie wykonany.Dziaa bez zarzutow.

It came with no screws, and the size of the internal holes is not standard (beetween M2,5 and M3).

The internal part of the shaft have a diameter of 4mm although the end of it is reduced to 3,175mm. Maybe is possible to replace it with a stronger 4mm one.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

It came with no screws, and the size of the internal holes is not standard (beetween M2,5 and M3).

The internal part of the shaft have a diameter of 4mm although the end of it is reduced to 3,175mm. Maybe is possible to replace it with a stronger 4mm one.

The good motor. Has put on mini inferno 09, altered from Gas Engines. Pushes approximately to 40 km\ch

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

The good motor. Has put on mini inferno 09, altered from Gas Engines. Pushes approximately to 40 km\ch

My Tests on 3S 2650mah with TowerPro H40A ESC:



APC 6x3, 21450 RPM, 25.7A at min voltage 10.8V = 277 watt.



APC 6x4, 19890 RPM, 26.2A at min voltage 10.7v = 280 watt.

Computed thrust 874g, watt out 169w, ETA 70%

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

My Tests on 3S 2650mah with TowerPro H40A ESC:



APC 6x3, 21450 RPM, 25.7A at min voltage 10.8V = 277 watt.



APC 6x4, 19890 RPM, 26.2A at min voltage 10.7v = 280 watt.

Computed thrust 874g, watt out 169w, ETA 70%

3S 2650mah battery, HK 40A esc, APC 4.75x4.75 prop gives 22.5A, 250 watts.

Motor got warm but not hot after 20 seconds at full throttle. I think 35A is a bit optimistic.

A 6x4 prop that many people commenting here use will probably work well, giving less speed and more thrust.

The motor is well made, there is no play in the shaft of mine.

I had to use sandpaper on the shaft to fit my 3.2mm prop adapters (3 different ones, all slightly too tight

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

3S 2650mah battery, HK 40A esc, APC 4.75x4.75 prop gives 22.5A, 250 watts.

Motor got warm but not hot after 20 seconds at full throttle. I think 35A is a bit optimistic.

A 6x4 prop that many people commenting here use will probably work well, giving less speed and more thrust.

The motor is well made, there is no play in the shaft of mine.

I had to use sandpaper on the shaft to fit my 3.2mm prop adapters (3 different ones, all slightly too tight

this motor is a perfect buy... i purchased it for my hovercraft... the heat sink is a very good addon to the motor...

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

this motor is a perfect buy... i purchased it for my hovercraft... the heat sink is a very good addon to the motor...

Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save