Зарегистрируйтесь

Product Finder

Настройки

Useful links

Живой чат
 
[["US","AU","GB","DE"]]
Зарегистрируйтесь
Shipped From:
  • Global

KB28-57-14L 2000kv безщеточный (FIN)

KB28-57-14L 2000kv безщеточный (FIN)

Discontinued Product

Please continue searching for a similar product.
Stock:
OUT OF STOCK
Вес:
220 g
Артикул:
KB285714L(FIN)
Описание
товара

KB28-57-14L безщеточный

KB28-57-14L
Вал Размер: 3.17mm ~ 12mm
Мотор Размеры:? 28mm ~ 58mm
Вес: 205г
Kv: 2000
Ток холостого хода: .8A
Сопротивление: 0,0349
Макс Amp: 30
Размеры не включают плавники.

Product
Specifications

Дополнительная информация

  • Артикул:
    KB285714L(FIN)
  • Brand:
    Не применимо
  • Вес ( г )
    220.00
  • длина
    0.00
  • ширина:
    0.00
  • Высота:
    0.00
  • Kv ( об / об)
    2000.00
  • Max Токи (A)
    30.00
  • Мощность (Вт ):
    0.00
  • Длина В ( мм ):
    58.00
  • Может Длина D (мм )
    55.00
  • Максимальное напряжение (В )
    0.00
  • Вал А ( мм):
    3.00
  • Unit Weight (g):
    205
  • Диаметр С ( мм )
    36.00
  • Общая длина E (мм )
    70.00
  • Сопротивление ( тк ):
    0.00
Community
Discussions
Rate&
Review

Напишите ваш собственный отзыв

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
Well, it works. It looks quite pretty. But it's build quality (inside) is very poor.
It has 2 "poles" inside. Really hard to call them poles, as there are no actual metal poles, but the windings squeezed together neglectfully...
I ordered two, one does 22560 rpm, the other one 24360... If you need two to work together then I recommend using something of a better quality...
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
excellent motor, i used it with a 3s 3A 30C LiPO and with a 6s 2,2A 30C Lipo. i use this motor in a rc speed boat and i am too happy with the speed and the power. with the 3s lipo the motor only use 36Amp under load, but with the 6s i get peaks around 59Amp. i am not scared about it because i use a 100A speed controller and it never be more warm then my fingers.



PS: this motor with a 6s Lipo runs with a 40mm prop around 80km/h :P
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
This motor is very good for EDF however, you must take into account that the external diameter is not 28mm! Due to the cooling fins, the diameter is much larger. The solution is to mill the forward fins to precisely match the diameter you need. Also, be very careful not to bang the motor shaft because it is only 3.17mm and can bend easily.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
After using these motors for more than one year I can tell they still give 100%. Even with part of the fins removed to fit inside the Haoye 3" EDF, the thermal resistance is excellent. Motor runs on 4S lipos at almost 37A constant: no problems.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I used this Motor for 92mmDF.

(4S,2500mAh,21-31C))

There is splendid power in Motor.

However, the installation of the connector was insufficient.
verified_user Quality
trending_up Value
playlist_add_check Overall
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Метки товара

Используйте пробелы для отделения меток. Используйте одинарные кавычки (') для фраз.