Зарегистрируйтесь

Product Finder

Настройки

Useful links

Живой чат
 
[["US","AU","GB","DE"]]
Зарегистрируйтесь
Shipped From:
  • Global
  • USA

KB45-08XL 1600kv Brushless Inrunner

KB45-08XL 1600kv Brushless Inrunner

Discontinued Product

Please continue searching for a similar product.
Stock:
OUT OF STOCK
Вес:
600 g
Артикул:
KB45-08XL
Описание
товара

KB45-08XL 1600kv Brushless Inrunner
Kv: 1600RPM / V
Вес: 557g
Вал: 6 мм
Размер: 77x45mm
Напряжение: 36v
Самая высокая номинальная мощность: 3528W
Этот размер двигателя будет соответствовать нашим большим 5inch и 4.75inch EDF прекрасно. (такой же отверстий для крепления и размер вала)

Мы все еще ждем на заводе для более детальных данных об этих двигателей и будет обновлять этот список, как только у нас есть это.

Product
Specifications

Дополнительная информация

  • Артикул:
    KB45-08XL
  • Brand:
    Не применимо
  • Вес ( г )
    600.00
  • длина
    0.00
  • ширина:
    0.00
  • Высота:
    0.00
  • Kv ( об / об)
    1600.00
  • Max Токи (A)
    0.00
  • Мощность (Вт ):
    3528.00
  • Длина В ( мм ):
    77.00
  • Может Длина D (мм )
    75.00
  • Максимальное напряжение (В )
    36.00
  • Вал А ( мм):
    6.00
  • Unit Weight (g):
    557
  • Диаметр С ( мм )
    45.00
  • Общая длина E (мм )
    97.00
  • Сопротивление ( тк ):
    0.00
Community
Discussions
Rate&
Review

Напишите ваш собственный отзыв

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
this is the best way for waste 50usd in a low quality motor ...... crazy spent of energy and extremely hot for a motor of 600gr ..... i dont recomend buy this garbage-motor :(
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
magnet exploded after many high speed runs. great value of motor, but you will need a good cooling system to keep the heat off, i used air cooling and the motor failed but im sure with liquid cooling it be fine.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
i have this in my red cat rally 1/5 . I have heard they run hot . There is a 1/5 motor heatsink and fan i bought that also . Just running it at 6s and the current draw is 51 amps . Haven't put it through its paces yet . But if temps are reasonable I will try for 7s and 8s. Stay tuned.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Superb motor! Tested at 6S and 130Amps. Incredible power! Do not hold it for too long at full power unless you make sure this it is cooled down either by a water jacket or front and back holes on motor.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
This motor is a monster. Installed on a Traxxas Summit using the Hobbyking 150a ESC using 20t pinion 62t spur. Bash for 30 mins both esc and motor are only warm. I'm not into speed too much and this motor has plenty. This thing has so much torque and it's cheap. I used a dremmel to whittle the shaft down to 5mm. A tutorial is available on you tube to do this. Very pleased.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
The Monster is really a good buy Working in a high speed love it
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
very powerful motor but if you make this hot you burning the controler or you brake the magnet in rotor.

its good for car.

i have 3 of them broken.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Motor hat 3,5kw stimmt schon, ABER fr kurze Zeit, auf dauer sind eher 800w angesagt wegen Ueberhitzung, ausser man bohr die Schilde auf.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
grain silos for my Revo! 5S and HK150A tearing the road...http://www.youtube.com/watch?v=pXz4Qb8csGc
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I couldn't start and work this motor when i was connecting the motor to the reciver,esc and lipo there isn't any sound to program and sound?



Can anyone help me to how can i start this motor?



Thank you.
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Метки товара

Используйте пробелы для отделения меток. Используйте одинарные кавычки (') для фраз.