KD 63-20L Brushless Походный 235Kv

• Overall
• Quality
• Value

Customer Rated

Mar 18, 2014

Too sad, onece again after the NTM serie, this motor as lost magnet.

The load and speed was far away from maximum on the specs

Desapointing

• Overall
• Quality
• Value

Customer Rated

May 15, 2013

lo estoy usando en un f3a de 2x2 y anda barbaro ,tanto en potencia como consumo ,lo estoy usando con una helice apc 20/13 y un consumo de 78 A

• Overall
• Quality
• Value

Customer Rated

May 12, 2013

hola ,yo lo tengo en un f3a de 2 x 2 ,y anda una barbaridad ,tanto en potencia como consumo lo uso con una helice apc 20 / 13 y tiene de consumo 78 A .

• Overall
• Quality
• Value

Customer Rated

Sep 02, 2011

Watch out for the inevitable loose magnet(s). The motor is POWERFUL. I used it in a 2m Kanata with 3D performance swinging a 20x8 prop@3685 watts, 12s and 78amps. Magnets went loose twice and sized up the motor with deadstick landings. I got rid of this motor for a Power160 and reduced performance but RELIABLE power

• Overall
• Quality
• Value

Certified Buyer Rated

May 27, 2011

Did about 20 flights without any problem on a tug with 10S-5000mAh and prop 19x10. Powerfull to pull 4.5m gliders. But now 1 magnet loose, but I cannot remove the magnet to putt glue under it. Any suggestions to remove that magnet. What glue to use : epoxy? silicone?

• Overall
• Quality
• Value

Customer Rated

Nov 01, 2010

Can you tell me if this can handle a 18 pound ESM corsair ? I have a 200 4 stroke OS and thinking of going eletric

• Overall
• Quality
• Value

Customer Rated

Aug 26, 2010

Hi there

I use this big brushless outrunner motor in a 4,5 meter Sailplaine.The weight

is 5,5Kg.I powert it with 12 Lipos and a 17" folding prop and a sentilon HV

brushless controler.The folding prop has under full power 8400 rpm and takes

25A.High voltage and low ampere this is the way.This untit works very well

and the plain goes with 8 meter a second in to the scy.

Now i will buy another of this motor to power a 6 meter ASW27.

Other friends al

• Overall
• Quality
• Value

Customer Rated

May 28, 2010

The motor is a powerhouse on 12S using a 20X10E APC and Scentilon 100 amp ESC. I have noted no tendancy to screach. It has not gotten hot (110F max)

Using 12S 5000 mah supplied by either 3 X 4S or 4X3S 5000 Zippy 25C

Unfortunately it is having problems with retaining the magnets. I'm glueing the magnets back in as they pop free. Indications are there was not enough glue applied at the factory.

My motor is appx 1 yr old.

Buying a spare

• Overall
• Quality
• Value

Certified Buyer Rated

Mar 26, 2009

I am running this motor in a towing plane with a 20x10 APC electric -> 67 Amps static with 10S Rhino 4900 20C, 18x10 APC el. gives 53A. No issues after 40 Flights - pulls strong like a rhinozeros :). A reliable and very well performing motor!

• Overall
• Quality
• Value

Customer Rated

Oct 03, 2008

Con este motor y 12 lipos con una 20X8 mi hidro de 4 kilos va como un tiro.................................................................

Despega en dos metros y trepa vertical hasta..................................................................