New Items ФОРУМ
Зарегистрируйтесь

Итоговая цена

0,00 руб.

Cart 0 Cart 0 Loading...

Kingduino Совместимый модуль динамика зуммера

Kingduino Совместимый модуль динамика зуммера

Discontinued Product

Please continue searching for a similar product.
WANT FREE SHIPPING? Click here to find out more!


Arduino Зуммер Модуль Совместимость Speaker. Булавками к GND,
Выход / вывода цифрового ввода на S выходной контакт VCC до 3,3 ~ 5В.

Технические характеристики:
Глубина: 10 мм
Высота: 19 мм
Ширина: 16 мм
Вес продукта: 2,4 г
Рабочее напряжение: 3.3V - 5v

* Примечание: Это не оригинальный Arduino продукт бренда.

  • Артикул 438000026
  • Brand -
  • Емкость ( мАч ) -
  • вес 14.0000
  • длина 30.00
  • Width 10.00
  • Высота 15.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

I had the same experience with this as Jastra. The pin labelling seems to be incorrect. When I connected signal to (-) and ground to (S) it worked. I have no idea what the middle pin is for.

I just noticed the labelling on the photo is opposite what it is on the one I received.

I'm done with HK for arduino stuff. I typically get cheaper, better quality and more accurate product info from China sellers on fleabay.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I had the same experience with this as Jastra. The pin labelling seems to be incorrect. When I connected signal to (-) and ground to (S) it worked. I have no idea what the middle pin is for.

I just noticed the labelling on the photo is opposite what it is on the one I received.

I'm done with HK for arduino stuff. I typically get cheaper, better quality and more accurate product info from China sellers on fleabay.

Correction: If you simply put the (-) pin high (5V) and the (S) pin to ground (opposite to the product explanation) it buzzes well and pulls only about 25mA.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Correction: If you simply put the (-) pin high (5V) and the (S) pin to ground (opposite to the product explanation) it buzzes well and pulls only about 25mA.

The buzzers seem to work ok. The 5V channel seems to be unused though. Desolderd the buzzer, middle pin not connected. The (S) Signal and (-) pins are reversed. Mine only worked when I put signal on the (-) pin and ground on the (S) pin. Even with a 100Ohm resistor in series, it still pulled 50mA wich is too much for an Arduino Port. Resoldering the Buzzer 180deg would make the pins right.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

The buzzers seem to work ok. The 5V channel seems to be unused though. Desolderd the buzzer, middle pin not connected. The (S) Signal and (-) pins are reversed. Mine only worked when I put signal on the (-) pin and ground on the (S) pin. Even with a 100Ohm resistor in series, it still pulled 50mA wich is too much for an Arduino Port. Resoldering the Buzzer 180deg would make the pins right.

Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!