New Items ФОРУМ
Зарегистрируйтесь

Итоговая цена

0,00 руб.

Cart 0 Cart 0 Loading...

KINGKONG 260 FPV Гонки Дрон штепсельной вилки & Play (красный)

KINGKONG 260 FPV Гонки Дрон штепсельной вилки & Play (красный)

Discontinued Product

Please continue searching for a similar product.
SKU:
426000028-0
WANT FREE SHIPPING? Click here to find out more!

Команда KINGKONG сделали это снова. Используя свой популярный кадр 260 FPV они добавили большой пакет передач, чтобы сделать отличную подключи и играй пакет в комплекте с FPV камеры и видео TX.

Этот Мультикоптер питается от ведущего комплекта оборудования KINGKONG Force 200 Мультикоптер. Набор имеет все необходимое из предварительно настроенным мини-CC3D контроллер полета, чтобы вплоть до Spironet антенны.

Двигатели KINGKONG 2204-2300KV (CW и CCW) Работает на KINGKONG 12А OPTO BLHeli ESC-х. С UBEC (5v 3A) мощности к PDB. 6040 пропеллеры оживится свой темп.

Существует предустановленный FPV камера и видео TX так что просто настроиться на канал и получить полет. Камера FPV расположена под углом, так что вы видите, где вы собираетесь, когда гонка.

Просто чтобы убедиться, что ваши конкуренты знают, где вы есть супер яркие светодиодные полосы на задней панели, так как это будет только часть они будут видеть.

Это захватывающая упаковка не только выглядит часть, но даст вам часы удовольствия гонок по правильной цене.

Особенности:
• Полностью формованные цельным армированный стекловолокном шасси
• KINGKONG 2204-2300KV Motors (CW и CCW)
• KINGKONG 12А 2-4S ОРТО BLHeli ESC-х
• KINGKONG 5V-3A UBEC
• Питание и видео распределительный щит с XT60
• Mini CC3D контроллер Flight
• 6040 пропеллеры (CW и CCW)
• FPV камера CMOS 1000TVL
• 200mW 5.8GHz аудио / видео передатчик
• 5.8GHz с круговой поляризацией Spironet антенны
• Действие Крепление камеры
• Супер яркий светодиодный модуль (Убедитесь, что ваш конкурент знает, что это ты за принятие их!)

Рамка Технические характеристики:
Колесная база: 260мм
Вес: 138g (голый кадр)
Материал: нейлон + волокно

Моторные функции:
KV (RPM / V): 2300KV
Напряжение: 7.4-14.8V (2-4S LiPoly)
Макс Thrust: 440г
Количество полюсов: 12N / 14P
Пропеллер: 5 "-6"
Опора вала: 5мм
Вал двигателя: 3 мм
Диаметр: 28мм
Длина: 31.2mm
Вес: 26г
Расстояние отверстий: 16мм или 19мм M3

ESC Технические характеристики:
Входное напряжение: 7.4-14.8V (2-4S LiPoly)
Постоянные: 12 Ампер
Взрыв: 20 Ампер (5с макс.)
BEC: Нет BEC, только ОРТО
Размеры: 50x16x6mm
Вес: 7,5 г (с проводами)

UBEC Технические характеристики:
Входное напряжение: 6V ~ 28V / DC (2-4S LiPoly)
Выходное напряжение: 5V
Пульсация: Константа: 3 амперах
Размеры: 53x17x7mm
Вес: 12г

Характеристики камеры:
Формат: PAL
ТВЛ: 1000
Датчик: CMOS
Тип объектива: F2.0 / 2.8mm (IR-CUT)
Входное напряжение: 5 ~ 12 В постоянного тока
Угол обзора: 120deg

Видео TX Технические характеристики:
Модулируйте: широкополосная ЧМ модулирует
Формат видео: NTSC / PAL
Выходное сопротивление: 50 Ом
Выходная мощность: 23 ~ 24dBm
Канал: 32ch
Рабочее напряжение: 7V ~ 24V
Ток питания: 190mA
Рабочая температура: -10 ~ 85
Видео Ширина полосы: 0 ~ 8,0 МГц
Аудио Несущая частота: 6.5MHz
Видео Уровень входного сигнала: 0.8 ~ 1.2 Вразмах
Видео Входной импеданс: 75 Ом
Уровень Audio Input: 0.5 ~ 2.0 Вразмах
Аудио Входное сопротивление: 10K Ом
Разъем: RP-SMA
Размеры: 40 х 23 х 8 мм
Вес: 10 г (без антенны)

Каналы:
Группа A: 5865, 5845, 5825, 5805, 5785, 5765, 5745, 5725
Группа B: 5733, 5752, 5771, 5790, 5809, 5828, 5847, 5866
Группа E: 5705, 5685, 5665, 5645, 5885, 5905, 5925, 5945
Группа F: 5740, 5760, 5780, 5800, 5820, 5840, 5860, 5880

Включает:
1 х KINGKONG 260
20 х 6040 Pros (10CW + 10CCW)
1 х Spironet Антенна
1 х ESC адаптер коммуникационного программного обеспечения PC
1 х Действие Cam смоченную крепление
1 х кабель упаковка
1 х кабель галстук пакет
1 крепление х антенна комплект
1 х USB кабель

Необходимые:
5-6 канальный RX / TX
1300-2200mah 11.1V; 1000-1800mah 14.8V

  • Артикул 426000028-0
  • Brand -
  • Емкость ( мАч ) -
  • вес 969.0000
  • длина 360.00
  • Width 70.00
  • Высота 280.00
  • chasing planes @ pemac
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

What can i say,i am blown away by this quad. Having moved into this side of the hobby, i didn't want to spend a lot but i must say this performs like a much more expensive model. Had trouble hooking into Librepilot till i found an incorrect driver on my computer. Once that was sorted i was able to set this up using the Hobbyking FPV Racer profile.It's on bank one at the moment but as a noobie it's perfect, stable and responsive. If you are trying this sport for the fist time, you can't go wrong with this quad, top marks Hobbyking, definitely a winner.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

What can i say,i am blown away by this quad. Having moved into this side of the hobby, i didn't want to spend a lot but i must say this performs like a much more expensive model. Had trouble hooking into Librepilot till i found an incorrect driver on my computer. Once that was sorted i was able to set this up using the Hobbyking FPV Racer profile.It's on bank one at the moment but as a noobie it's perfect, stable and responsive. If you are trying this sport for the fist time, you can't go wrong with this quad, top marks Hobbyking, definitely a winner.

Fun quad!! This is my first racing quad, and although a little nervous about how to set everything up it turned out to be very straight forward. I downloaded the Libre-Pilot GCS software (available at: https://librepilot.atlassian.net/wiki/display/LPDOC/Downloads), and prebound my Spektrum satellite receiver with a primary receiver instead or going through the painful binding process. Once bound you plug your satellite receiver into the front left port and go through the Libre-Pilot wizard to setup and calibrate. It's that simple. Video worked great and aircraft flies awesome.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Fun quad!! This is my first racing quad, and although a little nervous about how to set everything up it turned out to be very straight forward. I downloaded the Libre-Pilot GCS software (available at: https://librepilot.atlassian.net/wiki/display/LPDOC/Downloads), and prebound my Spektrum satellite receiver with a primary receiver instead or going through the painful binding process. Once bound you plug your satellite receiver into the front left port and go through the Libre-Pilot wizard to setup and calibrate. It's that simple. Video worked great and aircraft flies awesome.

Very good racer for price.
If you are starting with fpv racer it's a good choice.

Here a video of my first flight with a fpv (and my kingkong by the way) :

https://www.youtube.com/watch?v=gTBqk9C_GM8

Very cheap and easy to repair !

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Very good racer for price.
If you are starting with fpv racer it's a good choice.

Here a video of my first flight with a fpv (and my kingkong by the way) :

https://www.youtube.com/watch?v=gTBqk9C_GM8

Very cheap and easy to repair !

great frame for beginners and pricingonly problem is when you break a arm you have to pull it ll apart and does get a bit annoying after 2 or 3 crashes

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

great frame for beginners and pricingonly problem is when you break a arm you have to pull it ll apart and does get a bit annoying after 2 or 3 crashes

wow this thing is alot of fun

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

wow this thing is alot of fun

great quad .
it took some time to to make it fly with my aurora 9 system but at the end it's flying.
the tx is bul......
the quad fly fast and you find yourself loosing video very fast.
lucklly i found it lost in the fields only with the rear red light.
order fatshark 400mw tx for the future flights.
ilan

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

great quad .
it took some time to to make it fly with my aurora 9 system but at the end it's flying.
the tx is bul......
the quad fly fast and you find yourself loosing video very fast.
lucklly i found it lost in the fields only with the rear red light.
order fatshark 400mw tx for the future flights.
ilan

I recently got these at what was a great price and now they are even lower. I was skeptical at first but apparently these got a bad rep for reasons I don't experience. I did receive 1 that the rear LED bar was shorted out of the box and smoked out even with a smoke stopper installed. Good thing I ordered 2 sets of frames which came with and extra light bar. The original got so hot it popped a LED off. The other thing. This was my first time using a CC3D FC and it was a total nightmare to get it flashed and going as I wanted it.
Now for the rest of the story. I am truly impressed so far. Much like their props that have saved me tons of money, these 260 class UAV's are a fantastic value at their current price. Are there areas I modified before the first flight? You bet! Some like the vtx zip tie needed a bit of help. The antenna needed put through the rear hole and then supported by plastic mold or one could use hot glue. There are things they could have done better IMHO but again ... Try to build one half as good for the money. I found it impossible.

Unless it develops some kinda voodoo and flies apart, next few times out, I call it a winner in many ways. Or at the very least a sleeper value.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I recently got these at what was a great price and now they are even lower. I was skeptical at first but apparently these got a bad rep for reasons I don't experience. I did receive 1 that the rear LED bar was shorted out of the box and smoked out even with a smoke stopper installed. Good thing I ordered 2 sets of frames which came with and extra light bar. The original got so hot it popped a LED off. The other thing. This was my first time using a CC3D FC and it was a total nightmare to get it flashed and going as I wanted it.
Now for the rest of the story. I am truly impressed so far. Much like their props that have saved me tons of money, these 260 class UAV's are a fantastic value at their current price. Are there areas I modified before the first flight? You bet! Some like the vtx zip tie needed a bit of help. The antenna needed put through the rear hole and then supported by plastic mold or one could use hot glue. There are things they could have done better IMHO but again ... Try to build one half as good for the money. I found it impossible.

Unless it develops some kinda voodoo and flies apart, next few times out, I call it a winner in many ways. Or at the very least a sleeper value.

I really really wanted to like this quad. Almost everything is perfect for a beginner who doesn't want to learn how to design/build them all themselves, except the frame. The frames are so fragile its not funny. What are you going to do when you start out? Crash. I bought this kit, and the 2 replacement frame kit and I have already broken two frames from only light crashes. The worst part is that the weak point of the frame is near the motor, so when the frame breaks it tears the motor off the ESC, destroying the motor. This means I have had to replace the motors as well.

Every other component on the quad works really well and is value for money. Since the price has been dropped so much since I purchased it a few weeks ago it might actually be worth buying this for parts. I will continue to use the FPV camera and transmitter, motors, ESCs, FC, and props, but I will be transferring them over to a carbon fiber frame. Don't skimp on the frame like I did. Save money on any other component.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I really really wanted to like this quad. Almost everything is perfect for a beginner who doesn't want to learn how to design/build them all themselves, except the frame. The frames are so fragile its not funny. What are you going to do when you start out? Crash. I bought this kit, and the 2 replacement frame kit and I have already broken two frames from only light crashes. The worst part is that the weak point of the frame is near the motor, so when the frame breaks it tears the motor off the ESC, destroying the motor. This means I have had to replace the motors as well.

Every other component on the quad works really well and is value for money. Since the price has been dropped so much since I purchased it a few weeks ago it might actually be worth buying this for parts. I will continue to use the FPV camera and transmitter, motors, ESCs, FC, and props, but I will be transferring them over to a carbon fiber frame. Don't skimp on the frame like I did. Save money on any other component.

Excellent racing quad for this price range! Flies really good and is a awesome racing quad for beginners. Be aware though; there are no documentation at all in the box, so you'll have to spend some time getting to know it.

Couple of tips:
1. Download LibrePilot to set the quad up. Just use the vehicle setup wizard, and then the transmitter setup wizard afterwards and you should be good to go!
2. If you're using the taranis with the X8R module and want to use your SBUS-port, you get a cable in package that fits in the main port (the one in the back, on the right hand side of the FC), and that has 4 pins on the other end. From the outer side of the SBUS-port, you want to plug in the black wire, the red wire and then the yellow wire. You don't have to use the green wire, just hide it in the quad (or cut it w/e).

But all in all, a great quad at a great price :)

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Excellent racing quad for this price range! Flies really good and is a awesome racing quad for beginners. Be aware though; there are no documentation at all in the box, so you'll have to spend some time getting to know it.

Couple of tips:
1. Download LibrePilot to set the quad up. Just use the vehicle setup wizard, and then the transmitter setup wizard afterwards and you should be good to go!
2. If you're using the taranis with the X8R module and want to use your SBUS-port, you get a cable in package that fits in the main port (the one in the back, on the right hand side of the FC), and that has 4 pins on the other end. From the outer side of the SBUS-port, you want to plug in the black wire, the red wire and then the yellow wire. You don't have to use the green wire, just hide it in the quad (or cut it w/e).

But all in all, a great quad at a great price :)

A brilliant little quad, well built, good components and well finished. The camera and VTX are good and should be more than okay for close fpv racing/flying. The motors are powerful and pair nicely with the ESC's. The frame is very strong/sturdy and the PDB is also very good and nicely incorporated into the frame. The flight control board is okay, i would say it has some limitations as it is a CC3D and I don't know how long the support will last for openpilot but it can be swapped out at a later date. It is more than enough for beginners/intermediate flyers such as myself.

To flash the board you will need openpilot 15.2 (just go to openpilots website) plug it in and it has a set up wizard that makes it all really easy. Of course you will need to have a radio and spare receiver too. Overall really happy with this purchase but I would say you would need some existing experience with quads/openpilot.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

A brilliant little quad, well built, good components and well finished. The camera and VTX are good and should be more than okay for close fpv racing/flying. The motors are powerful and pair nicely with the ESC's. The frame is very strong/sturdy and the PDB is also very good and nicely incorporated into the frame. The flight control board is okay, i would say it has some limitations as it is a CC3D and I don't know how long the support will last for openpilot but it can be swapped out at a later date. It is more than enough for beginners/intermediate flyers such as myself.

To flash the board you will need openpilot 15.2 (just go to openpilots website) plug it in and it has a set up wizard that makes it all really easy. Of course you will need to have a radio and spare receiver too. Overall really happy with this purchase but I would say you would need some existing experience with quads/openpilot.

Customer files
Manual Download [2]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!