The Kopis 1 is a high-performance pre-assembled FPV racing drone unlike any other! The Kopis combines some of the latest and greatest tech in its field, Including; Kakute F4 FCU, Betaflight OSD, 40 Channel Atlati VTX, Betaflight Controllable LED board and a RunCam Swift Mini FPV camera!
The Kopis 1’s low-deck design means it has centralized mass and superior handling.
The Stretched-X motor layout is the choice of top racers as the rear props are further from the "dirty air" produced by the front props. The result is smoother cornering and improved top speeds. The FPV antenna is in a unique location behind the quad and is mounted to the Video Tx with an MMCX type connector which only improves the overall durability of the antenna.
The Kakute flight controller and Atlatl video transmitter give perfectly integrated control of the quadcopters systems as you can adjust your Video Tx channel and transmitting power directly from the OSD using your transmitter sticks, which means no more button pushing!. The AIR 40/2450kv
T Motors’s give you a great balance of raw speed and improved flight times, the T Motors won't kill your batteries either!
Unlike most of the ready built race drones The Kopis 1 is fitted with a good quality RunCam Swift Mini FPV camera that has an excellent reputation within the drone racing community and is a great fit In The Kopis 1. The camera mount allows you to adjust the camera angle from 0-90 degrees.
The Kopis 1 delivers all the performance, looks, and durability of a hand-built machine, without ever having to pick up a soldering iron!
• Highly durable 5mm full 3k carbon fiber
• KakuteF4 flight controller with soft-mounted gyro for excellent vibration prevention
• Monitor voltage / battery capacity with the built-in Betaflight OSD
• Atlatl video 5.8 GHz Transmitter with Standard 40 channel set
• Adjustable Video Transmitter power 0.5 (Pit Mode), 25, 100, 200, 400, 600mW
• Super tough MMCX antenna connector for easy, secure connectivity
• Betaflight controllable / programmable LED board with built-in low voltage alarm
• Pre-installed RunCam Swift Mini FPV camera
• Adjustable camera angle 0 to 90 degrees
• Serial receiver supported (SBUS, iBUS, Spektrum)
Frame Diameter: 210mm
Frame Material: 5mm Carbon Fiber
MCU: STM32F405RGT6 32-bit processor
IMU: ICM20689 (SPI)
Motors: T MOTOR AIR 40/2450kv
VTX Power: 0.5 (Pit Mode), 25, 100, 200, 400, 600mW
ESC’s: 30 amp BLHeli_32 (Dshot1200 compatible)
Input Voltage: 4S-6S battery (motors are optimized for 4S)
Camera: 1/3” 2.3mm lens
Weight: 300g (without battery / Betaflight OSD)
Input Voltage: 2-6s (7.4-22.2v)
1 x KOPIS FPV racing drone
1 x 5.8 GHz FPV antenna
8 x 5045 tri-blade propeller
1 x Battery strap (installed)
1 x Gopro4 mount
Емкость ( мАч )
Вес ( г )