Holybro Kopis 2 FPV Racing Drone (PNF) without receiver

The Holybro Kopis 2 is a high-performance ready-to-race FPV drone. It comes in a stretched-X format for superior cornering and top speed. The low-deck design keeps the mass centralized for better handling. It runs on 5inch propellers.

High-speed control is provided by a Kakute F7 flight controller running Betaflight. This combined with the Atlatl HV V2 video transmitter gives perfectly integrated control of all quadcopter systems. Awesome power is provided by TMOTOR F40 Pro-II 2400kv motors combined with DALPROP Cyclone T5046C propellers. Excellent image quality is provided by the RunCam Micro Swift FPV camera. You will need to install a radio and receiver combination.

The Holybro Kopis 2 is a performance package which is ready to go with little setup.

Features:
• 5mm full 3k carbon fiber twill
• Counter-sunk screws on base for great appearance and protection of battery against damage
• KakuteF7 flight controller with soft-mounted gyro for mechanical filtering of vibration
• Improved soft-mounting foam for KakuteF7 gives an optimal balance of stiffness and damping for
even better gyro performance than before!
• Betaflight OSD included. Monitor voltage and battery capacity in your FPV goggles. Change PIDs
and Rates using your transmitter sticks
• Atlatl HV V2 video transmitter (5.8GHz, 40CH, 25mW, 200mW, 500mW, 800mW)
• Buzzer included
• RunCam Swift Micro FPV camera
• Adjustable camera tilt from 0 degrees to 90 degrees
• Serial receiver supported (SBUS, iBUS, Spektrum). Legacy PPM and PWM receivers not supported.

Specs:
MCU: STM32F745VGT6 32-bit processor
IMU: ICM20689 (SPI) 32 kHz capable
Barometer: BMP280
TF card for Blackbox logging
Motor: Tekko32 BLHeli_32 4-in-1 ESC (Dshot1200 compatible)
ESC: Tekko32 4-in-1 35A
Propellers: Dalprop Cyclone 3-blade T5046C
Video Transmitter: Atlatl HV V2 Vtx board
Camera: RunCam Micro Swift
Weight: 299g without battery or props

Requires:
4 Channel Radio / Receiver system
4S~6S motors optimized for 4S