Become a Dealer Блог
Зарегистрируйтесь

Итоговая цена

0,00 $

Корзина 0 Корзина 0 Loading...

L-39 Albatros EPO 90мм Jet АРФ

Generating Links

L-39 Albatros EPO 90мм Jet АРФ

 
Цена:

Now save сохранить 0,00 $ 0,00 $

153,23 $
Отправлено из:
  • Global
Уже купили Discontinued Product

Please continue searching for a similar product.
1 year warranty
Артикул:
L-39-ARF-SERV
Хотите бесплатную доставку? кликните сюда Узнать больше!

L-39 Albatros была разработана в Чехии в качестве легкого нападения и учебно-тренировочных самолетов. Считается, что примерно 2800 из Л-39 воздушного корабля Albatros все еще в обслуживании сегодня.

Обладая большой 90mm EDF блок и мощный 3660-1600kv вентилируемые бесщеточный Inrunner этого большого масштаба EPO струи будет звучать так же хорошо, как она выглядит. 6 лезвий EDF устройство поставляется с двигателем, предварительно установленным для легкой установки. 5 х предустановленные 8g 1.8кг сервоприводы крутящий момент обрабатываются управляющие поверхности и рулевом колесе носа. Фиксированные стойки шасси также включают в себя рабочую подвеску и добавляет к масштабу внешний вид и Л-39. Все, что требуется для завершения модели является 22.2V 4400mah 6S Lipo и собственный передатчик и приемник (Tx / Rx). Законченный в аутентичном Чехия Air Force цветовой схеме L-39 Albatros сделает впечатляющее дополнение к вашему истребительных squadren.


Спецификация:
Размах крыла: 1192mm
Высота: 405мм
Длина: 1520мм
Площадь крыла: 35dm2
Аэродинамический: RG-14
EDF Единица измерения: 90мм - 6 лезвие ( в комплекте)
Двигатель: 3660-1600KV вентилируемые Бесщеточный Inrunner ( в комплекте)
Сервопривод: 5 х 8g ( в комплекте)

Необходимые:
ESC: 60A
Батарея: 22.2V 4400mah 6S Lipo
Ваш собственный Tx / Rx

Загрузить видео

Для загрузки видео необходима регистрация войти в систему или Зарегистрируйтесь

Темы
Сортировать по
Самые последние темы
* Псевдоним пользователя:

* Ваш ответ:


Пожалуйста, введите текст, показанный на картинке, в поле ниже
*Код верификации:
Отменить
Отправить
Опубликовать новую тему
* Псевдоним пользователя:

* Ваша тема:



Пожалуйста, введите текст, показанный на картинке, в поле ниже
*Код верификации:
Опубликовать тему

Для того, чтобы оставлять отзывы, необходимо зарегистрироваться войти в систему или Зарегистрируйтесь

g00seman | Проверенный покупатель

  • Overall
  • Quality
  • Value

Customer Rated

Jun 11, 2014

Update since its been flown.
I went with a changesun 12 blade fan and the dr mad thrust 1600kv 6s1p motor
this is deffintely my favourite jet.
it is fast,smooth to fly and with this setup a 5000mah 6s1p pack is perfect to balance the model, I have beefed up the wing with a 8mm carbon spar and glassed with epoxy the fuz join. I have installed decent electric retracts with beefed up mounts.
This model doesnt need retracts though as on this setup it flies out your hand and on the cs fan it has a sweet sound, recommend anyone to buy this model, i have just bought a second one now they back in stock, as a spare:)

Gooseman

g00seman | Проверенный покупатель

  • Overall
  • Quality
  • Value

Customer Rated

Mar 01, 2014

Right, i havent done a bad review but this is a half hearted one.
The massive box arrived and after i had opened the box straight away i saw it.
this model had travelled and looked worse for the wear.
some arbotory HK sticker on the tail crooked.
every sharp point on the model needs straightening
the paint is rubbed off in several places so the airbrush will have to fix that
i have decided from what i have read the supplied motor/fan is not up to the task so i will be upgrading to possibly a 8s setup
The build is easier enough, but the main fuz join deff requires beefing up.
i think once i have painted it again i will give it a clear coat to protect it better

Flight report to be posted when its warm again:)

Gooseman

Carmine | Проверенный покупатель

  • Overall
  • Quality
  • Value

Customer Rated

Mar 19, 2013

Received in only four days at home. Bigger then I suppose in web site.

good quality . I have used a HK 125A ESC end external SBEC 8A, because I have 8 servos (size 9gr) plus retract gears.



It fly very well with 3700mhA zyppy compact because it is only 2520gr weight. I have apply flaps so I can make very slow handing.



I suggest it as first edf JET.



Marco.

sonicnz | Проверенный покупатель

  • Overall
  • Quality
  • Value

Customer Rated

Nov 03, 2012

great plane and so easy to fly, one suggestion though - don't assemble the wheels and throw it then land on grass

little_drifter | Проверенный покупатель

  • Overall
  • Quality
  • Value

Customer Rated

Oct 01, 2012

Plane came double boxed, when I took the parts out many had dents and dings in them, nothing major but disappointing.

The plane went together easily and didn't take long. The motor was installed in the EDF unit already and seems well balanced.

I had the maiden flight on the plane yesterday and it fly's very nicely. ITs easy to fly and has a good roll rate. The plane isnt that fast, but this can be fixed with the 12 blade, 1000kv EDF unit I have here! :)

The only bad point of this plane is the landing gear is horrible, they bend very easily. I had 4 landings yesterday and all well smooth and not hard touch downs, but on each landing the struts bent. Also one wheel seized up.

All in all I am happy with this plane and I would recommend it to others. I would also buy another if i smash this one.

5/5

cz-radek | Проверенный покупатель

  • Overall
  • Quality
  • Value

Customer Rated

Mar 30, 2012

Just got one last month. First thing i noticed - the frame of plane was damaged with little wholes in the body of plane. I thing post office is responsible for this but it was too damn good packed so i dont know.

2) the servo of one of elevator wings is reversed. You must cut it of and turn it 180 degrees.

3) The landing gear is made for retractableing. But there is no retractableing mechanism included, even it is not in required things!

But never mind you can buy it here:

http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=12667

4) Parts are pretty easy to assemble, but glue is not good enough so think on it when you will be buying this model and order some stronger like cyanoacrylate for EPP.

5) Battery bay is not well resolved. But with a little skill you can do it better :)

6) Ower this all It is a damn good looking airplane and for very good price. Im soooo excitet to fly with that thing! And SORRY FOR MY ENGLISH guys. Thans! :)

Dix_Fix | Проверенный покупатель

  • Overall
  • Quality
  • Value

Customer Rated

Sep 01, 2011

I got my L-39 Albatros 2 days ago & proceded to check everything out. The packaging for transport was great (from the outside).

Upon opening the box it all was very well placed in the box etc, the problem I found was the packaging Q.C. at the makers , is well shall we say a bit slack.

1)The top of my tail was broken off, from where the packing person had missed when heat sealing that particular bag.

2) The wheel mounting brackets were all loose. They are actually retract bases (with none of the electronics or motors so they are fixed/retracts) If you wish to put the rest of the retract gear in you can order it from HobbyKing PRODUCT ID: HKS-1106 (Under $40)

3)The motor's cone had been overtightened & split. The motor itself was loose in its fan mounting.

4)The fan was rubbing

5)The hinges are a complete joke IMHO



HEY what is with the NO RUDDER. Im new to jets but this thing has no tail servo the rudder is fixed, Before writing I did check theo REAL L-39 & they definatly have a rudder. I'm going to mount a servo into the tail itself & cut the rudder free & hinge it. I will post any mods I do in the discussion section.



Dont get me wrong!!! At the price.... I LOVE this plane....

Ivor | Проверенный покупатель

  • Overall
  • Quality
  • Value

Customer Rated

Aug 15, 2011

Maidened the big bird today... Running a Lander 90mm EDF and 3675Kv motor with HobbyWing 100A-ESC...Its a big pussycat on 6S happily & scale-fully leaping into the sky at the end of a 50 meter run... Its no speed demon on 6S with no nasty habbits or tendencies so am going to try 7S ... In stock set-up I have had to add 175g of lead into the nose-cone running a 640gm Nano-Tech 6s 4000MaH Li-Po or Turnigy 6S 3000Mah...

If connected in series I can run both 4S & 3S @ 4000Mah at around 900 gm which means my 175gm in nose will need to be halved to 80 to 90gm and added to tail for rough CoG ( better nose heavy than tail is the rule ) ...

Im really happy this ship performs so nicely, I put a bit of work into it so was quite anxious...Now all I can think about is maybe getting a Wemotec 90mm running 8s and this thing will HONKY-TONK !



( still stand by my last post of buying the ARF and starting from scratch )

EAX 123 | Проверенный покупатель

  • Overall
  • Quality
  • Value

Customer Rated

Jul 13, 2011

listen guys

the retracts you need for this are the HKS-1106

available here at 39.99$ .the are the original manufactures`s upgrade

Buzzard | Проверенный покупатель

  • Overall
  • Quality
  • Value

Customer Rated

May 19, 2011

Mine arrived today. WOW! What a great edf jet. Looks great, retracts work well. It is bigger than I thought it would be. Some loose screws in the edf unit but a little locktite fixed this. Can't wait to fly it. Just waiting for the weather to improve on my days off work.

  1. 1
  2. 2
Файлы клиентов
jetcat p20 Download [1548]
No File Name Download [1329]
L-39 Bell Ville Download [1227]
alu gear mod1 Download [886]
alu gear mod2 Download [828]
3D inlet guidance epo Download [829]
L-39 manual Download [2419]
My L-39's Download [6654]
No File Name Download [6654]
No File Name Download [4114]
  1. 1
  2. 2
Загрузить файл

Зарегистрируйтесь, чтобы загружать файлы.
пожалуйста войти в систему или Зарегистрируйтесь Начните помогать коллегам по хобби!