New Items ФОРУМ
Зарегистрируйтесь

Итоговая цена

0,00 руб.

Cart 0 Cart 0 Loading...

Laser230 FPV Дрон Композитный комплект (230мм)

Laser230 FPV Дрон Композитный комплект (230мм)

Shipped From:
  • Global
QTY:

Now save сэкономь 0,00 руб. 0,00 руб.

1 636,10 руб.
Статус:
Есть в наличии
SKU:
366000017-0
WANT FREE SHIPPING? Click here to find out more!

Laser230 является все композитный строительный 230мм дерево обниматься FPV гоночных дрон. Laser230 имеет то, что называется чистой и грязный систему, которая использует вибрацию наперстки, чтобы изолировать двигатель и проп вибрации от FC и камеры. Чистый и грязный система позволяет запускать туже PID-и имеют Желе бесплатное видео FPV сессии.

Опорных рычагов крепления электродвигателя от 16x19mm и 12мм расстояния. Максимальный размер опоры является 5inch и идеально подходит для класса двигателей 1704 ~ 2206. Прочный композитный строительный поставляется с большим количеством положений для крепления и ремни, что делает установку оснастки. Рама имеет 8 наперстки колебаний для изоляции, а также новую перспективную FPV для монтажа камеры между кадрами. Laser230 имеет некоторые гладкий внешний вид с горячим красный анодированный алюминий тупиков и прохладной матовой отделкой, что делает этот большой небольшой четырехъядерный, чтобы пронестись вокруг вашего локального сайта полета.

Особенности:
• Композитный строительство
• Широкий ассортимент моторных и энергетических вариантов
• Большая рамка вторичной виброизоляция больше места и упрощения размещения
• Компактный размер для близости летающих вокруг препятствий

Технические характеристики:
Колесная база: 230мм
Вес: 180г
Высота: 82мм с шасси и центральной клетки

Необходимые:
4 х Motors 1506 ~ 2208
1 х батареи 800 ~ 1300mAh 7.4 ~ 11.1V (2 или 3 клетки LiPoly)
4 х пропеллеры до 5in
4 х ESC в 7 ~ 12A
1 х контроллер Flight Multi-ротор
4ch радио (6ch рекомендуется для FPV и использования FC)
FPV передач (опционально)

  • Артикул 366000017-0
  • Brand Unknown
  • Емкость ( мАч ) -
  • вес 247.0000
  • длина 210.00
  • Width 30.00
  • Высота 100.00
  • FPV250 Low Hung
  • Added heli landing gear to offer the battery some protection.
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

good frame for the price. flies well but a bit heavy (180g)

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

good frame for the price. flies well but a bit heavy (180g)

Frame seems sturdy for composite structure and leaves some room for modification. However 5" propose are very tight fits, don't think you can put 6" somehow on this thing.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Frame seems sturdy for composite structure and leaves some room for modification. However 5" propose are very tight fits, don't think you can put 6" somehow on this thing.

Not a bad frame at all, great price too. There is no instructions but, it is really straightforward. I am concerned about the arm mounts at it is only 2 screws holding it, may break the arm in a crash. I have not seen any replacement parts for this one anywhere.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Not a bad frame at all, great price too. There is no instructions but, it is really straightforward. I am concerned about the arm mounts at it is only 2 screws holding it, may break the arm in a crash. I have not seen any replacement parts for this one anywhere.

Excellent frame. No complaints at all. Highly recommended.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Excellent frame. No complaints at all. Highly recommended.

Okay, This frame is cheap and looks good. But out of 2 sets of motors only one fits. spacing on mounts fit multistars but not emax. 1806 motors cant Clear the bottom plate of the frame while on flight. i would not get this again i enjoy my fov250 and Qav 250 more.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Okay, This frame is cheap and looks good. But out of 2 sets of motors only one fits. spacing on mounts fit multistars but not emax. 1806 motors cant Clear the bottom plate of the frame while on flight. i would not get this again i enjoy my fov250 and Qav 250 more.

Good value and quality is nice however the clean/dirty design is a fatal weakness. Any minor crash results in separation of the two parts which will likely snap a few of the ESC wires too.

Nice idea but I'm going to replace the frame with a carbon mini-blackout clone.

As a side note mine weighed in at 550g with 3S2200mah and FPV gear (but no gopro/mobius). Feels a bit slugish with 1806-2300kv.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Good value and quality is nice however the clean/dirty design is a fatal weakness. Any minor crash results in separation of the two parts which will likely snap a few of the ESC wires too.

Nice idea but I'm going to replace the frame with a carbon mini-blackout clone.

As a side note mine weighed in at 550g with 3S2200mah and FPV gear (but no gopro/mobius). Feels a bit slugish with 1806-2300kv.

high quality, nice design.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

high quality, nice design.

Ok bought this to just have something better than the FPV250 sold here with the one solid frame for like 9 bucks. It's a nice frame clean all the bolt holes lines up and lots of hardware to. It is a little heavy but then it's a 4 plate frame, I was able to place my 12amp escs between the botom 2 plates for a nice clean look . The arms are a little weak but not broke them just can bend them some but its a good looking and feels as good as some of my more expensive frames . The rubber grommets holding the bottom fraam to top half are a little soft and loose so make sure use small zip ties to keep it from popping apart on crash or in flight. I placed a CC3d flight board on mine with Sunnysky 2204-16 2300kv motors and 12amp escs 5030 tri props and std props with a Mobus cam and 700tvl fpv camera and 250watt Bosscam transmitter and 1500 25/50c batt total weight loaded is 630 grams. flies 7 minutes.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Ok bought this to just have something better than the FPV250 sold here with the one solid frame for like 9 bucks. It's a nice frame clean all the bolt holes lines up and lots of hardware to. It is a little heavy but then it's a 4 plate frame, I was able to place my 12amp escs between the botom 2 plates for a nice clean look . The arms are a little weak but not broke them just can bend them some but its a good looking and feels as good as some of my more expensive frames . The rubber grommets holding the bottom fraam to top half are a little soft and loose so make sure use small zip ties to keep it from popping apart on crash or in flight. I placed a CC3d flight board on mine with Sunnysky 2204-16 2300kv motors and 12amp escs 5030 tri props and std props with a Mobus cam and 700tvl fpv camera and 250watt Bosscam transmitter and 1500 25/50c batt total weight loaded is 630 grams. flies 7 minutes.

I've bought a Laser230 and I disappointed with it. 5X3 propellers can't fit of this frame the arms are shorter than normal. I made new arms for this but now it looks like a mule. I'm looking for a proper 250 size frame somewhere.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I've bought a Laser230 and I disappointed with it. 5X3 propellers can't fit of this frame the arms are shorter than normal. I made new arms for this but now it looks like a mule. I'm looking for a proper 250 size frame somewhere.

The kit is OK and despite the arms being of the same, fairly thin material as the rest, my quad with "Baby Beast" motors and HK carbon 5030 props survived a pretty impressive scratch with no damage at all. The vibration dampening design is a joke though. Make the frame rigid by using nylon bolts & spacers through the 8 bolt holes next to the dampening balls instead or you get crazy shakes. Dampening is only needed for a small camera platform. For the money, it is great choice though.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

The kit is OK and despite the arms being of the same, fairly thin material as the rest, my quad with "Baby Beast" motors and HK carbon 5030 props survived a pretty impressive scratch with no damage at all. The vibration dampening design is a joke though. Make the frame rigid by using nylon bolts & spacers through the 8 bolt holes next to the dampening balls instead or you get crazy shakes. Dampening is only needed for a small camera platform. For the money, it is great choice though.

  1. 1
  2. 2
Customer files
laser230 pdb Download [1597]
Laser230 RTF Download [1283]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save