New Items ФОРУМ
Зарегистрируйтесь

Итоговая цена

0,00 руб.

Cart 0 Cart 0 Loading...

LT200 5.8GHz 200mW 32 канала FPV A Измерительный преобразователь / V

LT200 5.8GHz 200mW 32 канала FPV A Измерительный преобразователь / V

Shipped From:
  • Global

Now save сэкономь 0,00 руб. 0,00 руб.

1 159,54 руб.

We are sorry, this product is not available in your country

Статус:
Нет в наличии!
SKU:
640000004-0
WANT FREE SHIPPING? Click here to find out more!

LT200 микро размера высокой мощности передатчик видео упаковка 200mW ультра-чистой 5.8GHz власти в крошечное единицу.

Микро передатчик имеет 32 доступных каналов в диапазоне 5.8GHz и весит под 7g, что делает его отлично подходит для мини и микро каре и т.д. Это идеально подходит для высоких требований 250 FPV гонок, где чистая, мощная система имеет важное значение.

TX поставляется с DIY видео кабель и пользовательского жгута проводов с разъемами Mini Molex для штекера и совместимости играть с аналогичным оборудованных камерами. LT200 имеет разъем RP-SMA, поэтому он может использовать огромное разнообразие послепродажных антенн.

Особенности:
• Высокая мощность (200 мВт)
• 32 каналов
• Жгут проводов на заказ
• Micro Размерный
• Широкий диапазон напряжений (7 ~ 23V)

Технические характеристики:
Передающая частота: 5.6 ~ 5.9GHz
Рабочее напряжение: 7 ~ 23V
Выходная мощность: 200 мВт
Система ТВ: PAL / NTSC / SECAM авто
Разъем: RP-SMA (НЕ SMA)
Размер: 29 х 20 х 8,5 мм
Вес: 6,8 г (без антенны и проводов)
Рабочая температура: от -10 ° C ~ + 85 ° C

Каналы:
Группа A: 5865, 5845, 5825, 5805, 5785, 5765, 5745, 5725
Группа B: 5733, 5752, 5771, 5790, 5809, 5828, 5847, 5866
Группа E: 5705, 5685, 5665, 5645, 5885, 5905, 5925, 5945
Группа F: 5740, 5760, 5780, 5800, 5820, 5840, 5860, 5880

  • Артикул 640000004-0
  • Brand HobbyKing
  • Емкость ( мАч ) -
  • вес 76.0000
  • длина 130.00
  • Packaging Width 35.00
  • Высота 70.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

I'm actually happy that the transmitter outputs 4 volts instead of 5, because I'm using a tiny 1S cameras that prefers it. The power it provides is very well filtered, and initial test flights show NO motor noise. It does get kinda warm, so I mounted mine to an aluminum bracket that supports the antenna and camera. To maximize heat transfer I removed the sticker and didn't use any glue / tape, instead securing it with a nylon tie. This is for a Diatone ET 150 micro, so the heavy antenna connector had to go. Using a Dremmel I cut the legs where they clear the board, and the remaining legs easily desolder without any damage. Trying to heat them all at once is more difficult. A very light and flexible RHCP antenna is cut short and soldered on instead, and is also supported with a 2mm nylon tie. Channel selection is easy, the button sticks out the side for easy access. I haven't tested it for range yet, but the signal looks good. A big improvement of the "chip only" VTX I've used over the last year, at the same price.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I'm actually happy that the transmitter outputs 4 volts instead of 5, because I'm using a tiny 1S cameras that prefers it. The power it provides is very well filtered, and initial test flights show NO motor noise. It does get kinda warm, so I mounted mine to an aluminum bracket that supports the antenna and camera. To maximize heat transfer I removed the sticker and didn't use any glue / tape, instead securing it with a nylon tie. This is for a Diatone ET 150 micro, so the heavy antenna connector had to go. Using a Dremmel I cut the legs where they clear the board, and the remaining legs easily desolder without any damage. Trying to heat them all at once is more difficult. A very light and flexible RHCP antenna is cut short and soldered on instead, and is also supported with a 2mm nylon tie. Channel selection is easy, the button sticks out the side for easy access. I haven't tested it for range yet, but the signal looks good. A big improvement of the "chip only" VTX I've used over the last year, at the same price.

First of all it is working and outputs RF 5.8 Ghz. The 5 VDC outputs 3.99 VDC that cannot power my mini camera. So this is not a big deal so I get a BEC to power camera.

Channels is easy to change this is a true. I set mine to F band and all 8 channels is working. I am gong to mount it to 250 quad and will post update.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

First of all it is working and outputs RF 5.8 Ghz. The 5 VDC outputs 3.99 VDC that cannot power my mini camera. So this is not a big deal so I get a BEC to power camera.

Channels is easy to change this is a true. I set mine to F band and all 8 channels is working. I am gong to mount it to 250 quad and will post update.

Works great! I use it in my mini quad Easy to change channels. Small and tiny. Fits easy in a small vehichle. Gets hot so place it in airflow, but that is not a common problem in a mini quad

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Works great! I use it in my mini quad Easy to change channels. Small and tiny. Fits easy in a small vehichle. Gets hot so place it in airflow, but that is not a common problem in a mini quad

Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save