Matek F405-AIO Betaflight Flight Controller with OSD, Built-In PDB and Dual BEC

Matek are reknown for making great flight controllers and the F405-AIO is their latest creation. The F405-AIO has a built-in Betaflight OSD which includes current sensing  up to 200A and it has a dual BEC (5v@2A~9V@2A). This flight controller has a PDB for the perfect clean build and will also support PWM, Oneshot, Multishot and Dshot.

Other features of this controller are a F4 MCU, 6 axis 32K ICM20602 gyro and a micro SD blackbox and they all fit into this neat, intergrated package. Matek are the market leaders and this flight controller has been designed by professionals and will handle all the latest you can throw at it including Dshot 1200. The ICM 20602 gyro gets updates at 32KHz and the F4 MCU lets you run your PID loop at 16KHz. Combine that with 4 Dshot ESC's and you will be the slowest link in the system!!

If you plan to use powerful motors with your racing quad then the F405-AIO flight controller includes a low ESR capacitor to prevent voltage spike feedback from the motors damaging any of the electronics. Also supplied with the F405-AIO are 4 x M3 anti-vibration standoffs to minimise vibration and a XT-60 connector for connecting your favourite batteries.

Features:
• Fully integrated flight controller
• 6 axis 32Khz ICM20602 gyro
• F4 MCU
• Betaflight OSD
• 6 x PWM/Dshot outputs without conflict
• 4 UART's
• Side press button for BOOT (DFU) mode
• MicroSD for blackbox logging
• Dual Bec (5v@2A~9v@2A)
• Built in PDB (4 x 30A/Max 4 x 50A)
• 200A current sensor)
• Matek F405 target
• Max 32K gyro update and 16K PID loop frequency

Specs
Input: 9~27v (3~6S lipoly) w/TVS protection
PDB: 4 x 30A (max 4 x 50A) 6 layers 2ox copper PCB
LDO 3.3v: Max 300mA
MCU: STM32F405RGT6 (168MHz)
IMU: ICM-20602 (32KHz max)
OSD: Betaflight with AT7456E chip
Blackbox: MicroSD card slot (SD/SDHC with FAT32 format)
SBUS: Built-in inverter for SBUS input (UART2-RX)
RX2: UART2-RX for PPM, DSM2, DSMX, IBUS
RX1 & TX1: UART1 (bottom layer)
RX3 & TX3: UART3 (bottom layer)
RX4 & TX4: UART4
RX5 & TX5: UART5
FC Status: LED 0 (blue)~LED 1 (red)
3.3v Status: LED 2 (red)
BEC: 5v@2A~9v@2A
Dimensions: 36 x 51mm PCB with 30.5mm mounting holes and XT60 socket
Weight: 12g