Matek FCHUB-6S PDB w/Current Sensor 184A, BEC 5V & 10V, 3-6S Lipo
Matek FCHUB-6S PDB w/Current Sensor 184A, BEC 5V & 10V, 3-6S Lipo
Поделиться ссылкой
Matek has created another superb Power Distribution Board (PDB) capable of utilizing 3 to 6S lipo batteries. It will provide 120A current to four ESCs (30A each ESC). As well as this it provides regulated and filtered 5V DC (1.5A) and 10V DC (1.5A) outputs for powering items such as cameras, RC receiver, Flight Controllers, Video Transmitters, LEDs, etc.
This PDB also has built-in 184A current sensor and offers an FFC socket to conveniently connect to the MATEKSYS Flight Controller.
Features:
• 5V output designed for RC Receivers, Flight controllers, OSD, and Servos
• 10V output designed for RC Video TX or FPV cameras
• Input voltage 3S to 6S
• Total 4 pairs ESC solder tabs are fit for X type frame
• Max. 27V input w/ TVS protection
• Built-in current sensor 184A
• PDB: 4x30A (4x46A, 5 seconds), 4 layers x 2oz copper PCB
• BEC 5V/1.5A (2A Max) w/ 100uF Panasonic POSCAP filter
• BEC 10V/1.5A (2A Max.) w/ 47uF TDK MLCC filter
• 5V and 10V Output LED indicators & Short circuit tolerant
Physical Specs:
Mounting: 30.5 x 30.5mm, Φ3mm
Dimensions: 36 x 46 x 4 mm
Weight: 8.5g
Current Module Specs:
Max.range: 184A
3.3V ADC
Scale the output voltage to milliamps (1/10th mV/A): 179
BEC 5V Output Specs:
DC/DC synchronous buck regulator.
Voltage: 5.0 +/- 0.1VDC
Continuous current: 1.5 Amps (Max.2.0A 10s/minute)
Short-circuit tolerant (2 seconds/minute)
BEC 10V Output Specs:
Voltage: 10.0 +/- 0.2VDC
Continuous current: 1.5 Amps (Max.2.0A 10s/minute)
Short-circuit tolerant (2 seconds/minute)
10V can be used to power cameras labeled as 12V
The 3S LiPo input voltage should be 11V plus
Для загрузки видео необходима регистрация войти в систему или Зарегистрируйтесь
Для того, чтобы оставлять отзывы, необходимо зарегистрироваться войти в систему или Зарегистрируйтесь
Sami | Проверенный покупатель
-
Overall
-
Quality
-
Value
matek pdb
Jan 28, 2018
Зарегистрируйтесь, чтобы загружать файлы.
пожалуйста войти в систему или Зарегистрируйтесь Начните помогать коллегам по хобби!
