Matek FCHUB-VTX w/5.8G 25/200/500mW Video Tx and BFCMS Control

The ideal way to clean up your FPV racing drone is with this all in one PDB and video transmitter which has full Betaflight control. The board also has a 5V and 10V filtered output and is the perfect partner to the FC-405 and F722-STD flight controllers. The board has a standard button control to change channels and output power along with BFCMS via FC UART_TX making this a very flexible and easy to use VTX.

The 5.8g VTX output has 3 power bands, 25, 200 and 500mW and 40 standard channels, A/B/E/F and R band, these are changed with the button and LED control. The PDB supports 4 x 30A continuous and 4 x 46A for 5 seconds. It also has a 184A sensor with a 179 scale, a BEC output of 5V-1A for a camera or FC and is firmware upgradeable. Comes complete with a linear whip antenna and SMA extension cable so that you can customise with your own preferred FPV antenna.

Features:
• 5.8G VTX with 40 Std Channels A/B/E/F/R band
• VTX is switchable (25, 200, 500mW)
• Traditional button and LED control for frequency and power
• Input voltage 6~27V
• PDB is capable of 4 x 30A and 4 x 46A for 5secs only
• 184A current sensor with 179 scale
• 5V-1A BEC for camera or FC output
• BFCMS (BFOSD & LUA script) control via FC UART_TX
• Video signal & TX5 are ready on FFC connected with Matek FC F405-OSD
• Firmware upgradeable

Specs:
Type: Matek FCHUB-VTX w/5.8G 25/200/500mW Video Transmitter
Input Voltage: 6~27V (2~6S LiPo)
Output Current: 4 x 30A continuous, 4 x 46A for 5 seconds
Current Sensor: 184A (scale 179)
BEC Output: 5V-1A for camera or FC
VTX Max Power Consumption: 3.1W@500mW
Video Impedence: 75Ω
Audio Subcarrier Frequency: 6.5MHz
RF Connector: MMCX
Video Format: NTSC/PAL
Dimensions: 36 x 45 x 7mm
Mounting Holes: 30.5 x 30.5mm
Weight: 14g with MMCX whip antenna

Included:
Matek FCHUB-VTX w/5.8G 25/200/500mW Video Transmitter
Rubycon ZLH 35V/47 OuF Low ESR Capacitor
9cm MMCX to SMA Female RG178 Cable
8cm MMCX 5.8G Whip Antenna RGA Cable

Please note: A user manual is available under the "Files" tab.

Attention Customers

** The use and operation of this product in some countries may require a license based on local government restrictions.  Ensure you check your local government rules before operating this device. **