Стать поставщиком Блог Новинки
Зарегистрируйтесь

Итоговая цена

0,00 A$

Корзина 0 Корзина 0 Loading...

MATEKSYS Betaflight F405-CTR Flight Controller w/ OSD, PDB, Blackbox & BEC Current Sensor

Generating Links

MATEKSYS Betaflight F405-CTR Flight Controller w/ OSD, PDB, Blackbox & BEC Current Sensor

Цена:
63,59 A$
Уже купили Discontinued Product

Please continue searching for a similar product.
Артикул:
9090000042-0
Хотите бесплатную доставку? кликните сюда Узнать больше!

The Mateksys F405-CTR flight controller has all the features of the original F405-OSD but now with the addition of a BMP280 barometer. The high-speed 168MHz 32bit F405 processor with BetaFlight firmware, OSD and BMP280 barometer gives this flight controller the power to easily control your drone.


It also has a blackbox to help you fine tune or to help determine what went wrong with any mishap. The OSD provides detailed information on battery voltage and other information. Also included is a PDB with an onboard 5V 2A continuous BEC system with 184A current sensor. This flight controller board is lightweight (only 10g) and because it has standard 30.5 x 30.5mm mounting holes in can easily fit into any drone.


Features:
• 168MHz STM32F405RGT6
• 6-axis MPU6000 accelerometer/gyro (SPI)
• BetaFlight OSD with AT7456E chip
• BMP280 (12C) barometer
• 4 x 30A 6 layer PDB
• 5V 2A continuous BEC (3A burst)
• 184A current sensor
• MicroSD BlackBox (SD/SDHC)
• VCP and 5 x UARTs
• 6 PWM/DSHOT outputs
• 12CI and DAC
• BF/NAV MatekF405 Target


Specs:
Input Voltage: 6~30V DC
MCU: 168MHz STM32F405
IMU: MPU6000 accelerometer/gyro (SPI) (6-axis)
Barometer: BMP280 (12C)
OSD: BetaFlight OSD w/ AT7456E chip
Blackbox: MicroSD card slot (SD/SDHC)
VCP: UART1, UART2, UART3, UART4, UART5
SBUS: Built in inverter for SBUS input (UART2-RX)
PPM/UART Shared: UART2-RX
SoftSerial Support: On S5 & S6
Camera Control: On S6 or DAC (optional)
VTX: Smartaudio and Tramp VTX protocol supported
Lights: WS2812 LED strip
Current Sensor: 184A
BEC: 5V 2A continuous (3A burst)
Voltage meter Scale: 1:10
LDO 3.3V: Max.300mA for Spektrum RX
Beeper: Yes
RSSI: Yes
Status LED's: 3 x LED's for FC STATUS (Blue, Red & 3.3V Red indicator)
PWM: 6 x PWM/DShot outputs without conflict
UART's: 5
Connections: 1 x group of G/S1/S2/S3/S4 pads for 4in1 ESC Signal/GND
                      4 x pairs of corner pads for ESC Signal/GND connections (DSHOT compatible)
                      1 x pair 12CI pads
Button: 1 x side-press button for BOOT(DFU) mode
Dimensions: 36x46mm PCB with 30.5mm mounting holes
Weight: 10g


Includes:
1 x Mateksys FC F405-CTR
1 x Rubycon ZLH 35V/470uF (Low ESR)
6 x Silicone M4 to M3 grommets
1 x FR4 PCB plate 36 x 36 x 1mm

Requires:
1 x Micro SD card (Up to 4GB)

Загрузить видео

Для загрузки видео необходима регистрация войти в систему или Зарегистрируйтесь

Темы
Сортировать по
Самые последние темы
* Псевдоним пользователя:

* Ваш ответ:


Пожалуйста, введите текст, показанный на картинке, в поле ниже
*Код верификации:
Отменить
Отправить
Опубликовать новую тему
* Псевдоним пользователя:

* Ваша тема:



Пожалуйста, введите текст, показанный на картинке, в поле ниже
*Код верификации:
Опубликовать тему

Для того, чтобы оставлять отзывы, необходимо зарегистрироваться войти в систему или Зарегистрируйтесь

JustAskDave | Проверенный покупатель

  • Overall
  • Quality
  • Value

Excellent

Aug 29, 2019

Running with iNAV on an 880mm quad with an external GPS/Compass. Works perfectly for Altitude hold, Position hold and heading hold. Return to home and land works great too.

eme | Проверенный покупатель

  • Overall
  • Quality
  • Value

you do not want ohter

Jun 20, 2019

Compact, easy to build. Just great fc with pdb.

Willie | Проверенный покупатель

  • Overall
  • Quality
  • Value

Fried MCU

Jun 18, 2019

I was able to fly with this a few flights FPV and it seemed to work perfectly. It survived a few crashes (no reason why it shouldn't survive though) but after a slightly rougher landing, the device quit working.
Just like with Colin, the MCU's VCC and VSS are in a dead short. This is a strange way for an MCU to die after a crash. I confirmed it's the MCU that fried. I'm guessing a high voltage found it's way into an I/O pin.
Many features, but quite disappointed in the product as protective features have been overlooked

Colin | Проверенный покупатель

  • Overall
  • Quality
  • Value

Dropped out of the sky on its maiden

Jun 01, 2019

Replaced a dead Mamba FC with this Matek, did a short hover and LOS flight on 3S and it performed well. Second flight it dropped out of the sky. Seems to be dead shorted across the power lines inside the board, it let out the magic smoke.
Disappointed that the two lines are so close together, likely causing this issue. Would not recommend.

Anthony | Проверенный покупатель

  • Overall
  • Quality
  • Value

nice flight controller

Mar 18, 2019

would recommend worth the money i'd be again thanks HK!

Damijan | Проверенный покупатель

  • Overall
  • Quality
  • Value

Good controller

Feb 14, 2019

i like the fact it has MPU6000 sensor, OSD, baro and current sensor integrated, had some trouble with omnibus so i decided to buy this one... hope it will do better, for now all good, time will show.

Загрузить файл

Зарегистрируйтесь, чтобы загружать файлы.
пожалуйста войти в систему или Зарегистрируйтесь Начните помогать коллегам по хобби!